On Thu, 01 Dec 2016, Hans de Goede <hdegoede@xxxxxxxxxx> wrote: > Document the DSI panel enable / disable sequences from the spec, > for easy comparison between the code and the spec. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> I haven't done a proper review, but patches 1-8 are Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx> > --- > drivers/gpu/drm/i915/intel_dsi.c | 64 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 64 insertions(+) > > diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c > index 2222229..85b748d 100644 > --- a/drivers/gpu/drm/i915/intel_dsi.c > +++ b/drivers/gpu/drm/i915/intel_dsi.c > @@ -555,6 +555,70 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder, > struct intel_crtc_state *pipe_config); > static void intel_dsi_unprepare(struct intel_encoder *encoder); > > +/* > + * Panel enable/disable sequences from the spec: > + * > + * v2 sequence for video mode: > + * - power on > + * - wait t1+t2 > + * - MIPIDeassertResetPin > + * - clk/data lines to lp-11 > + * - MIPISendInitialDcsCmds > + * - turn on DPI > + * - MIPIDisplayOn > + * - wait t5 > + * - backlight on > + * ... > + * - backlight off > + * - wait t6 > + * - MIPIDisplayOff > + * - turn off DPI > + * - clk/data lines to lp-00 > + * - MIPIAssertResetPin > + * - wait t3 > + * - power off > + * - wait t4 > + * > + * v3 sequence for video mode: > + * - MIPIPanelPowerOn > + * - MIPIDeassertResetPin > + * - set clk/data lines to lp-11 > + * - MIPISendInitialDcsCmds (LP) > + * - turn on DPI > + * - MIPITearOn (command mode only) + MIPIDisplayOn (LP and HS) > + * - MIPIBacklightOn > + * ... > + * - MIPIBacklightOff > + * - turn off DPI > + * - MIPITearOff + MIPIDisplayOff (LP) > + * - clk/data lines to lp-00 > + * - MIPIAssertResetPin > + * - MIPIPanelPowerOff > + * > + * sequence for command mode: > + * - power on > + * - wait t1+t2 > + * - MIPIDeassertResetPin > + * - clk/data lines to lp-11 > + * - MIPISendInitialDcsCmds > + * - MIPITearOn > + * - MIPIDisplayOn > + * - set pipe to dsr mode > + * - wait t5 > + * - backlight on > + * ... issue write_mem_start/write_mem_continue commands ... > + * - backlight off > + * - wait t6 > + * - disable pipe dsr mode > + * - MIPITearOff > + * - MIPIDisplayOff > + * - clk/data lines to lp-00 > + * - MIPIAssertResetPin > + * - wait t3 > + * - power off > + * - wait t4 > + */ > + > static void intel_dsi_pre_enable(struct intel_encoder *encoder, > struct intel_crtc_state *pipe_config, > struct drm_connector_state *conn_state) -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
