On 7 November 2016 at 19:49, Robert Bragg <robert@xxxxxxxxxxxxx> wrote:
> The maximum OA sampling frequency is now configurable via a
> dev.i915.oa_max_sample_rate sysctl parameter.
>
> Following the precedent set by perf's similar
> kernel.perf_event_max_sample_rate the default maximum rate is 100000Hz
>
> Signed-off-by: Robert Bragg <robert@xxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_perf.c | 61 ++++++++++++++++++++++++++++++++--------
> 1 file changed, 50 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
> index e51c1d8..1a87fe9 100644
> --- a/drivers/gpu/drm/i915/i915_perf.c
> +++ b/drivers/gpu/drm/i915/i915_perf.c
> @@ -82,6 +82,21 @@ static u32 i915_perf_stream_paranoid = true;
> #define INVALID_CTX_ID 0xffffffff
>
>
> +/* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate
> + *
> + * 160ns is the smallest sampling period we can theoretically program the OA
> + * unit with on Haswell, corresponding to 6.25MHz.
> + */
> +static int oa_sample_rate_hard_limit = 6250000;
> +
> +/* Theoretically we can program the OA unit to sample every 160ns but don't
> + * allow that by default unless root...
> + *
> + * The default threshold of 100000Hz is based on perf's similar
> + * kernel.perf_event_max_sample_rate sysctl parameter.
> + */
> +static u32 i915_oa_max_sample_rate = 100000;
> +
> /* XXX: beware if future OA HW adds new report formats that the current
> * code assumes all reports have a power-of-two size and ~(size - 1) can
> * be used as a mask to align the OA tail pointer.
> @@ -1314,6 +1329,7 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
> }
>
> for (i = 0; i < n_props; i++) {
> + u64 oa_period, oa_freq_hz;
> u64 id, value;
> int ret;
>
> @@ -1359,21 +1375,35 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
> return -EINVAL;
> }
>
> - /* NB: The exponent represents a period as follows:
> - *
> - * 80ns * 2^(period_exponent + 1)
> - *
> - * Theoretically we can program the OA unit to sample
> + /* Theoretically we can program the OA unit to sample
> * every 160ns but don't allow that by default unless
> * root.
> *
> - * Referring to perf's
> - * kernel.perf_event_max_sample_rate for a precedent
> - * (100000 by default); with an OA exponent of 6 we get
> - * a period of 10.240 microseconds -just under 100000Hz
> + * On Haswell the period is derived from the exponent
> + * as:
> + *
> + * period = 80ns * 2^(exponent + 1)
> + */
> + BUILD_BUG_ON(sizeof(oa_period) != 8);
> + oa_period = 80ull * (2ull << value);
> +
> + /* This check is primarily to ensure that oa_period <=
> + * UINT32_MAX (before passing to do_div which only
> + * accepts a u32 denominator), but we can also skip
> + * checking anything < 1Hz which implicitly can't be
> + * limited via an integer oa_max_sample_rate.
> */
> - if (value < 6 && !capable(CAP_SYS_ADMIN)) {
> - DRM_ERROR("Minimum OA sampling exponent is 6 without root privileges\n");
> + if (oa_period <= NSEC_PER_SEC) {
> + u64 tmp = NSEC_PER_SEC;
> + do_div(tmp, oa_period);
> + oa_freq_hz = tmp;
> + } else
> + oa_freq_hz = 0;
> +
> + if (oa_freq_hz > i915_oa_max_sample_rate &&
> + !capable(CAP_SYS_ADMIN)) {
> + DRM_ERROR("OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without root privileges\n",
This line is getting a little too long.
Reviewed-by: Matthew Auld <matthew.auld@xxxxxxxxx>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
