Re: ✗ Fi.CI.BAT: warning for drm/i915: Add a per-pipe plane identifier enum (rev4)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 09, 2016 at 04:24:58PM -0000, Patchwork wrote:
> == Series Details ==
> 
> Series: drm/i915: Add a per-pipe plane identifier enum (rev4)
> URL   : https://patchwork.freedesktop.org/series/14978/
> State : warning
> 
> == Summary ==
> 
> Series 14978v4 drm/i915: Add a per-pipe plane identifier enum
> https://patchwork.freedesktop.org/api/1.0/series/14978/revisions/4/mbox/
> 
> Test drv_module_reload_basic:
>                 pass       -> DMESG-WARN (fi-skl-6770hq)

[   26.882144] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)
[   26.882800] [drm:drm_dp_dual_mode_detect] DP dual mode adaptor ID: 44 (err 0)
[   26.882823] [drm:lspcon_init [i915]] No LSPCON detected, found type 1 HDMI
[   26.882862] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[   26.882884] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B

The bug seems to contain multiple lspcon issues potentially, so not sure
if we're tracking it all there or what:
https://bugs.freedesktop.org/show_bug.cgi?id=98353

> Test kms_force_connector_basic:
>         Subgroup force-connector-state:
>                 pass       -> SKIP       (fi-ivb-3520m)
>         Subgroup force-edid:
>                 pass       -> SKIP       (fi-ivb-3520m)
>         Subgroup force-load-detect:
>                 pass       -> SKIP       (fi-ivb-3520m)
>         Subgroup prune-stale-modes:
>                 pass       -> SKIP       (fi-ivb-3520m)

[  325.952021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1]
[  325.952051] [drm:intel_crt_detect [i915]] [CONNECTOR:50:VGA-1] force=1
[  325.952087] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x40f40000, result 0
[  325.952112] [drm:intel_crt_detect [i915]] CRT not detected via hotplug
[  325.952392] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  325.952421] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
[  325.953097] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  325.953104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  325.953132] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  325.953159] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
[  325.954322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  325.954351] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
[  325.954378] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
[  325.954383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] disconnected
[  325.954746] [drm:status_store] [CONNECTOR:50:VGA-1] force updated from 0 to 2 or reprobing
[  325.954752] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1]
[  325.954758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] status updated from disconnected to connected
[  325.955068] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  325.955098] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
[  325.955334] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  325.955341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  325.955368] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  325.955394] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
[  325.956456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  325.956484] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
[  325.956563] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] probed modes :
[  325.956584] [drm:drm_mode_debug_printmodeline] Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  325.956594] [drm:drm_mode_debug_printmodeline] Modeline 72:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  325.956601] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[  325.956613] [drm:drm_mode_debug_printmodeline] Modeline 73:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[  325.956620] [drm:drm_mode_debug_printmodeline] Modeline 70:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
...
[  339.524802] [drm:status_store] [CONNECTOR:50:VGA-1] force updated from 2 to 0 or reprobing
[  339.524808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1]
[  339.524845] [drm:intel_crt_detect [i915]] [CONNECTOR:50:VGA-1] force=1
[  339.524880] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x43f40000, result 1
[  339.524904] [drm:intel_crt_detect [i915]] CRT detected via hotplug
[  339.525639] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  339.525681] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
[  339.525941] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  339.526246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  339.526288] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  339.526330] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
[  339.527481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  339.527512] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
[  339.527562] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:VGA-1] probed modes :
[  339.527568] [drm:drm_mode_debug_printmodeline] Modeline 74:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  339.527572] [drm:drm_mode_debug_printmodeline] Modeline 72:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  339.527576] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[  339.527581] [drm:drm_mode_debug_printmodeline] Modeline 73:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[  339.527585] [drm:drm_mode_debug_printmodeline] Modeline 70:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[  339.552201] [drm:drm_fb_helper_hotplug_event] 

So something a bit fishy going on with the CRT HPD on that machine.

> 
> fi-bdw-5557u     total:244  pass:229  dwarn:0   dfail:0   fail:0   skip:15 
> fi-bsw-n3050     total:244  pass:204  dwarn:0   dfail:0   fail:0   skip:40 
> fi-bxt-t5700     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
> fi-byt-j1900     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
> fi-byt-n2820     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
> fi-hsw-4770      total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
> fi-hsw-4770r     total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
> fi-ilk-650       total:244  pass:191  dwarn:0   dfail:0   fail:0   skip:53 
> fi-ivb-3520m     total:244  pass:218  dwarn:0   dfail:0   fail:0   skip:26 
> fi-ivb-3770      total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
> fi-kbl-7200u     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
> fi-skl-6260u     total:244  pass:230  dwarn:0   dfail:0   fail:0   skip:14 
> fi-skl-6700hq    total:244  pass:223  dwarn:0   dfail:0   fail:0   skip:21 
> fi-skl-6700k     total:244  pass:222  dwarn:1   dfail:0   fail:0   skip:21 
> fi-skl-6770hq    total:244  pass:229  dwarn:1   dfail:0   fail:0   skip:14 
> fi-snb-2520m     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
> fi-snb-2600      total:244  pass:211  dwarn:0   dfail:0   fail:0   skip:33 
> 
> 74d13d4fab710f664d5eeb15fd3de821a7f46818 drm-intel-nightly: 2016y-11m-09d-15h-02m-46s UTC integration manifest
> e7fdae4 drm/i915: Don't populate plane->plane for cursors and sprites
> 776f170 drm/i915: Rename the local 'plane' variable to 'plane_id' in primary plane code
> 8a691eb drm/i915: Use enum plane_id in VLV/CHV wm code
> daca75f drm/i915: Use enum plane_id in VLV/CHV sprite code
> 2fc5a0b drm/i915: Use enum plane_id in SKL plane code
> 698ce5d drm/i915: Use enum plane_id in SKL wm code
> e6a137a drm/i915: Add crtc->plane_ids_mask
> e37903b drm/i915: Add per-pipe plane identifier
> caadefb drm/i915: Remove some duplicated plane swapping logic
> 
> == Logs ==
> 
> For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2943/

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux