Em Sex, 2016-11-18 às 16:34 +0200, Ville Syrjälä escreveu:
> On Fri, Nov 18, 2016 at 12:25:30PM -0200, Paulo Zanoni wrote:
> >
> > Em Ter, 2016-11-08 às 16:47 +0200, ville.syrjala@xxxxxxxxxxxxxxx
> > escreveu:
> > >
> > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >
> > > Now we've rename the local plane id variable as 'plane_id'
> > > everywhere
> > > except the pre-SKL primary plane code. Let's do the rename there
> > > as
> > > well
> > > so that we'll free up the name 'plane' for use with struct
> > > intel_plane*.
> >
> > As you pointed, my second email do patch 7 was supposed to be a
> > reply
> > to this patch. So let's move the discussion to the appropriate
> > thread.
> > And I'll try to better write my argumentation here.
> >
> > I think this series does a really nice job of consistently using
> > the
> > term "plane_id" to refer to the plane Z ordering that we have in
> > the
> > newer platforms, while keeping "plane" as the variable that refers
> > to
> > the HW plane (A/B/C) the struct represents. And, IMHO, this patch
> > goes
> > against that trend, since it starts using plane_id to talk about
> > A/B/C.
> >
> > I see your goal is to leave the "plane" namespace restricted to
> > variables that point to our plane structs, but I think that if
> > we're
> > going to do this, we should probably use something different than
> > plane_id when talking about the hw a/b/c planes. So maybe using a
> > different variable name here would solve the problem.
> >
> > What do you think?
>
> Perhaps. But it's hard coming up with a name that pleases the eye
> sufficiently.
But then, if there's no better name, isn't just "plane" better than
"plane_id" here since it allows us to keep the "plane" namespace for
the legacy A/B/C assignment, while plane_id stays for the newer things?
>
> >
> >
> > >
> > >
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/intel_display.c | 57 +++++++++++++++++-----
> > > ----
> > > ----------
> > > 1 file changed, 27 insertions(+), 30 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > > b/drivers/gpu/drm/i915/intel_display.c
> > > index 95644c8cc568..bd084b085421 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -3014,10 +3014,9 @@ static void
> > > i9xx_update_primary_plane(struct
> > > drm_plane *primary,
> > > struct drm_i915_private *dev_priv = to_i915(dev);
> > > struct intel_crtc *intel_crtc =
> > > to_intel_crtc(crtc_state-
> > > >
> > > > base.crtc);
> > > struct drm_framebuffer *fb = plane_state->base.fb;
> > > - int plane = intel_crtc->plane;
> > > + enum plane plane_id = to_intel_plane(primary)->plane;
> > > u32 linear_offset;
> > > u32 dspcntr;
> > > - i915_reg_t reg = DSPCNTR(plane);
> > > unsigned int rotation = plane_state->base.rotation;
> > > int x = plane_state->base.src.x1 >> 16;
> > > int y = plane_state->base.src.y1 >> 16;
> > > @@ -3033,16 +3032,16 @@ static void
> > > i9xx_update_primary_plane(struct
> > > drm_plane *primary,
> > > /* pipesrc and dspsize control the size that is
> > > scaled from,
> > > * which should always be the user's requested
> > > size.
> > > */
> > > - I915_WRITE(DSPSIZE(plane),
> > > + I915_WRITE(DSPSIZE(plane_id),
> > > ((crtc_state->pipe_src_h - 1) << 16)
> > > |
> > > (crtc_state->pipe_src_w - 1));
> > > - I915_WRITE(DSPPOS(plane), 0);
> > > - } else if (IS_CHERRYVIEW(dev_priv) && plane == PLANE_B)
> > > {
> > > - I915_WRITE(PRIMSIZE(plane),
> > > + I915_WRITE(DSPPOS(plane_id), 0);
> > > + } else if (IS_CHERRYVIEW(dev_priv) && plane_id ==
> > > PLANE_B) {
> > > + I915_WRITE(PRIMSIZE(plane_id),
> > > ((crtc_state->pipe_src_h - 1) << 16)
> > > |
> > > (crtc_state->pipe_src_w - 1));
> > > - I915_WRITE(PRIMPOS(plane), 0);
> > > - I915_WRITE(PRIMCNSTALPHA(plane), 0);
> > > + I915_WRITE(PRIMPOS(plane_id), 0);
> > > + I915_WRITE(PRIMCNSTALPHA(plane_id), 0);
> > > }
> > >
> > > switch (fb->pixel_format) {
