On Tue, Nov 29, 2016 at 04:06:31PM +0200, Ville Syrjälä wrote:
> On Tue, Nov 29, 2016 at 02:06:20PM +0100, Hans de Goede wrote:
> > Hi,
> >
> > Thanks for the quick reply.
> >
> > On 29-11-16 13:48, Ville Syrjälä wrote:
> > > On Tue, Nov 29, 2016 at 01:38:57PM +0100, Hans de Goede wrote:
> > >> Looking at the ADF code from the Android kernel sources for a
> > >> cherrytrail tablet I noticed that it is calling the
> > >> MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook.
> > >>
> > >> Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences
> > >> in panel prepare/unprepare hooks") the mainline i915 code was doing the
> > >> same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET /
> > >> MIPI_SEQ_DEASSERT_RESET.
> > >>
> > >> Looking at the naming of the sequences that is the right thing to do,
> > >> but the problem is, that the old mainline code and the ADF code was
> > >> actually calling the right sequence (tested on a cube iwork8 air tablet),
> > >> and the swapping of the calling breaks things.
> > >>
> > >> This breakage was likely not noticed in testing because on cherrytrail,
> > >> currently chv_exec_gpio ends up disabling the gpio pins rather then
> > >> setting them (this is fixed in the next patch in this patch-set).
> > >>
> > >> This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's
> > >> places in the enum defining them, so that their (new) names match their
> > >> actual use.
> > >>
> > >> Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...")
> > >> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > >> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> > >> ---
> > >> drivers/gpu/drm/i915/intel_bios.h | 4 ++--
> > >> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 4 ++--
> > >> 2 files changed, 4 insertions(+), 4 deletions(-)
> > >>
> > >> diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
> > >> index 8405b5a..642a5eb 100644
> > >> --- a/drivers/gpu/drm/i915/intel_bios.h
> > >> +++ b/drivers/gpu/drm/i915/intel_bios.h
> > >> @@ -49,11 +49,11 @@ struct edp_power_seq {
> > >> /* MIPI Sequence Block definitions */
> > >> enum mipi_seq {
> > >> MIPI_SEQ_END = 0,
> > >> - MIPI_SEQ_ASSERT_RESET,
> > >> + MIPI_SEQ_DEASSERT_RESET,
> > >> MIPI_SEQ_INIT_OTP,
> > >> MIPI_SEQ_DISPLAY_ON,
> > >> MIPI_SEQ_DISPLAY_OFF,
> > >> - MIPI_SEQ_DEASSERT_RESET,
> > >> + MIPI_SEQ_ASSERT_RESET,
> > >
> > > That naming would be against the spec, so I don't think we want to do it
> > > like this. Unless the spec is totally wrong, that is.
> >
> > Given that both the ADF code and the i915 driver until now have been using
> > assert on prepare and deassert on unprepare I'm inclined to believe that
> > the spec is wrong. Is the spec available somewhere public ?
>
> I don't think so. And sadly even if it would it wouldn't really help
> since about the only thing it says is:
>
> 00 – Reserved
> 01 - MIPIAssertResetPin
> 02 – MIPISendInitialDcsCmds (Use this sequence type for sending initialization commands in LP mode)
> 03 - MIPIDisplayOn (Use this sequence type for sending initialization commands in HS mode)
> 04 – MIPIDisplayOff (Use this sequence type for sending DisplayOff commands in LP mode)
> 05 – MIPIDeassertResetPin
> 06 – MIPIBacklightOn
> 07 - MIPIBacklightOff
> 08 – MIPITearOn
> 09 - MIPITearOff
> 10 - MIPIPanelPowerOn
> 11 - MIPIPanelPowerOff
> Others – Reserved
>
> So pretty much useless if you actually want to write a working driver.
