On Thu, Dec 15, 2016 at 03:56:03PM +0100, Maarten Lankhorst wrote:
> Op 12-12-16 om 21:35 schreef ville.syrjala@xxxxxxxxxxxxxxx:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > In a lot of place we wish to know which planes on the crtc are actually
> > visible, or how many of them there are. Let's start tracking that in a
> > bitmask in the crtc state.
> >
> > We already track enabled planes (ie. ones with an fb and crtc specified by
> > the user) but that's not quite the same thing as enabled planes may
> > still end up being invisible due to clipping and whatnot.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_atomic_plane.c | 6 +++
> > drivers/gpu/drm/i915/intel_display.c | 79 +++++++++++++++++++++----------
> > drivers/gpu/drm/i915/intel_drv.h | 3 ++
> > 3 files changed, 64 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
> > index dbe9fb41ae53..7ec12edda4d4 100644
> > --- a/drivers/gpu/drm/i915/intel_atomic_plane.c
> > +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
> > @@ -181,6 +181,12 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
> > if (ret)
> > return ret;
> >
> > + /* FIXME pre-g4x don't work like this */
> > + if (intel_state->base.visible)
> > + crtc_state->active_planes |= BIT(intel_plane->id);
> > + else
> > + crtc_state->active_planes &= ~BIT(intel_plane->id);
> > +
> > return intel_plane_atomic_calc_changes(&crtc_state->base, state);
> > }
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index bc1af87789bc..3f027341b0f3 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2741,6 +2741,29 @@ update_state_fb(struct drm_plane *plane)
> > }
> >
> > static void
> > +intel_set_plane_visible(struct intel_crtc_state *crtc_state,
> > + struct intel_plane_state *plane_state,
> > + bool visible)
> > +{
> > + struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
> > +
> > + plane_state->base.visible = visible;
> > +
> > + /* FIXME pre-g4x don't work like this */
> > + if (visible) {
> > + crtc_state->base.plane_mask |= BIT(drm_plane_index(&plane->base));
> > + crtc_state->active_planes |= BIT(plane->id);
> > + } else {
> > + crtc_state->base.plane_mask &= ~BIT(drm_plane_index(&plane->base));
> > + crtc_state->active_planes &= ~BIT(plane->id);
> > + }
> > +
> > + DRM_DEBUG_KMS("%s active planes 0x%x\n",
> > + crtc_state->base.crtc->name,
> > + crtc_state->active_planes);
> > +}
> > +
> > +static void
> > intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> > struct intel_initial_plane_config *plane_config)
> > {
> > @@ -2798,8 +2821,9 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> > * simplest solution is to just disable the primary plane now and
> > * pretend the BIOS never had it enabled.
> > */
> > - to_intel_plane_state(plane_state)->base.visible = false;
> > - crtc_state->plane_mask &= ~(1 << drm_plane_index(primary));
> > + intel_set_plane_visible(to_intel_crtc_state(crtc_state),
> > + to_intel_plane_state(plane_state),
> > + false);
> > intel_pre_disable_primary_noatomic(&intel_crtc->base);
> > intel_plane->disable_plane(primary, &intel_crtc->base);
> >
> > @@ -2826,7 +2850,11 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> > drm_framebuffer_reference(fb);
> > primary->fb = primary->state->fb = fb;
> > primary->crtc = primary->state->crtc = &intel_crtc->base;
> > - intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
> > +
> > + intel_set_plane_visible(to_intel_crtc_state(intel_crtc->base.state),
> > + to_intel_plane_state(primary->state),
> > + true);
> > +
> > atomic_or(to_intel_plane(primary)->frontbuffer_bit,
> > &obj->frontbuffer_bits);
> > }
> > @@ -12440,11 +12468,11 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc_state);
> > struct drm_crtc *crtc = crtc_state->crtc;
> > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > - struct drm_plane *plane = plane_state->plane;
> > + struct intel_plane *plane = to_intel_plane(plane_state->plane);
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > struct intel_plane_state *old_plane_state =
> > - to_intel_plane_state(plane->state);
> > + to_intel_plane_state(plane->base.state);
> > bool mode_changed = needs_modeset(crtc_state);
> > bool was_crtc_enabled = crtc->state->active;
> > bool is_crtc_enabled = crtc_state->active;
> > @@ -12452,7 +12480,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > struct drm_framebuffer *fb = plane_state->fb;
> > int ret;
> >
> > - if (INTEL_GEN(dev_priv) >= 9 && plane->type != DRM_PLANE_TYPE_CURSOR) {
> > + if (INTEL_GEN(dev_priv) >= 9 && plane->id != PLANE_CURSOR) {
> > ret = skl_update_scaler_plane(
> > to_intel_crtc_state(crtc_state),
> > to_intel_plane_state(plane_state));
> > @@ -12476,8 +12504,10 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > * per-plane wm computation to the .check_plane() hook, and
> > * only combine the results from all planes in the current place?
