On Tue, 2016-10-25 at 14:46 +0000, Patchwork wrote: > == Series Details == > > Series: drm/i915/lspcon: Work around resume failure (rev2) > URL : https://patchwork.freedesktop.org/series/14280/ > State : warning > > == Summary == > > Series 14280v2 drm/i915/lspcon: Work around resume failure > https://patchwork.freedesktop.org/api/1.0/series/14280/revisions/2/mb > ox/ > > Test drv_module_reload_basic: > dmesg-warn -> PASS (fi-skl-6770hq) > pass -> DMESG-WARN (fi-skl-6700hq) This is due to the bug's persistence over warm reboot. Since I pushed this w/a there's been two DRM_CI runs without these errors on this machine (whereas before either this or one of the S3 tests always failed). > Test gem_exec_suspend: > Subgroup basic-s3: > dmesg-warn -> PASS (fi-skl-6770hq) > dmesg-warn -> PASS (fi-skl-6700hq) > Test kms_flip: > Subgroup basic-flip-vs-wf_vblank: > pass -> SKIP (fi-byt-n2820) > Test kms_frontbuffer_tracking: > Subgroup basic: > fail -> PASS (fi-skl-6770hq) > Test kms_pipe_crc_basic: > Subgroup suspend-read-crc-pipe-a: > dmesg-warn -> PASS (fi-skl-6700hq) > Subgroup suspend-read-crc-pipe-b: > pass -> DMESG-WARN (fi-skl-6770hq) *ERROR* failed to inform PCU about cdclk change https://bugs.freedesktop.org/show_bug.cgi?id=97929 Thanks for the review, I pushed the patchset to -dinq. > dmesg-warn -> PASS (fi-skl-6700hq) > Subgroup suspend-read-crc-pipe-c: > dmesg-warn -> PASS (fi-skl-6700hq) > > fi-bdw- > 5557u total:246 pass:231 dwarn:0 dfail:0 fail:0 skip:15 > fi-bsw- > n3050 total:246 pass:204 dwarn:0 dfail:0 fail:0 skip:42 > fi-bxt- > t5700 total:246 pass:216 dwarn:0 dfail:0 fail:0 skip:30 > fi-byt- > j1900 total:246 pass:215 dwarn:0 dfail:0 fail:0 skip:31 > fi-byt- > n2820 total:246 pass:210 dwarn:0 dfail:0 fail:0 skip:36 > fi-hsw- > 4770 total:246 pass:224 dwarn:0 dfail:0 fail:0 skip:22 > fi-hsw- > 4770r total:246 pass:223 dwarn:0 dfail:0 fail:0 skip:23 > fi-ilk- > 650 total:246 pass:185 dwarn:0 dfail:0 fail:0 skip:61 > fi-ivb- > 3520m total:246 pass:220 dwarn:0 dfail:0 fail:0 skip:26 > fi-ivb- > 3770 total:246 pass:220 dwarn:0 dfail:0 fail:0 skip:26 > fi-kbl- > 7200u total:246 pass:222 dwarn:0 dfail:0 fail:0 skip:24 > fi-skl- > 6260u total:246 pass:232 dwarn:0 dfail:0 fail:0 skip:14 > fi-skl- > 6700hq total:246 pass:222 dwarn:1 dfail:0 fail:0 skip:23 > fi-skl- > 6700k total:246 pass:222 dwarn:1 dfail:0 fail:0 skip:23 > fi-skl- > 6770hq total:246 pass:231 dwarn:1 dfail:0 fail:0 skip:14 > fi-snb- > 2520m total:246 pass:209 dwarn:0 dfail:0 fail:0 skip:37 > fi-snb- > 2600 total:246 pass:208 dwarn:0 dfail:0 fail:0 skip:38 > > 3ce99d02d8f2b7d1414d20d5972f8e277b33693e drm-intel-nightly: 2016y- > 10m-25d-13h-55m-46s UTC integration manifest > ab50b11 drm/i915/lspcon: Add workaround for resuming in PCON mode > 607efb9 drm/i915/lspcon: Get DDC adapter via container_of() instead > of cached ptr > e281e36 drm/i915/dp: Read DP descriptor for eDP and LSPCON too > 742a374 drm/i915/lspcon: Fail LSPCON probe if the start of DPCD can't > be read > e3a2cc0 drm/i915/dp: Print full branch/sink descriptor > d6131ca drm/i915/dp: Print only sink or branch specific OUI based on > dev type > 3c3c2a2 drm/i915/dp: Remove debug dependency of DPCD SW/HW revision > read > > Full results at https://intel-gfx-ci.01.org/CI/Patchwork_2810/ > > == Logs == > > For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2810/ _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
