[PATCH] drm/i915: use for_each_intel_connector_iter in intel_display.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This gets rid of the last users of for_each_intel_connector(), remove
that too.

The one exception is the loop in verify_encoder_state - that needs to
switch over to for_each_connector_in_state.

v2: Maarten corrected me that in the state verifier we indeed must
only walk connectors in the atomic commit, not all of them!

Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_drv.h      |  5 -----
 drivers/gpu/drm/i915/intel_display.c | 29 ++++++++++++++++++++---------
 2 files changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 57914f008ed8..fe2b37fe0b91 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -488,11 +488,6 @@ struct i915_hotplug {
 			    &(dev)->mode_config.encoder_list,	\
 			    base.head)
 
-#define for_each_intel_connector(dev, intel_connector)		\
-	list_for_each_entry(intel_connector,			\
-			    &(dev)->mode_config.connector_list,	\
-			    base.head)
-
 #define for_each_intel_connector_iter(intel_connector, iter) \
 	while ((intel_connector = to_intel_connector(drm_connector_list_iter_next(iter))))
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 438d27f93aca..9715c64eeb08 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12661,8 +12661,10 @@ static const struct drm_crtc_helper_funcs intel_helper_funcs = {
 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
 {
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
-	for_each_intel_connector(dev, connector) {
+	drm_connector_list_iter_get(dev, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->base.state->crtc)
 			drm_connector_unreference(&connector->base);
 
@@ -12678,6 +12680,7 @@ static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
 			connector->base.state->crtc = NULL;
 		}
 	}
+	drm_connector_list_iter_put(&conn_iter);
 }
 
 static void
@@ -13606,10 +13609,12 @@ verify_connector_state(struct drm_device *dev,
 }
 
 static void
-verify_encoder_state(struct drm_device *dev)
+verify_encoder_state(struct drm_device *dev, struct drm_atomic_state *state)
 {
 	struct intel_encoder *encoder;
-	struct intel_connector *connector;
+	struct drm_connector *connector;
+	struct drm_connector_state *old_conn_state;
+	int i;
 
 	for_each_intel_encoder(dev, encoder) {
 		bool enabled = false;
@@ -13619,12 +13624,12 @@ verify_encoder_state(struct drm_device *dev)
 			      encoder->base.base.id,
 			      encoder->base.name);
 
-		for_each_intel_connector(dev, connector) {
-			if (connector->base.state->best_encoder != &encoder->base)
+		for_each_connector_in_state(state, connector, old_conn_state, i) {
+			if (connector->state->best_encoder != &encoder->base)
 				continue;
 			enabled = true;
 
-			I915_STATE_WARN(connector->base.state->crtc !=
+			I915_STATE_WARN(connector->state->crtc !=
 					encoder->base.crtc,
 			     "connector's crtc doesn't match encoder crtc\n");
 		}
@@ -13827,7 +13832,7 @@ static void
 intel_modeset_verify_disabled(struct drm_device *dev,
 			      struct drm_atomic_state *state)
 {
-	verify_encoder_state(dev);
+	verify_encoder_state(dev, state);
 	verify_connector_state(dev, state, NULL);
 	verify_disabled_dpll_state(dev);
 }
@@ -16638,6 +16643,7 @@ int intel_modeset_init(struct drm_device *dev)
 static void intel_enable_pipe_a(struct drm_device *dev)
 {
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 	struct drm_connector *crt = NULL;
 	struct intel_load_detect_pipe load_detect_temp;
 	struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
@@ -16645,12 +16651,14 @@ static void intel_enable_pipe_a(struct drm_device *dev)
 	/* We can't just switch on the pipe A, we need to set things up with a
 	 * proper mode and output configuration. As a gross hack, enable pipe A
 	 * by enabling the load detect pipe once. */
-	for_each_intel_connector(dev, connector) {
+	drm_connector_list_iter_get(dev, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
 			crt = &connector->base;
 			break;
 		}
 	}
+	drm_connector_list_iter_put(&conn_iter);
 
 	if (!crt)
 		return;
@@ -16896,6 +16904,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 	struct intel_crtc *crtc;
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 	int i;
 
 	dev_priv->active_crtcs = 0;
@@ -16973,7 +16982,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      pipe_name(pipe));
 	}
 
-	for_each_intel_connector(dev, connector) {
+	drm_connector_list_iter_get(dev, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->get_hw_state(connector)) {
 			connector->base.dpms = DRM_MODE_DPMS_ON;
 
@@ -17001,6 +17011,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      connector->base.base.id, connector->base.name,
 			      enableddisabled(connector->base.encoder));
 	}
+	drm_connector_list_iter_put(&conn_iter);
 
 	for_each_intel_crtc(dev, crtc) {
 		crtc->base.hwmode = crtc->config->base.adjusted_mode;
-- 
2.11.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux