Whilst 4.7.10 is fine, the current 4.8.10 kernel spews that message in dmesg during boot and later can't be undocked any longer - the vt7 display then will stay black forever. Switching to another vt works fine FWIW. Update: attached dmesg -- Toralf PGP: C4EACDDE 0076E94E
Linux version 4.8.10-hardened (root@t44) (gcc version 4.9.3 (Gentoo Hardened 4.9.3 p1.5, pie-0.6.4) ) #1 SMP Fri Nov 25 00:19:25 CET 2016 Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.10-hardened root=/dev/sda3 ro pax_size_overflow_report_only no_console_suspend x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. x86/fpu: Using 'eager' FPU context switches. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000af70afff] usable BIOS-e820: [mem 0x00000000af70b000-0x00000000bcc0efff] reserved BIOS-e820: [mem 0x00000000bcc0f000-0x00000000bce7efff] ACPI NVS BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data BIOS-e820: [mem 0x00000000bceff000-0x00000000bf9fffff] reserved BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000033e5fffff] usable NX (Execute Disable) protection: active SMBIOS 2.7 present. DMI: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET91WW (2.41 ) 09/21/2016 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x33e600 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 00C0000000 mask 7FC0000000 uncachable 1 base 00BE000000 mask 7FFE000000 uncachable 2 base 00BD000000 mask 7FFF000000 uncachable 3 base 00BCF00000 mask 7FFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled 8 disabled 9 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT e820: last_pfn = 0xaf70b max_arch_pfn = 0x400000000 found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] Scanning 1 areas for low memory corruption Base memory trampoline at [ffff880000097000] 97000 size 24576 Using GB pages for direct mapping BRK [0x0216c000, 0x0216cfff] PGTABLE ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) ACPI: XSDT 0x00000000BCEFE170 0000E4 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: FACP 0x00000000BCEF9000 00010C (v05 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: DSDT 0x00000000BCEE3000 010FAD (v01 LENOVO TP-GJ 00002410 INTL 20120711) ACPI: FACS 0x00000000BCD7A000 000040 ACPI: DBGP 0x00000000BCEFC000 000034 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: ECDT 0x00000000BCEFB000 000052 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: HPET 0x00000000BCEF8000 000038 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: APIC 0x00000000BCEF7000 000098 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: MCFG 0x00000000BCEF6000 00003C (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: SSDT 0x00000000BCEF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) ACPI: SSDT 0x00000000BCEF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) ACPI: SSDT 0x00000000BCEE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) ACPI: SSDT 0x00000000BCEE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) ACPI: SSDT 0x00000000BCEE0000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) ACPI: SSDT 0x00000000BCEDF000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711) ACPI: SSDT 0x00000000BCEDD000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711) ACPI: SSDT 0x00000000BCEDC000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711) ACPI: PCCT 0x00000000BCEDB000 00006E (v05 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: SSDT 0x00000000BCEDA000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711) ACPI: TCPA 0x00000000BCED9000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) ACPI: UEFI 0x00000000BCED8000 000042 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: MSDM 0x00000000BCCE2000 000055 (v03 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: ASF! 0x00000000BCEFD000 0000A5 (v32 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: BATB 0x00000000BCED7000 000046 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: FPDT 0x00000000BCED6000 000064 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: UEFI 0x00000000BCED5000 0002F6 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: DMAR 0x00000000BCED4000 0000B0 (v01 LENOVO TP-GJ 00002410 PTEC 00000002) ACPI: Local APIC address 0xfee00000 Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000033e5fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x00000000af70afff] node 0: [mem 0x0000000100000000-0x000000033e5fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000033e5fffff] On node 0 totalpages: 3071143 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3996 pages, LIFO batch:0 DMA32 zone: 11165 pages used for memmap DMA32 zone: 714507 pages, LIFO batch:31 Normal zone: 36760 pages used for memmap Normal zone: 2352640 pages, LIFO batch:31 Reserving Intel graphics memory at 0x00000000bda00000-0x00000000bf9fffff ACPI: PM-Timer IO Port: 0x1808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 smpboot: 8 Processors exceeds NR_CPUS limit of 4 smpboot: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: Registered nosave memory: [mem 0xaf70b000-0xbcc0efff] PM: Registered nosave memory: [mem 0xbcc0f000-0xbce7efff] PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff] PM: Registered nosave memory: [mem 0xbceff000-0xbf9fffff] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 30 pages/cpu @ffff88033e200000 s83416 r8192 d31272 u524288 pcpu-alloc: s83416 r8192 d31272 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3023133 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.10-hardened root=/dev/sda3 ro pax_size_overflow_report_only no_console_suspend PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Memory: 11982852K/12284572K available (6163K kernel code, 398K rwdata, 3048K rodata, 2680K init, 796K bss, 301720K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. NR_IRQS:4352 nr_irqs:728 16 Console: colour VGA+ 80x25 console [tty0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2494.308 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.61 BogoMIPS (lpj=2494308) pid_max: default: 32768 minimum: 501 ACPI: Core revision 20160422 ACPI: 10 ACPI AML tables successfully acquired and loaded Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) PAX: PCID detected PAX: INVPCID detected mce: CPU supports 7 MCE banks CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 Freeing SMP alternatives memory: 24K (ffffffff8209e000 - ffffffff820a4000) smpboot: APIC(0) Converting physical 0 to logical package 0 smpboot: Max logical packages: 4 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 TSC deadline timer enabled smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1) Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 0000ffffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f x86: Booting SMP configuration: .... node #0, CPUs: #1 PAX: PCID detected PAX: INVPCID detected #2 PAX: PCID detected PAX: INVPCID detected #3 PAX: PCID detected PAX: INVPCID detected x86: Booted up 1 node, 4 CPUs smpboot: Total of 4 processors activated (19974.17 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xbcc0f000-0xbce7efff] (2555904 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns xor: automatically using best checksumming function: avx : 25704.000 MB/sec NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on raid6: sse2x1 gen() 5824 MB/s raid6: sse2x1 xor() 4542 MB/s raid6: sse2x2 gen() 7304 MB/s raid6: sse2x2 xor() 5007 MB/s raid6: sse2x4 gen() 8531 MB/s raid6: sse2x4 xor() 6029 MB/s raid6: avx2x1 gen() 11406 MB/s raid6: avx2x2 gen() 13148 MB/s raid6: avx2x4 gen() 15433 MB/s raid6: using algorithm avx2x4 gen() 15433 MB/s raid6: using avx2x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI : EC: EC description table is found, configuring boot EC ACPI : EC: EC started ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88033DF2B000 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88033DF2B800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF88033DF92000 000119 (v01 PmRef ApCst 00003000 INTL 20120711) ACPI : EC: EC stopped ACPI : EC: EC started ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Power Resource [PUBS] (on) acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) ACPI: Power Resource [NVP3] (on) ACPI: Power Resource [NVP2] (on) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] pci_bus 0000:00: root bus resource [bus 00-3f] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.0: System wakeup disabled by ACPI pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063901f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff] pci 0000:00:19.0: reg 0x14: [mem 0xe063e000-0xe063efff] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: System wakeup disabled by ACPI pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: Enabling MPC IRBNCE pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: Enabling MPC IRBNCE pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled pci 0000:00:1c.1: System wakeup disabled by ACPI pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000 pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] pci_bus 0000:00: on NUMA node 0 ACPI: Enabled 4 GPEs in block 00 to 7F ACPI : EC: EC stopped ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 ACPI : EC: EC started vgaarb: setting as boot device: PCI:0000:00:02.0 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> PTP clock support registered EDAC MC: Ver: 3.0.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] e820: reserve RAM buffer [mem 0xaf70b000-0xafffffff] e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter clocksource: Switched to clocksource hpet pnp: PnP ACPI init system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved system 00:00: [mem 0x000dc000-0x000dffff] has been reserved system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] system 00:01: [io 0x1800-0x189f] has been reserved system 00:01: [io 0x0800-0x087f] has been reserved system 00:01: [io 0x0880-0x08ff] has been reserved system 00:01: [io 0x0900-0x097f] has been reserved system 00:01: [io 0x0980-0x09ff] has been reserved system 00:01: [io 0x0a00-0x0a7f] has been reserved system 00:01: [io 0x0a80-0x0aff] has been reserved system 00:01: [io 0x0b00-0x0b7f] has been reserved system 00:01: [io 0x0b80-0x0bff] has been reserved system 00:01: [io 0x15e0-0x15ef] has been reserved system 00:01: [io 0x1600-0x167f] has been reserved system 00:01: [io 0x1640-0x165f] has been reserved system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved system 00:01: [mem 0x00000000-0x00000fff] could not be reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active) pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) pnp: PnP ACPI: found 6 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff] pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff] NET: Registered protocol family 2 TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] PCI: CLS 64 bytes, default 64 DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da DMAR: RMRR base: 0x000000bc3c0000 end: 0x000000bc3d6fff DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff DMAR: No ATSR found DMAR: dmar0: Using Queued invalidation DMAR: dmar1: Using Queued invalidation DMAR: Setting RMRR: DMAR: Setting identity map for device 0000:00:02.0 [0xbd800000 - 0xbf9fffff] DMAR: Setting identity map for device 0000:00:14.0 [0xbc3c0000 - 0xbc3d6fff] DMAR: Setting identity map for device 0000:00:1d.0 [0xbc3c0000 - 0xbc3d6fff] DMAR: Prepare 0-16MiB unity mapping for LPC DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] DMAR: Intel(R) Virtualization Technology for Directed I/O iommu: Adding device 0000:00:00.0 to group 0 iommu: Adding device 0000:00:02.0 to group 1 iommu: Adding device 0000:00:03.0 to group 2 iommu: Adding device 0000:00:14.0 to group 3 iommu: Adding device 0000:00:16.0 to group 4 iommu: Adding device 0000:00:19.0 to group 5 iommu: Adding device 0000:00:1b.0 to group 6 iommu: Adding device 0000:00:1c.0 to group 7 iommu: Adding device 0000:00:1c.1 to group 8 iommu: Adding device 0000:00:1d.0 to group 9 iommu: Adding device 0000:00:1f.0 to group 10 iommu: Adding device 0000:00:1f.2 to group 10 iommu: Adding device 0000:00:1f.3 to group 10 iommu: Adding device 0000:02:00.0 to group 11 iommu: Adding device 0000:03:00.0 to group 12 RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules Scanning for low memory corruption every 60 seconds futex hash table entries: 1024 (order: 4, 65536 bytes) audit: initializing netlink subsys (disabled) audit: type=2000 audit(1480151401.503:1): initialized workingset: timestamp_bits=46 max_order=22 bucket_order=0 cryptomgr_test (41) used greatest stack depth: 14776 bytes left cryptomgr_test (45) used greatest stack depth: 14384 bytes left cryptomgr_test (48) used greatest stack depth: 14320 bytes left kworker/u8:0 (55) used greatest stack depth: 14208 bytes left kworker/u8:0 (56) used greatest stack depth: 13560 bytes left Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered (default) intel_idle: MWAIT substates: 0x11142120 intel_idle: v0.4.1 model 0x45 intel_idle: lapic_timer_reliable_states 0xffffffff loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst scsi host0: ahci scsi host1: ahci scsi host2: ahci ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 42 ata2: DUMMY ata3: DUMMY i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:02: alarms up to one month, y3k, 0 bytes nvram, hpet irqs intel_pstate: Intel P-state driver initializing Initializing XFRM netlink socket NET: Registered protocol family 10 Key type dns_resolver registered registered taskstats version 1 Btrfs loaded, crc32c=crc32c-generic Key type encrypted registered rtc_cmos 00:02: setting system clock to 2016-11-26 09:10:01 UTC (1480151401) ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded ata1.00: supports DRM functions and may not be fully accessible ata1.00: ATA-10: INTEL SSDSC2BF240A5L, LTVi, max UDMA/133 ata1.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded ata1.00: supports DRM functions and may not be fully accessible ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF24 LTVi PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk BTRFS: device fsid 3ac03d1d-c85f-4bf4-9c62-a0e05b23fa8d devid 1 transid 669455 /dev/root BTRFS info (device sda3): disk space caching is enabled BTRFS info (device sda3): detected SSD devices, enabling SSD mode VFS: Mounted root (btrfs filesystem) readonly on device 0:13. devtmpfs: mounted Freeing unused kernel memory: 2680K (ffffffff81e00000 - ffffffff8209e000) Write protecting the kernel read-only data: 12288k random: fast init done setfont (122) used greatest stack depth: 12184 bytes left init-early.sh (121) used greatest stack depth: 11184 bytes left tsc: Refined TSC clocksource calibration: 2494.226 MHz clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847 ns input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (51 C) ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) Linux agpgart interface v0.103 snd_hda_intel: probe of 0000:00:03.0 failed with error -2 ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 xhci_hcd 0000:00:14.0: cache line size of 64 is not supported usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 4.8.10-hardened xhci-hcd usb usb1: SerialNumber: 0000:00:14.