Re: [PATCH v2 3/6] drm: RIP mode_config->rotation_property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 21, 2016 at 10:22:45PM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> Now that all drivers have been converted over to the per-plane rotation
> property, we can just nuke the global rotation property.
> 
> v2: Rebase due to BIT(),__builtin_ffs() & co.
>     Deal with superfluous code shuffling
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>

Merged up to this patch. I think it's better to land the follow-up i915
patches through drm-intel. I'll do backmerges next week anyway, you won't
need to wait long.

Thanks, Daniel
> ---
>  drivers/gpu/drm/drm_atomic.c    |  6 ++----
>  drivers/gpu/drm/drm_blend.c     | 32 ++++----------------------------
>  drivers/gpu/drm/drm_fb_helper.c |  7 +------
>  include/drm/drm_blend.h         |  2 --
>  include/drm/drm_crtc.h          |  5 -----
>  5 files changed, 7 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index f81706387889..1b5a32df9a9a 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -705,8 +705,7 @@ int drm_atomic_plane_set_property(struct drm_plane *plane,
>  		state->src_w = val;
>  	} else if (property == config->prop_src_h) {
>  		state->src_h = val;
> -	} else if (property == config->rotation_property ||
> -		   property == plane->rotation_property) {
> +	} else if (property == plane->rotation_property) {
>  		if (!is_power_of_2(val & DRM_ROTATE_MASK))
>  			return -EINVAL;
>  		state->rotation = val;
> @@ -766,8 +765,7 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
>  		*val = state->src_w;
>  	} else if (property == config->prop_src_h) {
>  		*val = state->src_h;
> -	} else if (property == config->rotation_property ||
> -		   property == plane->rotation_property) {
> +	} else if (property == plane->rotation_property) {
>  		*val = state->rotation;
>  	} else if (property == plane->zpos_property) {
>  		*val = state->zpos;
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index e52aece30900..1f2412c7ccfd 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -89,7 +89,7 @@
>   * On top of this basic transformation additional properties can be exposed by
>   * the driver:
>   *
> - * - Rotation is set up with drm_mode_create_rotation_property(). It adds a
> + * - Rotation is set up with drm_plane_create_rotation_property(). It adds a
>   *   rotation and reflection step between the source and destination rectangles.
>   *   Without this property the rectangle is only scaled, but not rotated or
>   *   reflected.
> @@ -105,18 +105,12 @@
>   */
>  
>  /**
> - * drm_mode_create_rotation_property - create a new rotation property
> - * @dev: DRM device
> + * drm_plane_create_rotation_property - create a new rotation property
> + * @plane: drm plane
> + * @rotation: initial value of the rotation property
>   * @supported_rotations: bitmask of supported rotations and reflections
>   *
>   * This creates a new property with the selected support for transformations.
> - * The resulting property should be stored in @rotation_property in
> - * &drm_mode_config. It then must be attached to each plane which supports
> - * rotations using drm_object_attach_property().
> - *
> - * FIXME: Probably better if the rotation property is created on each plane,
> - * like the zpos property. Otherwise it's not possible to allow different
> - * rotation modes on different planes.
>   *
>   * Since a rotation by 180° degress is the same as reflecting both along the x
>   * and the y axis the rotation property is somewhat redundant. Drivers can use
> @@ -144,24 +138,6 @@
>   * rotation. After reflection, the rotation is applied to the image sampled from
>   * the source rectangle, before scaling it to fit the destination rectangle.
>   */
> -struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
> -						       unsigned int supported_rotations)
> -{
> -	static const struct drm_prop_enum_list props[] = {
> -		{ __builtin_ffs(DRM_ROTATE_0) - 1,   "rotate-0" },
> -		{ __builtin_ffs(DRM_ROTATE_90) - 1,  "rotate-90" },
> -		{ __builtin_ffs(DRM_ROTATE_180) - 1, "rotate-180" },
> -		{ __builtin_ffs(DRM_ROTATE_270) - 1, "rotate-270" },
> -		{ __builtin_ffs(DRM_REFLECT_X) - 1,  "reflect-x" },
> -		{ __builtin_ffs(DRM_REFLECT_Y) - 1,  "reflect-y" },
> -	};
> -
> -	return drm_property_create_bitmask(dev, 0, "rotation",
> -					   props, ARRAY_SIZE(props),
> -					   supported_rotations);
> -}
> -EXPORT_SYMBOL(drm_mode_create_rotation_property);
> -
>  int drm_plane_create_rotation_property(struct drm_plane *plane,
>  				       unsigned int rotation,
>  				       unsigned int supported_rotations)
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index e0d428f9d1cb..83dbae0fabcf 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -392,15 +392,10 @@ static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
>  		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
>  			drm_plane_force_disable(plane);
>  
> -		if (plane->rotation_property) {
> +		if (plane->rotation_property)
>  			drm_mode_plane_set_obj_prop(plane,
>  						    plane->rotation_property,
>  						    DRM_ROTATE_0);
> -		} else if (dev->mode_config.rotation_property) {
> -			drm_mode_plane_set_obj_prop(plane,
> -						    dev->mode_config.rotation_property,
> -						    DRM_ROTATE_0);
> -		}
>  	}
>  
>  	for (i = 0; i < fb_helper->crtc_count; i++) {
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index fd351924e1c5..13221cf9b3eb 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -52,8 +52,6 @@ static inline bool drm_rotation_90_or_270(unsigned int rotation)
>  	return rotation & (DRM_ROTATE_90 | DRM_ROTATE_270);
>  }
>  
> -struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
> -						       unsigned int supported_rotations);
>  int drm_plane_create_rotation_property(struct drm_plane *plane,
>  				       unsigned int rotation,
>  				       unsigned int supported_rotations);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 284c1b3aec10..bc860cfc67ca 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1156,11 +1156,6 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *plane_type_property;
>  	/**
> -	 * @rotation_property: Optional property for planes or CRTCs to specifiy
> -	 * rotation.
> -	 */
> -	struct drm_property *rotation_property;
> -	/**
>  	 * @prop_src_x: Default atomic plane property for the plane source
>  	 * position in the connected &drm_framebuffer.
>  	 */
> -- 
> 2.7.4
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux