Re: [i-g-t PATCH v2] igt/tools: Update intel_watermark with SKL support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Cc'ing reviewers


On Tue, 2016-10-18 at 17:05 -0700, Dhinakaran Pandiyan wrote:
> Added support to print SKL watermark and DDB registers.
> 
> v2: Printed raw register data, renamed planes and combined two printf()'s
> (Ville)
> 
> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> ---
>  tools/intel_watermark.c | 150 +++++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 149 insertions(+), 1 deletion(-)
> 
> diff --git a/tools/intel_watermark.c b/tools/intel_watermark.c
> index e9a2b05..81e394c 100644
> --- a/tools/intel_watermark.c
> +++ b/tools/intel_watermark.c
> @@ -120,6 +120,11 @@ static const char *endis(bool enabled)
>  	return enabled ? "enabled" : "disabled";
>  }
>  
> +static const char endis_ast(bool enabled)
> +{
> +	return enabled ? '*' : ' ';
> +}
> +
>  static int is_gen7_plus(uint32_t d)
>  {
>  	return !(IS_GEN5(d) || IS_GEN6(d));
> @@ -130,6 +135,147 @@ static int is_hsw_plus(uint32_t d)
>  	return !(IS_GEN5(d) || IS_GEN6(d) || IS_IVYBRIDGE(d));
>  }
>  
> +
> +static void skl_wm_dump(void)
> +{
> +	int pipe, plane, level;
> +	int num_pipes = 3;
> +	int num_planes = 5;
> +	int num_levels = 8;
> +	uint32_t base_addr = 0x70000, addr, wm_offset;
> +	uint32_t wm[num_levels][num_pipes][num_planes];
> +	uint32_t wm_trans[num_pipes][num_planes];
> +	uint32_t buf_cfg[num_pipes][num_planes];
> +	char reg_name[20];
> +
> +	intel_register_access_init(intel_get_pci_device(), 0);
> +
> +	for (pipe = 0; pipe < num_pipes; pipe++) {
> +		for (plane = 0; plane < num_planes; plane++) {
> +			addr =  base_addr +  pipe * 0x1000 + plane * 0x100;
> +
> +			wm_trans[pipe][plane] = read_reg(addr + 0x00168);
> +			buf_cfg[pipe][plane] = read_reg(addr + 0x0017C);
> +			for (level = 0; level < num_levels; level++) {
> +				wm_offset = addr + 0x00140 + level * 0x4;
> +				wm[level][pipe][plane] = read_reg(wm_offset);
> +			}
> +		}
> +	}
> +
> +	for (plane = 0; plane < num_planes; plane++) {
> +		for (level = 0; level < num_levels; level++) {
> +			for (pipe = 0; pipe < num_pipes; pipe++) {
> +				if (plane == 0)
> +					snprintf(reg_name, sizeof(reg_name), "%s_WM_%c_%1d","CUR",
> +						 pipe_name(pipe), level);
> +				else
> +					snprintf(reg_name, sizeof(reg_name), "%s_WM_%1d_%c_%1d","PLANE",
> +						 plane, pipe_name(pipe), level);
> +
> +				printf("%-19s %8x\t\t" , reg_name, wm[level][pipe][plane]);
> +			}
> +			printf("\n");
> +		}
> +		printf("\n");
> +	}
> +
> +	for (plane = 0; plane < num_planes; plane++) {
> +			for (pipe = 0; pipe < num_pipes; pipe++) {
> +				if (plane == 0)
> +					snprintf(reg_name, sizeof(reg_name), "%s_WM_TRANS_%c", "CUR",
> +						 pipe_name(pipe));
> +				else
> +					snprintf(reg_name, sizeof(reg_name), "%s_WM_TRANS_%1d_%c", "PLANE",
> +						 plane, pipe_name(pipe));
> +
> +				printf("%-19s %8x\t\t", reg_name, wm_trans[pipe][plane]);
> +
> +		}
> +		printf("\n");