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 9 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 4.8.10-hardened xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [drm] Initialized drm 1.1.0 20060810 ACPI: AC Adapter [AC] (on-line) e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode Non-volatile memory driver v1.3 thinkpad_acpi: ThinkPad ACPI Extras v0.25 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS GJET91WW (2.41 ), EC unknown thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQCTO1WW thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... ACPI: Battery Slot [BAT0] (battery present) snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_generic hdaudioC0D0: inputs: snd_hda_codec_generic hdaudioC0D0: Mic=0x1a snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 wmi: Mapper loaded ACPI: Battery Slot [BAT1] (battery present) thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46 input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input3 Intel(R) Wireless WiFi driver for Linux Copyright(c) 2003- 2015 Intel Corporation iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2 iwlwifi 0000:03:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 input: PC Speaker as /devices/platform/pcspkr/input/input8 Error: Driver 'pcspkr' is already registered, aborting... tpm tpm0: TPM is disabled/deactivated (0x6) AVX2 version of gcm_enc/dec engaged. AES CTR mode by8 optimization enabled e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:0e:15:45 e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF ehci-pci 0000:00:1d.0: EHCI Host Controller ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 ehci-pci 0000:00:1d.0: debug port 2 e1000e 0000:00:19.0 enp0s25: renamed from eth0 ehci-pci 0000:00:1d.0: cache line size of 64 is not supported ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 4.8.10-hardened ehci_hcd usb usb3: SerialNumber: 0000:00:1d.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [drm] DMAR active, disabling use of stolen memory [drm] Memory usable by graphics device = 2048M [drm] VT-d active for gfx access [drm] Replacing VGA console driver Console: switching to colour dummy device 80x25 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:ffffffffa0454792] *ERROR* failed to update link training ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 usb 1-3: new high-speed USB device number 2 using xhci_hcd ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0 [drm:ffffffffa0454792] *ERROR* failed to update link training usb 3-1: new high-speed USB device number 2 using ehci-pci usb 1-3: New USB device found, idVendor=17ef, idProduct=1010 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3: Product: Lenovo ThinkPad Dock usb 1-3: Manufacturer: LENOVO hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected clocksource: Switched to clocksource tsc usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd usb 3-1: New USB device found, idVendor=8087, idProduct=8000 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-1:1.0: USB hub found hub 3-1:1.0: 8 ports detected usb 2-3: New USB device found, idVendor=17ef, idProduct=1010 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-3: Product: Lenovo ThinkPad Dock usb 2-3: Manufacturer: LENOVO hub 2-3:1.0: USB hub found hub 2-3:1.0: 4 ports detected fbcon: inteldrmfb (fb0) is primary device usb 1-6: new full-speed USB device number 3 using xhci_hcd psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..] usb 3-1.5: new full-speed USB device number 3 using ehci-pci psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x12e800/0x0, board id: 2962, fw id: 2560 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 usb 1-6: New USB device found, idVendor=138a, idProduct=0017 usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 usb 1-6: SerialNumber: c614264754da input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 usb 3-1.5: New USB device found, idVendor=058f, idProduct=9540 usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.5: Product: EMV Smartcard Reader usb 3-1.5: Manufacturer: Generic usb 1-3.1: new high-speed USB device number 4 using xhci_hcd usb 1-3.1: New USB device found, idVendor=0ccd, idProduct=00ab usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.1: Product: Cinergy T XXS usb 1-3.1: Manufacturer: TerraTec GmbH usb 1-3.1: SerialNumber: 0000000001 usb 1-7: new full-speed USB device number 5 using xhci_hcd usb 1-7: New USB device found, idVendor=8087, idProduct=07dc usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-3.4: new high-speed USB device number 6 using xhci_hcd psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 usb 1-3.4: New USB device found, idVendor=17ef, idProduct=100f usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.4: Product: Lenovo ThinkPad Dock usb 1-3.4: Manufacturer: Lenovo usb 1-3.4: SerialNumber: Rev1.2 hub 1-3.4:1.0: USB hub found hub 1-3.4:1.0: 3 ports detected DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [00:02.0] fault addr 73ff000000 [fault reason 05] PTE Write access is not set usb 1-8: new high-speed USB device number 7 using xhci_hcd input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 usb 1-8: New USB device found, idVendor=04f2, idProduct=b39a usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-8: Product: Integrated Camera usb 1-8: Manufacturer: SunplusIT INC. usb 1-3.4.3: new full-speed USB device number 8 using xhci_hcd Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a) dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input12 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) usb 1-3.4.3: New USB device found, idVendor=046d, idProduct=c52b usb 1-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.4.3: Product: USB Receiver usb 1-3.4.3: Manufacturer: Logitech dib0700: firmware started successfully. usb 1-3.4.2: new low-speed USB device number 9 using xhci_hcd usb 1-3.4.2: New USB device found, idVendor=046a, idProduct=0023 usb 1-3.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/0003:046D:C52B.0001/input/input13 input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.0/0003:046A:0023.0004/input/input14 hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.4.3/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.1/0003:046D:C52B.0002/input/input15 cherry 0003:046A:0023.0004: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:14.0-3.4.2/input0 input: HID 046a:0023 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.1/0003:046A:0023.0005/input/input16 hid-generic 0003:046D:C52B.0002: input,hiddev0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.4.3/input1 hid-generic 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4.3/input2 cherry 0003:046A:0023.0005: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:14.0-3.4.2/input1 dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3) Console: switching to colour frame buffer device 240x67 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device usb 1-3.1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... DiB0070: successfully identified Registered IR keymap rc-dib0700-rc5 input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/rc/rc0/input17 rc rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/rc/rc0 dvb-usb: schedule remote query interval to 50 msecs. dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 grsec: time set by /sbin/hwclock[hwclock:857] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:856] uid/euid:0/0 gid/egid:0/0 grsec: time set by /sbin/hwclock[hwclock:857] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:856] uid/euid:0/0 gid/egid:0/0 grsec: time set by /sbin/hwclock[hwclock:862] uid/euid:0/0 gid/egid:0/0, parent /lib64/rc/sh/openrc-run.sh[openrc-run.sh:861] uid/euid:0/0 gid/egid:0/0 BTRFS info (device sda3): use lzo compression BTRFS info (device sda3): use spread ssd allocation scheme BTRFS info (device sda3): disk space caching is enabled Adding 16777212k swap on /dev/sda2. Priority:-1 extents:1 across:16777212k SSFS DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [00:02.0] fault addr 73ff000000 [fault reason 05] PTE Write access is not set DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [00:02.0] fault addr 73ff000000 [fault reason 05] PTE Write access is not set wpa_supplicant (1722) used greatest stack depth: 10352 bytes left tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. br0: port 1(tap0) entered blocking state br0: port 1(tap0) entered disabled state device tap0 entered promiscuous mode device br0 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready NET: Registered protocol family 17 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. random: crng init done Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period (net ffffffff81c4f980) ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (65536 buckets, 262144 max) ip6_tables: (C) 2000-2006 Netfilter Core Team wlp3s0: authenticate with 08:96:d7:05:f9:2a wlp3s0: send auth to 08:96:d7:05:f9:2a (try 1/3) wlp3s0: authenticated wlp3s0: associate with 08:96:d7:05:f9:2a (try 1/3) wlp3s0: RX AssocResp from 08:96:d7:05:f9:2a (capab=0x431 status=0 aid=2) wlp3s0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
