On Mon, 2016-10-24 at 21:58 +0300, Jani Nikula wrote: > On Mon, 24 Oct 2016, Imre Deak <imre.deak@xxxxxxxxx> wrote: > > On ma, 2016-10-24 at 17:16 +0000, Patchwork wrote: > > > == Series Details == > > > > > > Series: drm/i915/lspcon: Work around resume failure > > > URL : https://patchwork.freedesktop.org/series/14280/ > > > State : warning > > > > > > == Summary == > > > > > > Series 14280v1 drm/i915/lspcon: Work around resume failure > > > https://patchwork.freedesktop.org/api/1.0/series/14280/revisions/1/mb > > > ox/ > > > > > > Test drv_module_reload_basic: > > > pass -> DMESG-WARN (fi-skl-6700hq) > > > > This one is a result of the previous CI run where LSPCON failed after > > S3. After a warm-reboot LSPCON is still in a broken state, and even the > > initial LSPCON probe will fail. > > > > A power cycle between CI runs would prevent the above. > > Err, what. So patch 8/8 doesn't fix that problem? What fixes that > then?!? It does fix the problem, which happens after S3. The above fail is due to the previous CI run which left LSPCON in a broken state after an S3 test. A subsequent warm-reset on that machine won't recover LSPCON and the load time LSPCON probe will fail. I couldn't reproduce this problem with the workaround applied. --Imre > > BR, > Jani > > > > > > Test gem_exec_suspend: > > > Subgroup basic-s3: > > > dmesg-warn -> PASS (fi-skl-6700hq) > > > Test kms_pipe_crc_basic: > > > Subgroup suspend-read-crc-pipe-a: > > > dmesg-warn -> PASS (fi-skl-6700hq) > > > Subgroup suspend-read-crc-pipe-b: > > > dmesg-warn -> PASS (fi-skl-6700hq) > > > Subgroup suspend-read-crc-pipe-c: > > > dmesg-warn -> PASS (fi-skl-6700hq) > > > > > > fi-bdw- > > > 5557u total:246 pass:231 dwarn:0 dfail:0 fail:0 skip:15 > > > fi-bsw- > > > n3050 total:246 pass:204 dwarn:0 dfail:0 fail:0 skip:42 > > > fi-bxt- > > > t5700 total:246 pass:216 dwarn:0 dfail:0 fail:0 skip:30 > > > fi-byt- > > > j1900 total:246 pass:215 dwarn:0 dfail:0 fail:0 skip:31 > > > fi-byt- > > > n2820 total:246 pass:211 dwarn:0 dfail:0 fail:0 skip:35 > > > fi-hsw- > > > 4770 total:246 pass:224 dwarn:0 dfail:0 fail:0 skip:22 > > > fi-hsw- > > > 4770r total:246 pass:224 dwarn:0 dfail:0 fail:0 skip:22 > > > fi-ilk- > > > 650 total:246 pass:185 dwarn:0 dfail:0 fail:1 skip:60 > > > fi-ivb- > > > 3520m total:246 pass:221 dwarn:0 dfail:0 fail:0 skip:25 > > > fi-ivb- > > > 3770 total:246 pass:221 dwarn:0 dfail:0 fail:0 skip:25 > > > fi-skl- > > > 6260u total:246 pass:232 dwarn:0 dfail:0 fail:0 skip:14 > > > fi-skl- > > > 6700hq total:246 pass:222 dwarn:1 dfail:0 fail:0 skip:23 > > > fi-skl- > > > 6700k total:246 pass:222 dwarn:1 dfail:0 fail:0 skip:23 > > > fi-skl- > > > 6770hq total:246 pass:232 dwarn:0 dfail:0 fail:0 skip:14 > > > fi-snb- > > > 2520m total:246 pass:210 dwarn:0 dfail:0 fail:0 skip:36 > > > fi-snb- > > > 2600 total:246 pass:209 dwarn:0 dfail:0 fail:0 skip:37 > > > > > > Results at /Patchwork_2801/ > > > > > > 102441087e47f4892b88c4f6e308e3edf89eeda1 drm-intel-nightly: 2016y- > > > 10m-24d-14h-28m-17s UTC integration manifest > > > eaa672c drm/i915/lspcon: Add workaround for resuming in PCON mode > > > eb04604 drm/i915/lspcon: Get DDC adapter via container_of() instead > > > of cached ptr > > > 0ca993d drm/i915/dp: Read DP descriptor for eDP and LSPCON too > > > 0144d102 drm/i915/lspcon: Fail LSPCON probe if the start of DPCD > > > can't be read > > > 7568e07 drm/i915/dp: Print full branch/sink descriptor > > > 3b4f6e9 drm/i915/dp: Print only sink or branch specific OUI based on > > > dev type > > > b1439bc drm/i915/dp: Remove debug dependency of DPCD SW/HW revision > > > read > > > 2beca1a drm/dp: Factor out helper to distinguish between branch and > > > sink devices > > > > > _______________________________________________ > > Intel-gfx mailing list > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