> > > @@ -3099,21 +3098,21 @@ static void
> > > i9xx_update_primary_plane(struct
> > > drm_plane *primary,
> > > intel_crtc->adjusted_x = x;
> > > intel_crtc->adjusted_y = y;
> > >
> > > - I915_WRITE(reg, dspcntr);
> > > + I915_WRITE(DSPCNTR(plane_id), dspcntr);
> > >
> > > - I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
> > > + I915_WRITE(DSPSTRIDE(plane_id), fb->pitches[0]);
> > > if (INTEL_INFO(dev)->gen >= 4) {
> > > - I915_WRITE(DSPSURF(plane),
> > > + I915_WRITE(DSPSURF(plane_id),
> > > intel_fb_gtt_offset(fb, rotation) +
> > > intel_crtc->dspaddr_offset);
> > > - I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
> > > - I915_WRITE(DSPLINOFF(plane), linear_offset);
> > > + I915_WRITE(DSPTILEOFF(plane_id), (y << 16) | x);
> > > + I915_WRITE(DSPLINOFF(plane_id), linear_offset);
> > > } else {
> > > - I915_WRITE(DSPADDR(plane),
> > > + I915_WRITE(DSPADDR(plane_id),
> > > intel_fb_gtt_offset(fb, rotation) +
> > > intel_crtc->dspaddr_offset);
> > > }
> > > - POSTING_READ(reg);
> > > + POSTING_READ(DSPCNTR(plane_id));
> > > }
> > >
> > > static void i9xx_disable_primary_plane(struct drm_plane
> > > *primary,
> > > @@ -3121,15 +3120,14 @@ static void
> > > i9xx_disable_primary_plane(struct
> > > drm_plane *primary,
> > > {
> > > struct drm_device *dev = crtc->dev;
> > > struct drm_i915_private *dev_priv = to_i915(dev);
> > > - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > > - int plane = intel_crtc->plane;
> > > + enum plane plane_id = to_intel_plane(primary)->plane;
> > >
> > > - I915_WRITE(DSPCNTR(plane), 0);
> > > + I915_WRITE(DSPCNTR(plane_id), 0);
> > > if (INTEL_INFO(dev_priv)->gen >= 4)
> > > - I915_WRITE(DSPSURF(plane), 0);
> > > + I915_WRITE(DSPSURF(plane_id), 0);
> > > else
> > > - I915_WRITE(DSPADDR(plane), 0);
> > > - POSTING_READ(DSPCNTR(plane));
> > > + I915_WRITE(DSPADDR(plane_id), 0);
> > > + POSTING_READ(DSPCNTR(plane_id));
> > > }
> > >
> > > static void ironlake_update_primary_plane(struct drm_plane
> > > *primary,
> > > @@ -3140,10 +3138,9 @@ static void
> > > ironlake_update_primary_plane(struct drm_plane *primary,
> > > struct drm_i915_private *dev_priv = to_i915(dev);
> > > struct intel_crtc *intel_crtc =
> > > to_intel_crtc(crtc_state-
> > > >
> > > > base.crtc);
> > > struct drm_framebuffer *fb = plane_state->base.fb;
> > > - int plane = intel_crtc->plane;
> > > + enum plane plane_id = to_intel_plane(primary)->plane;
> > > u32 linear_offset;
> > > u32 dspcntr;
> > > - i915_reg_t reg = DSPCNTR(plane);
> > > unsigned int rotation = plane_state->base.rotation;
> > > int x = plane_state->base.src.x1 >> 16;
> > > int y = plane_state->base.src.y1 >> 16;
> > > @@ -3202,19 +3199,19 @@ static void
> > > ironlake_update_primary_plane(struct drm_plane *primary,
> > > intel_crtc->adjusted_x = x;
> > > intel_crtc->adjusted_y = y;
> > >
> > > - I915_WRITE(reg, dspcntr);
> > > + I915_WRITE(DSPCNTR(plane_id), dspcntr);
> > >
> > > - I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
> > > - I915_WRITE(DSPSURF(plane),
> > > + I915_WRITE(DSPSTRIDE(plane_id), fb->pitches[0]);
> > > + I915_WRITE(DSPSURF(plane_id),
> > > intel_fb_gtt_offset(fb, rotation) +
> > > intel_crtc->dspaddr_offset);
> > > if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
> > > - I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
> > > + I915_WRITE(DSPOFFSET(plane_id), (y << 16) | x);
> > > } else {
> > > - I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
> > > - I915_WRITE(DSPLINOFF(plane), linear_offset);
> > > + I915_WRITE(DSPTILEOFF(plane_id), (y << 16) | x);
> > > + I915_WRITE(DSPLINOFF(plane_id), linear_offset);
> > > }
> > > - POSTING_READ(reg);
> > > + POSTING_READ(DSPCNTR(plane_id));
> > > }
> > >
> > > u32 intel_fb_stride_alignment(const struct drm_i915_private
> > > *dev_priv,
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