> > */
> > - if (!is_crtc_enabled)
> > + if (!is_crtc_enabled) {
> > to_intel_plane_state(plane_state)->base.visible = visible = false;
> > + to_intel_crtc_state(crtc_state)->active_planes &= ~BIT(plane->id);
> > + }
> >
> > if (!was_visible && !visible)
> > return 0;
> > @@ -12489,13 +12519,12 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > turn_on = visible && (!was_visible || mode_changed);
> >
> > DRM_DEBUG_ATOMIC("[CRTC:%d:%s] has [PLANE:%d:%s] with fb %i\n",
> > - intel_crtc->base.base.id,
> > - intel_crtc->base.name,
> > - plane->base.id, plane->name,
> > + intel_crtc->base.base.id, intel_crtc->base.name,
> > + plane->base.base.id, plane->base.name,
> > fb ? fb->base.id : -1);
> >
> > DRM_DEBUG_ATOMIC("[PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
> > - plane->base.id, plane->name,
> > + plane->base.base.id, plane->base.name,
> > was_visible, visible,
> > turn_off, turn_on, mode_changed);
> >
> > @@ -12503,15 +12532,15 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > pipe_config->update_wm_pre = true;
> >
> > /* must disable cxsr around plane enable/disable */
> > - if (plane->type != DRM_PLANE_TYPE_CURSOR)
> > + if (plane->id != PLANE_CURSOR)
> > pipe_config->disable_cxsr = true;
> > } else if (turn_off) {
> > pipe_config->update_wm_post = true;
> >
> > /* must disable cxsr around plane enable/disable */
> > - if (plane->type != DRM_PLANE_TYPE_CURSOR)
> > + if (plane->id != PLANE_CURSOR)
> > pipe_config->disable_cxsr = true;
> > - } else if (intel_wm_need_update(plane, plane_state)) {
> > + } else if (intel_wm_need_update(&plane->base, plane_state)) {
> > /* FIXME bollocks */
> > pipe_config->update_wm_pre = true;
> > pipe_config->update_wm_post = true;
> > @@ -12523,7 +12552,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > to_intel_crtc_state(crtc_state)->wm.need_postvbl_update = true;
> >
> > if (visible || was_visible)
> > - pipe_config->fb_bits |= to_intel_plane(plane)->frontbuffer_bit;
> > + pipe_config->fb_bits |= plane->frontbuffer_bit;
> >
> > /*
> > * WaCxSRDisabledForSpriteScaling:ivb
> > @@ -12531,7 +12560,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> > * cstate->update_wm was already set above, so this flag will
> > * take effect when we commit and program watermarks.
> > */
> > - if (plane->type == DRM_PLANE_TYPE_OVERLAY && IS_IVYBRIDGE(dev_priv) &&
> > + if (plane->id == PLANE_SPRITE0 && IS_IVYBRIDGE(dev_priv) &&
> > needs_scaling(to_intel_plane_state(plane_state)) &&
> > !needs_scaling(old_plane_state))
> > pipe_config->disable_lp_wm = true;
> > @@ -16876,15 +16905,14 @@ static bool primary_get_hw_state(struct intel_plane *plane)
> > /* FIXME read out full plane state for all planes */
> > static void readout_plane_state(struct intel_crtc *crtc)
> > {
> > - struct drm_plane *primary = crtc->base.primary;
> > - struct intel_plane_state *plane_state =
> > - to_intel_plane_state(primary->state);
> > + struct intel_plane *primary = to_intel_plane(crtc->base.primary);
> > + bool visible;
> >
> > - plane_state->base.visible = crtc->active &&
> > - primary_get_hw_state(to_intel_plane(primary));
> > + visible = crtc->active && primary_get_hw_state(primary);
> >
> > - if (plane_state->base.visible)
> > - crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
> > + intel_set_plane_visible(to_intel_crtc_state(crtc->base.state),
> > + to_intel_plane_state(primary->base.state),
> > + visible);
> > }
> >
> > static void intel_modeset_readout_hw_state(struct drm_device *dev)
> > @@ -17171,7 +17199,10 @@ void intel_modeset_gem_init(struct drm_device *dev)
> > c->primary->fb = NULL;
> > c->primary->crtc = c->primary->state->crtc = NULL;
> > update_state_fb(c->primary);
> > - c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
> > +
> > + intel_set_plane_visible(to_intel_crtc_state(c->state),
> > + to_intel_plane_state(c->primary->state),
> > + false);
> > }
> > }
> > }
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 8f4ddca0f521..20ba8f48bc3b 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -669,6 +669,9 @@ struct intel_crtc_state {
> >
> > /* Gamma mode programmed on the pipe */
> > uint32_t gamma_mode;
> > +
> > + /* bitmask of visible planes (enum plane_id) */
> > + u8 active_planes;
> Can we change this to uint32_t 1<<drm_plane_index like the other masks?
>
> plane_mask, connector_mask and encoder_mask use 1 << index.
> Perhaps name it active_planes_mask too.
The way I use it wouldn't lend itself well to that. I don't have any
plane structs around in a bunch of the places where this gets used.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