> +	}
> +	printf("\n");
> +
> +	for (plane = 0; plane < num_planes; plane++) {
> +			for (pipe = 0; pipe < num_pipes; pipe++) {
> +				if (plane == 0)
> +					snprintf(reg_name, sizeof(reg_name), "%s_BUF_CFG_%c", "CUR",
> +					 pipe_name(pipe));
> +				else
> +					snprintf(reg_name, sizeof(reg_name), "%s_BUF_CFG_%1d_%c", "PLANE",
> +					 plane, pipe_name(pipe));
> +
> +				printf("%-19s %8x\t\t", reg_name, buf_cfg[pipe][plane]);
> +		}
> +		printf("\n");
> +	}
> +	printf("\n");
> +
> +	for (pipe = 0; pipe < num_pipes; pipe++) {
> +		uint32_t start, end, size;
> +		uint32_t lines, blocks, enable;
> +
> +		printf("PIPE_%c\n", pipe_name(pipe));
> +		printf("LEVEL   CURSOR   PLANE_1   PLANE_2   PLANE_3   PLANE_4\n");
> +		for (level = 0; level < num_levels; level++) {
> +			printf("%5d  ", level);
> +			for (plane = 0; plane < num_planes; plane++) {
> +				blocks = REG_DECODE1(wm[level][pipe][plane], 0, 9);
> +				lines = REG_DECODE1(wm[level][pipe][plane], 14, 5);
> +				enable = REG_DECODE1(wm[level][pipe][plane], 31, 1);
> +
> +				printf("%3d%c", blocks, endis_ast(enable));
> +				if (!REG_DECODE1(wm[level][pipe][plane], 30, 1))
> +					printf("(%2d)  ", lines);
> +				else
> +					printf("(--)  ");
> +			}
> +			printf("\n");
> +		}
> +
> +		printf("TRANS: ");
> +		for (plane = 0; plane < num_planes; plane++) {
> +			blocks = REG_DECODE1(wm_trans[pipe][plane], 0, 9);
> +			lines = REG_DECODE1(wm_trans[pipe][plane], 14, 5);
> +			enable = REG_DECODE1(wm_trans[pipe][plane], 31, 1);
> +
> +			printf("%3d%c", blocks, endis_ast(enable));
> +			if (!REG_DECODE1(wm_trans[pipe][plane], 30, 1))
> +				printf("(%2d)  ", lines);
> +			else
> +				printf("(--)  ");
> +		}
> +
> +		printf("\nDDB allocation:");
> +
> +		printf("\nstart ");
> +		for (plane = 0; plane < num_planes; plane++) {
> +			start = REG_DECODE1(buf_cfg[pipe][plane], 0, 10);
> +			printf("%7d   ", start);
> +		}
> +
> +		printf("\nend   ");
> +		for (plane = 0; plane < num_planes; plane++) {
> +			end = REG_DECODE1(buf_cfg[pipe][plane], 16, 10);
> +			printf("%7d   ", end);
> +		}
> +
> +		printf("\nsize  ");
> +		for (plane = 0; plane < num_planes; plane++) {
> +			start = REG_DECODE1(buf_cfg[pipe][plane], 0, 10);
> +			end =  REG_DECODE1(buf_cfg[pipe][plane], 16, 10);
> +			size = end - start + 1;
> +			printf("%7d   ", (end == 0 && size == 1) ? 0 : size);
> +		}
> +
> +		printf("\n\n\n");
> +	}
> +
> +	printf("* plane watermark enabled\n");
> +	printf("(x) line watermark if enabled\n");
> +
> +}
> +
>  static void ilk_wm_dump(void)
>  {
>  	int i;
> @@ -900,7 +1046,9 @@ int main(int argc, char *argv[])
>  {
>  	devid = intel_get_pci_device()->device_id;
>  
> -	if (IS_VALLEYVIEW(devid) || IS_CHERRYVIEW(devid)) {
> +	if (IS_GEN9(devid)) {
> +		skl_wm_dump();
> +	} else if (IS_VALLEYVIEW(devid) || IS_CHERRYVIEW(devid)) {
>  		display_base = 0x180000;
>  		vlv_wm_dump();
>  	} else if (HAS_PCH_SPLIT(devid)) {

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux