Hardware engineers confirmed that writing to it has no effect, as implied by
the FIXME comment.
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dpio_phy.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
index 4a6164a..e95b291 100644
--- a/drivers/gpu/drm/i915/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -365,22 +365,6 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
I915_WRITE(BXT_PORT_CL2CM_DW6(phy), val);
}
- val = I915_READ(BXT_PORT_CL1CM_DW30(phy));
- val &= ~OCL2_LDOFUSE_PWR_DIS;
- /*
- * On PHY1 disable power on the second channel, since no port is
- * connected there. On PHY0 both channels have a port, so leave it
- * enabled.
- * TODO: port C is only connected on BXT-P, so on BXT0/1 we should
- * power down the second channel on PHY0 as well.
- *
- * FIXME: Clarify programming of the following, the register is
- * read-only with bit 6 fixed at 0 at least in stepping A.
- */
- if (!phy_info->dual_channel)
- val |= OCL2_LDOFUSE_PWR_DIS;
- I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val);
-
if (phy_info->rcomp_phy != -1) {
uint32_t grc_code;
/*
--
2.5.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
