We store DP link rates as link clock frequencies in kHz, just like all
other clock values. But, DP link rates in the DP Spec are expressed in
Gbps/lane, which seems to have led to some confusion.
E.g., for HBR2
Max. data rate = 5.4 Gbps/lane x 4 lane x 8/10 x 1/8 = 2160000 kBps
where, 8/10 is for channel encoding and 1/8 is for bit to Byte conversion
Using link clock frequency, like we do
Max. data rate = 540000 kHz * 4 lanes = 2160000 kSymbols/s
Because, each symbol has 8 bit of data, this is 2160000 kBps
and there is no need to account for channel encoding here.
But, currently we do 540000 kHz * 4 lanes * (8/10) = 1728000 kBps
Similarly, while computing the required link bandwidth for a mode,
there is a mysterious 1/10 term.
This should simply be pixel_clock kHz * bpp * 1/8 to give the final
result in kBps
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 28 +++++++++-------------------
1 file changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8f313c1..7a9e122 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -161,33 +161,23 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
return min(source_max, sink_max);
}
-/*
- * The units on the numbers in the next two are... bizarre. Examples will
- * make it clearer; this one parallels an example in the eDP spec.
- *
- * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
- *
- * 270000 * 1 * 8 / 10 == 216000
- *
- * The actual data capacity of that configuration is 2.16Gbit/s, so the
- * units are decakilobits. ->clock in a drm_display_mode is in kilohertz -
- * or equivalently, kilopixels per second - so for 1680x1050R it'd be
- * 119000. At 18bpp that's 2142000 kilobits per second.
- *
- * Thus the strange-looking division by 10 in intel_dp_link_required, to
- * get the result in decakilobits instead of kilobits.
- */
-
static int
intel_dp_link_required(int pixel_clock, int bpp)
{
- return (pixel_clock * bpp + 9) / 10;
+ /* pixel_clock is in kHz, divide bpp by 8 to return the value in kBps*/
+ return (pixel_clock * bpp + 7) / 8;
}
static int
intel_dp_max_data_rate(int max_link_clock, int max_lanes)
{
- return (max_link_clock * max_lanes * 8) / 10;
+ /* max_link_clock is the link symbol clock (LS_Clk) in kHz and not the
+ * link rate that is generally expressed in Gbps. Since, 8 bits data is
+ * transmitted every LS_Clk per lane, there is no need to account for
+ * the channel encoding that is done in the PHY layer here.
+ */
+
+ return (max_link_clock * max_lanes);
}
static int
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
