On Fri, Nov 11, 2016 at 10:21:39PM +0100, Daniel Vetter wrote:
> On Mon, Nov 07, 2016 at 04:27:30PM -0800, Dhinakaran Pandiyan wrote:
> > Hotplugging a monitor in DP MST configuration triggers short pulses.
> > Although the short pulse handling path ends up in the MST hotplug function,
> > we do not perform a detect before sending the hotplug uvent. This leads to
> > the connector status not being updated when the userspace calls
> > DRM_IOCTL_MODE_GETCONNECTOR.
> >
> > So, let's call the connector function ->detect() to update the connector
> > status before sending the uevent.
> >
> > v2: Update connector status inside mode_config mutex (Ville)
> >
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
>
> quick comments from me on irc:
>
> <danvet> dhnkrn, really tricky I think
> <danvet> dhnkrn, also feels wrong from an entire design pov
> <danvet> I'd expect the topology manager could tell us from which exact downstream port the short pulse came
> <danvet> which means we should be able to get at that connector without taking the global lock
> <danvet> i.e. at least avoid the for_each_connector
> <danvet> on the detect itself, I need to think
> <danvet> but we might need to essentially postpone the ->detect work to the hotplug worker
> <danvet> except that it's not a direct hpd from our chip
> <danvet> but a downstream one
> <danvet> this is going to be fun
> <dhnkrn> Hmm .. Does updating the connector status need the lock or is it the detect() ?
> <danvet> yup
> <danvet> and we might need to do additional dpcd transactions (e.g. for load detect probing on downstream ports)
> <danvet> or at least edid reads
> <danvet> both recurse back into dp mst helper code like ville said
> <danvet> dhnkrn, so instead of doing the detect work from the hotplug code
> <danvet> put them on some list
> <danvet> need to be careful in case they are already there
> <danvet> list only protected with dedicated lock
> <danvet> then launch the hpd worker
> <danvet> and walk that list from there, with the mode_config.mutex to do the full-on probe
> <danvet> we can't call ->detect from dig_port_work, and walking the entire connector list in there is also not a good idea imo
> <danvet> dhnkrn, but that's just my preliminary analysis from like 10 minutes of thinking and checking what ville raised
> <danvet> needs more thought probably
> <danvet> dhnkrn, to clarify your question: both connector->status and calling ->detect need mode_config.mutex
> <danvet> that mutex is what protects output probe state<Vtec234> ccr: i might have udev configured incorrectly then
>
> Cheers, Daniel
> > ---
> > drivers/gpu/drm/i915/intel_dp_mst.c | 22 +++++++++++++++++++++-
> > 1 file changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> > index 3ffbd69..8e36a96 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > @@ -492,8 +492,28 @@ static void intel_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
> > struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr);
> > struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > struct drm_device *dev = intel_dig_port->base.base.dev;
> > + struct intel_connector *intel_connector;
> > + bool changed = false;
> > + enum drm_connector_status old_status;
> > + struct drm_mode_config *mode_config = &dev->mode_config;
> > +
> > + mutex_lock(&mode_config->mutex);
> > + for_each_intel_connector(dev, intel_connector) {
> > + struct drm_connector *connector = &(intel_connector->base);
> > +
> > + if (intel_connector->mst_port != intel_dp)
> > + continue;
> > +
> > + old_status = connector->status;
> > + connector->status = connector->funcs->detect(connector, false);
> > +
> > + if (old_status != connector->status)
> > + changed = true;
> > + }
> > + mutex_unlock(&mode_config->mutex);
> >
> > - drm_kms_helper_hotplug_event(dev);
I just realized that this call here will call down into the fbdev helper,
which already does the above ->detect calls. At least if there's no
compositor running. So I wonder why the deadlock ville pointed out isn't
blowing up already ...
-Daniel
> > + if (changed)
> > + drm_kms_helper_hotplug_event(dev);
> > }
> >
> > static const struct drm_dp_mst_topology_cbs mst_cbs = {
> > --
> > 2.7.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
