[GLK MIPI DSI V1 3/9] drm/i915/glk: Add MIPIIO Enable/disable sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Deepak M <m.deepak@xxxxxxxxx>

Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
Signed-off-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dsi.c | 130 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 130 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 34bbdc2..729fcc9 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -357,6 +357,130 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
 	return true;
 }
 
+static void intel_dsi_disable_mipiio(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	enum port port;
+	u32 tmp;
+
+	/* Put the IO into reset */
+	tmp = I915_READ(MIPI_CTRL(PORT_A));
+	tmp &= ~MIPIIO_RESET;
+	I915_WRITE(MIPI_CTRL(PORT_A), tmp);
+
+	/* Wait for MIPI PHY status bit to unset */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		if (intel_wait_for_register(dev_priv,
+				MIPI_CTRL(port), PHY_STATUS, 0, 20))
+			DRM_ERROR("PHY is not turning OFF\n");
+	}
+
+	/* Clear MIPI mode */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		tmp = I915_READ(MIPI_CTRL(port));
+		tmp &= ~MIPI_MODE;
+		I915_WRITE(MIPI_CTRL(port), tmp);
+	}
+}
+
+static void intel_dsi_enable_mipiio(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	enum port port;
+	u32 tmp, val;
+
+	/* Put the IO into reset */
+	tmp = I915_READ(MIPI_CTRL(PORT_A));
+	tmp &= ~MIPIIO_RESET;
+	I915_WRITE(MIPI_CTRL(PORT_A), tmp);
+
+	/* Program LP Wake */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		tmp = I915_READ(MIPI_CTRL(port));
+		tmp &= ~LP_WAKE;
+		I915_WRITE(MIPI_CTRL(port), tmp);
+	}
+
+	/* Set the MIPI mode */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		tmp = I915_READ(MIPI_CTRL(port));
+		I915_WRITE(MIPI_CTRL(port), tmp | MIPI_MODE);
+	}
+
+	/* Wait for Pwr ACK */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		if (intel_wait_for_register(dev_priv,
+				MIPI_CTRL(port), PWR_ACK, PWR_ACK, 20))
+			DRM_ERROR("Power ACK not received\n");
+	}
+
+	/* Wait for MIPI PHY status bit to set */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		if (intel_wait_for_register(dev_priv,
+				MIPI_CTRL(port), PHY_STATUS, PHY_STATUS, 20))
+			DRM_ERROR("PHY is not ON\n");
+	}
+
+	/* Get IO out of reset */
+	tmp = I915_READ(MIPI_CTRL(PORT_A));
+	I915_WRITE(MIPI_CTRL(PORT_A), tmp | MIPIIO_RESET);
+
+	/* Get IO out of Low power state*/
+	for_each_dsi_port(port, intel_dsi->ports) {
+		if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
+			val = I915_READ(MIPI_DEVICE_READY(port));
+			val &= ~ULPS_STATE_MASK;
+			val |= DEVICE_READY;
+			I915_WRITE(MIPI_DEVICE_READY(port), val);
+			usleep_range(10, 15);
+		}
+
+		/* Enter ULPS */
+		val = I915_READ(MIPI_DEVICE_READY(port));
+		val &= ~ULPS_STATE_MASK;
+		val |= (ULPS_STATE_ENTER | DEVICE_READY);
+		I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+		/* Wait for ULPS Not active */
+		if (intel_wait_for_register(dev_priv,
+			MIPI_CTRL(port), ULPS_NOT_ACTIVE, ULPS_NOT_ACTIVE, 20))
+
+		/* Exit ULPS */
+		val = I915_READ(MIPI_DEVICE_READY(port));
+		val &= ~ULPS_STATE_MASK;
+		val |= (ULPS_STATE_EXIT | DEVICE_READY);
+		I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+		/* Enter Normal Mode */
+		val = I915_READ(MIPI_DEVICE_READY(port));
+		val &= ~ULPS_STATE_MASK;
+		val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
+		I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+		tmp = I915_READ(MIPI_CTRL(port));
+		tmp &= ~LP_WAKE;
+		I915_WRITE(MIPI_CTRL(port), tmp);
+	}
+
+	/* Wait for Stop state */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		if (intel_wait_for_register(dev_priv,
+				MIPI_CTRL(port), DATA_LANE_STOP_STATE,
+					DATA_LANE_STOP_STATE, 20))
+			DRM_ERROR("Date lane not in STOP state\n");
+	}
+
+	/* Wait for AFE LATCH */
+	for_each_dsi_port(port, intel_dsi->ports) {
+		if (intel_wait_for_register(dev_priv,
+				BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT,
+					AFE_LATCHOUT, 20))
+			DRM_ERROR("D-PHY not entering LP-11 state\n");
+	}
+}
+
 static void bxt_dsi_device_ready(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -559,6 +683,9 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 
 	intel_dsi_prepare(encoder, pipe_config);
 
+	if (IS_GEMINILAKE(dev_priv))
+		intel_dsi_enable_mipiio(encoder);
+
 	/* Panel Enable over CRC PMIC */
 	if (intel_dsi->gpio_panel)
 		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
@@ -699,6 +826,9 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
 		usleep_range(2000, 2500);
 	}
 
+	if (IS_GEMINILAKE(dev_priv))
+		intel_dsi_disable_mipiio(encoder);
+
 	intel_disable_dsi_pll(encoder);
 }
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux