commit 848496e5902833600f7992f4faa82dc1546051ba
Author: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Date: Wed Jul 13 16:32:03 2016 +0300
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.
I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.
To fix this disable pre-emption to maximize the number of times we retry
the request. Also increase the timeout to 10ms to account for interrupts
that could reduce the number of these attempts. With this change I
couldn't trigger the problem.
v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
reply is generic. (Ville)
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 2 ++
drivers/gpu/drm/i915/intel_display.c | 31 ++++++++---------------
drivers/gpu/drm/i915/intel_pm.c | 49 ++++++++++++++++++++++++++++++++++++
3 files changed, 61 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 01f5067..1be5bab 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3593,6 +3593,8 @@ extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e,
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val);
int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox, u32 val);
+int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
+ u32 reply_mask, u32 reply);
/* intel_sideband.c */
u32 vlv_punit_read(struct drm_i915_private *dev_priv, u32 addr);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5d11002..3d220da 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6245,35 +6245,24 @@ skl_dpll0_disable(struct drm_i915_private *dev_priv)
dev_priv->cdclk_pll.vco = 0;
}
-static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
-{
- int ret;
- u32 val;
-
- /* inform PCU we want to change CDCLK */
- val = SKL_CDCLK_PREPARE_FOR_CHANGE;
- mutex_lock(&dev_priv->rps.hw_lock);
- ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
- mutex_unlock(&dev_priv->rps.hw_lock);
-
- return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
-}
-
-static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
-{
- return _wait_for(skl_cdclk_pcu_ready(dev_priv), 3000, 10) == 0;
-}
-
static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco)
{
u32 freq_select, pcu_ack;
+ int ret;
WARN_ON((cdclk == 24000) != (vco == 0));
DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz (VCO %d kHz)\n", cdclk, vco);
- if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
- DRM_ERROR("failed to inform PCU about cdclk change\n");
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ SKL_CDCLK_PREPARE_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ if (ret) {
+ DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
+ ret);
return;
}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 66c62f3..aed88e0 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -7864,6 +7864,55 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
return 0;
}
+static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32 mbox,
+ u32 request, u32 reply_mask, u32 reply,
+ u32 *status)
+{
+ u32 val = request;
+
+ *status = sandybridge_pcode_read(dev_priv, mbox, &val);
+
+ return *status || ((val & reply_mask) == reply);
+}
+
+/**
+ * skl_pcode_request - send PCODE request until acknowledgment
+ * @dev_priv: device private
+ * @mbox: PCODE mailbox ID the request is targeted for
+ * @request: request ID
+ * @reply_mask: mask used to check for request acknowledgment
+ * @reply: value used to check for request acknowledgement
+ *
+ * Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
+ * reports an error or a 10ms timeout expires. The request is acknowledged
+ * once the PCODE reply dword equals @reply after aplying @reply_mask.
+ *
+ * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
+ * other error as reported by PCODE.
+ */
+int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
+ u32 reply_mask, u32 reply)
+{
+ u32 status;
+ int ret;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+ /*
+ * The spec says to keep retrying the request for at most 3ms until
+ * acknowledgement, so disable pre-emption to maximize the number of
+ * attempts within this duration. Use a 10ms overall timeout to
+ * account for interrupts that could reduce the number of attempts.
+ */
+ preempt_disable();
+ ret = wait_for_atomic(skl_pcode_try_request(dev_priv, mbox, request,
+ reply_mask, reply, &status),
+ 10);
+ preempt_enable();
+
+ return ret ? ret : status;
+}
+
static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
/*
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
