Hi,
On 05-12-16 19:52, Ville Syrjälä wrote:
On Fri, Dec 02, 2016 at 03:29:04PM +0100, Hans de Goede wrote:
On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.
The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.
Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.
This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment
Pushed to dinq with s/BugLink/Bugzilla/ and changelog moved into the
commit message proper. Thanks for the patch.
Thank you, what about the other 2 bug-fix patches, the
assert/deassert swap one and the one setting the gpio_en bit for
cherryview ?
Regards,
Hans
---
drivers/gpu/drm/i915/intel_runtime_pm.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 356c662..87b4af0 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1039,7 +1039,18 @@ static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
{
- I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
+ u32 val;
+
+ /*
+ * On driver load, a pipe may be active and driving a DSI display.
+ * Preserve DPOUNIT_CLOCK_GATE_DISABLE to avoid the pipe getting stuck
+ * (and never recovering) in this case. intel_dsi_post_disable() will
+ * clear it when we turn off the display.
+ */
+ val = I915_READ(DSPCLK_GATE_D);
+ val &= DPOUNIT_CLOCK_GATE_DISABLE;
+ val |= VRHUNIT_CLOCK_GATE_DISABLE;
+ I915_WRITE(DSPCLK_GATE_D, val);
/*
* Disable trickle feed and enable pnd deadline calculation
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
