Re: [PATCH v4 1/2] drm/i915/dp: Enable DP audio stall fix for gen9 platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2016-10-26 at 18:14 +0000, Pandiyan, Dhinakaran wrote:
> On Wed, 2016-10-26 at 12:11 +0300, Ville Syrjälä wrote:
> > On Tue, Oct 25, 2016 at 07:37:36PM -0700, Dhinakaran Pandiyan wrote:
> > > Enabling DP audio stall fix is necessary to play audio over DP HBR2. So,
> > > let's set this bit right before enabling the audio codec. Playing audio
> > > without setting this bit results in pipe FIFO underruns.
> > > 
> > > This workaround is applicable only for audio sample rates up to 96kHz. For
> > > frequencies above 96kHz, this is insufficient and cdclk should be increased
> > > to at least 432 MHz, just like BDW. Since, the audio driver does not
> > > support sample rates > 48 kHz, we are safe with this fix for now.
> > > 
> > > v2: Inlined the code change within hsw_audio_codec_enable() (Jani)
> > >     Fixed the port clock typo
> > >     Added TODO comment
> > > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/i915/i915_reg.h    |  5 +++++
> > >  drivers/gpu/drm/i915/intel_audio.c | 30 +++++++++++++++++++++++++++++-
> > >  2 files changed, 34 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index 00efaa1..76dac48 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -6236,6 +6236,11 @@ enum {
> > >  #define SLICE_ECO_CHICKEN0			_MMIO(0x7308)
> > >  #define   PIXEL_MASK_CAMMING_DISABLE		(1 << 14)
> > >  
> > > +#define _CHICKEN_TRANS_A	0x420C0
> > > +#define _CHICKEN_TRANS_B	0x420C4
> > > +#define CHICKEN_TRANS(tran) _MMIO_TRANS(tran, _CHICKEN_TRANS_A, _CHICKEN_TRANS_B)
> > > +#define SPARE_13	(1<<13)
> > > +
> > >  /* WaCatErrorRejectionIssue */
> > >  #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		_MMIO(0x9030)
> > >  #define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)
> > > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> > > index 7093cfb..894f11e 100644
> > > --- a/drivers/gpu/drm/i915/intel_audio.c
> > > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > > @@ -283,6 +283,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
> > >  {
> > >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > >  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > > +	struct intel_crtc_state *crtc_config =  intel_crtc->config;
> > > +	enum transcoder cpu_transcoder = crtc_config->cpu_transcoder;
> > >  	enum pipe pipe = intel_crtc->pipe;
> > >  	uint32_t tmp;
> > >  
> > > @@ -290,13 +292,21 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
> > >  
> > >  	mutex_lock(&dev_priv->av_mutex);
> > >  
> > > +	/*Disable DP audio stall fix for HBR2*/
> > > +	if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config) &&
> > > +	    crtc_config->port_clock >= 540000) {
> > > +		tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> > > +		tmp &= ~SPARE_13;
> > > +		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> > > +	}
> > > +
> > >  	/* Disable timestamps */
> > >  	tmp = I915_READ(HSW_AUD_CFG(pipe));
> > >  	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> > >  	tmp |= AUD_CONFIG_N_PROG_ENABLE;
> > >  	tmp &= ~AUD_CONFIG_UPPER_N_MASK;
> > >  	tmp &= ~AUD_CONFIG_LOWER_N_MASK;
> > > -	if (intel_crtc_has_dp_encoder(intel_crtc->config))
> > > +	if (intel_crtc_has_dp_encoder(crtc_config))
> > >  		tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > >  	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > >  
> > > @@ -315,6 +325,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> > >  {
> > >  	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> > >  	struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
> > > +	struct intel_crtc_state *crtc_config =  intel_crtc->config;
> > > +	enum transcoder cpu_transcoder = crtc_config->cpu_transcoder;
> > >  	enum pipe pipe = intel_crtc->pipe;
> > >  	enum port port = intel_encoder->port;
> > >  	const uint8_t *eld = connector->eld;
> > > @@ -326,6 +338,22 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> > >  
> > >  	mutex_lock(&dev_priv->av_mutex);
> > >  
> > > +	/* Enable DP audio stall fix for HBR2
> > > +	 *
> > > +	 * TODO: This workaround is applicable only for audio sample rates up
> > > +	 * to 96kHz. For frequencies above 96kHz, this is insufficient and
> > > +	 * cdclk should be increased to at least 432 MHz, just like BDW. Since,
> > > +	 * the audio driver does not support sample rates > 48 kHz, we are safe
> > > +	 * with this fix for now.
> > 
> > Where in the sound driver is this supposed 96kHz limit? I see a lot of
> > stuff for >96kHz in the code at least.
> > 
> 
> Libin/Jeeja can you help me here?
> 
> 

I see another problem, we cannot change cdclk without a full modeset. So
choosing the workarounds based on audio sampling rate is going to be
tricky. I guess, it makes sense to use the BDW cdclk workaround to SKL
too.


-DK


> > > +	 */
> > > +
> > > +	if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config) &&
> > > +	    crtc_config->port_clock >= 540000) {
> > > +		tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> > > +		tmp |= SPARE_13;
> > > +		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> > > +	}
> > > +
> > >  	/* Enable audio presence detect, invalidate ELD */
> > >  	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> > >  	tmp |= AUDIO_OUTPUT_ENABLE(pipe);
> > > -- 
> > > 2.7.4
> > 
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux