Instead of calling wait_for_dsi_fifo_empty on all dsi ports after calling
a drm_panel_foo helper which calls VBT sequences, move it to the VBT
mipi_exec_send_packet helper, which is the one VBT instruction which
actually puts data in the fifo.
This results in a nice cleanup making it clearer what all the steps on
intel_dsi_enable / disable are and this also makes the VBT code properly
wait till a command has actually been send before executing the next
steps (typically a delay) in the VBT sequence.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi.c | 12 +-----------
drivers/gpu/drm/i915/intel_dsi.h | 2 ++
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 2 ++
3 files changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3bc6213..587ba07 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -80,7 +80,7 @@ enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt)
}
}
-static void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
+void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
@@ -528,9 +528,6 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
drm_panel_enable(intel_dsi->panel);
- for_each_dsi_port(port, intel_dsi->ports)
- wait_for_dsi_fifo_empty(intel_dsi, port);
-
intel_dsi_port_enable(encoder);
}
@@ -546,7 +543,6 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
- enum port port;
DRM_DEBUG_KMS("\n");
@@ -579,9 +575,6 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
drm_panel_prepare(intel_dsi->panel);
- for_each_dsi_port(port, intel_dsi->ports)
- wait_for_dsi_fifo_empty(intel_dsi, port);
-
/* Enable port in pre-enable phase itself because as per hw team
* recommendation, port should be enabled befor plane & pipe */
intel_dsi_enable(encoder);
@@ -652,9 +645,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
/* if disable packets are sent before sending shutdown packet then in
* some next enable sequence send turn on packet error is observed */
drm_panel_disable(intel_dsi->panel);
-
- for_each_dsi_port(port, intel_dsi->ports)
- wait_for_dsi_fifo_empty(intel_dsi, port);
}
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 5967ea6..d567823 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -130,6 +130,8 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
return container_of(encoder, struct intel_dsi, base.base);
}
+void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi, enum port port);
+
bool intel_dsi_pll_is_enabled(struct drm_i915_private *dev_priv);
int intel_compute_dsi_pll(struct intel_encoder *encoder,
struct intel_crtc_state *config);
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 47cd1b2..b5a02c6 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -191,6 +191,8 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
break;
}
+ wait_for_dsi_fifo_empty(intel_dsi, port);
+
out:
data += len;
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