>
> >
> > Also if you look at the v1 sequences with the new names:
> >
> > MIPI_SEQ_DEASSERT_RESET,
> > MIPI_SEQ_INIT_OTP,
> > MIPI_SEQ_DISPLAY_ON,
> > MIPI_SEQ_DISPLAY_OFF,
> > MIPI_SEQ_ASSERT_RESET,
> >
> > Then they are exactly in the order as one would call them on
> > enable, followed by disable, which I believe is not a coincidence.
> >
> > > Can you provide the VBT for the affected machine so other people can
> > > have a look at it?
> >
> > Sure I can do that, what would be the easiest way (both for me to
> > produce and for you to consume) to do this ?
>
> /sys/kernel/debug/dri/0/i915_opregion
>
> For the best chance of preserving the dump for posterity I would
> suggest filing a new bug and attaching it there.
>
> https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
>
> >
> > While developing this set, I've added printk calls to the code executing the
> > sequences, there are 2 gpios involved nr 60 (backlight enable AFAICT, also used
> > by the BACKLIGHT sequences) and 72 (reset / panel_enable ?).
> > When efifb is up both are 1 / high.
> >
> > With the OLD naming, MIPI_SEQ_ASSERT_RESET does:
> >
> > gpio 72 high
> > delay
> > gpio 72 low
> > delay
> > gpio 72 high
>
> Hmm. OK so it just toggles the reset pin it seems.
>
> >
> > And DEASSERT does:
> >
> > gpio 72 low
> > gpio 60 low
>
> And this leaves the reset pin asserted, assuming it's active low,
> which your patch would seem to confirm.
>
> >
> > So with the old naming DEASSERT leaves the panel disabled / in reset and
> > the backlight disabled, which is exactly what we do not want...
>
> Right. Hmm. If we do flip them over like you suggest I think we'll at
> least need a big comment to inform people why we seem to go against the
> spec.
>
> I just filed a bug against the spec, but given past history I'm not
> expecting that to result in much of anything TBH.
Actually I did get a useful response. So yeah, looks like whoever wrote
the spec was standing on their head or something since the names are
opposite of how a normal person would make them.
I'll try transcode the diagram I've seen to text:
v2 sequence for video mode:
- power on
- wait t1+t2
- MIPIAssertResetPin
- clk/data lines to lp-11
- MIPISendInitialDcsCmds
- turn on DPI
- MIPIDisplayOn
- wait t5
- backlight on
...
- backlight off
- wait t6
- MIPIDisplayOff
- turn off DPI
- clk/data lines to lp-00
- MIPIDeassertResetPin
- wait t3
- power off
- wait t4
v3 sequence for video mode:
- MIPIPanelPowerOn
- MIPIAssertResetPin
- set clk/data lines to lp-11
- MIPISendInitialDcsCmds (LP)
- turn on DPI
- MIPITearOn (command mode only) + MIPIDisplayOn (LP and HS)
- MIPIBacklightOn
...
- MIPIBacklightOff
- turn off DPI
- MIPITearOff + MIPIDisplayOff (LP)
- clk/data lines to lp-00
- MIPIDeassertResetPin
- MIPIPanelPowerOff
If I'm reading that right all the delays are part of the
VBT seqeuences already, so no need to do them in the driver.
sequence for command mode:
- power on
- wait t1+t2
- MIPIAssertResetPin
- clk/data lines to lp-11
- MIPISendInitialDcsCmds
- MIPITearOn
- MIPIDisplayOn
- set pipe to dsr mode
- wait t5
- backlight on
... issue write_mem_start/write_mem_continue commands ...
- backlight off
- wait t6
- disable pipe dsr mode
- MIPITearOff
- MIPIDisplayOff
- clk/data lines to lp-00
- MIPIDeassertResetPin
- wait t3
- power off
- wait t4
Obviously there's a bit of other weirdness in those sequences as well
(eg. the v3 video mode sequence making references to operations done
only in command mode), and also the MIPIDisplayOff vs. DPI off ordering
is different between v2 and v3 sequences. And the cmd mode sequence
looks more like the v2 sequence, so not sure what's the story with v3
cmd mode really.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
