This is a testcase with multiple planes. The idea here is the following
- draw a uniform frame with blue color
- grab crc for reference
- put planes randomly on top with the same blue color
- punch holes with black color into the primary framebuffer
- ideally the planes should cover these holes so that the output is the
identical to reference crc
- composite all with one ioctl call
- grab crc and verify that the reference crc is equal
- repeat this for dozen iterations to maximize coverage
v3: Cleanup by removing separate plane array
For atomic, pass DRM_MODE_PAGE_FLIP_EVENT
Grab crc by using igt_pipe_crc_get_crc instead of igt_pipe_crc_collect_crc
Rename nplanes variable to max_planes
To optimize test execution, run iterations after the modeset
v2: Keep a logfile on random number seeds per subtest that are not skipped
due to unmet test requirements
Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
---
tests/Makefile.sources | 1 +
tests/kms_plane_multiple.c | 423 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 424 insertions(+)
create mode 100644 tests/kms_plane_multiple.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 6d081c3..ffd59c1 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -105,6 +105,7 @@ TESTS_progs_M = \
kms_pipe_color \
kms_pipe_crc_basic \
kms_plane \
+ kms_plane_multiple \
kms_properties \
kms_psr_sink_crc \
kms_render \
diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
new file mode 100644
index 0000000..0cb7552
--- /dev/null
+++ b/tests/kms_plane_multiple.c
@@ -0,0 +1,423 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "igt.h"
+#include "drmtest.h"
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+
+IGT_TEST_DESCRIPTION("Test atomic mode setting with multiple planes ");
+
+#define SIZE 128
+
+typedef struct {
+ float red;
+ float green;
+ float blue;
+} color_t;
+
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ igt_pipe_crc_t *pipe_crc;
+ igt_plane_t *plane[IGT_MAX_PLANES];
+ struct igt_fb fb[IGT_MAX_PLANES];
+} data_t;
+
+typedef struct {
+ data_t *data;
+ igt_crc_t reference_crc;
+} test_position_t;
+
+/* Command line parameters. */
+struct {
+ bool user_seed;
+ int seed;
+ bool user_logfile;
+ char logfile[SIZE];
+} opt = {
+ .user_seed = false,
+ .seed = 1,
+ .user_logfile = false,
+ .logfile = "kms_plane_multiple.log",
+};
+
+
+static int logwrite(const char *testname)
+{
+ time_t curr_time;
+ FILE *fid;
+ char *time_str;
+
+ fid = fopen(opt.logfile, "a");
+
+ if (fid == NULL) {
+ igt_debug("Could not open file %s\n", opt.logfile);
+ return -1;
+ }
+
+ curr_time = time(NULL);
+
+ time_str = ctime(&curr_time);
+ time_str[strlen(time_str)-1] = '\0';
+
+ fprintf(fid, "%s: kms_plane_multiple --run-subtest %s --seed %d\n",
+ time_str, testname, opt.seed);
+
+ fclose(fid);
+
+ return 0;
+}
+
+/*
+ * Common code across all tests, acting on data_t
+ */
+static void test_init(data_t *data, enum pipe pipe)
+{
+ data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+}
+
+static void test_fini(data_t *data, igt_output_t *output, int max_planes)
+{
+ igt_plane_set_fb(data->plane[IGT_PLANE_PRIMARY], NULL);
+
+ for (int i = IGT_PLANE_2; i <= max_planes; i++)
+ igt_plane_set_fb(data->plane[i], NULL);
+
+ /* reset the constraint on the pipe */
+ igt_output_set_pipe(output, PIPE_ANY);
+
+ igt_pipe_crc_free(data->pipe_crc);
+}
+
+static bool test_is_atomic(const char *testname)
+{
+ if (strncmp(testname, "atomic", 6) == 0)
+ return true;
+
+ return false;
+}
+
+static void
+test_grab_crc(data_t *data, igt_output_t *output, enum pipe pipe,
+ color_t *color, uint64_t tiling, igt_crc_t *crc /* out */)
+{
+ struct igt_fb fb;
+ drmModeModeInfo *mode;
+ igt_plane_t *primary;
+ int n;
+ bool test_atomic = test_is_atomic(igt_subtest_name());
+
+ igt_output_set_pipe(output, pipe);
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+
+ mode = igt_output_get_mode(output);
+
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ color->red, color->green, color->blue,
+ &fb);
+
+ igt_plane_set_fb(primary, &fb);
+
+ igt_display_commit2(&data->display,
+ test_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+ igt_pipe_crc_start(data->pipe_crc);
+ n = igt_pipe_crc_get_crcs(data->pipe_crc, 1, &crc);
+ igt_assert_eq(n, 1);
+ igt_pipe_crc_stop(data->pipe_crc);
+
+ igt_plane_set_fb(primary, NULL);
+
+ igt_display_commit2(&data->display,
+ test_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+ igt_remove_fb(data->drm_fd, &fb);
+}
+
+/*
+ * Multiple plane position test.
+ * - We start by grabbing a reference CRC of a full blue fb being scanned
+ * out on the primary plane
+ * - Then we scannout number of planes:
+ * * the primary plane uses a blue fb with a black rectangle hole
+ * * planes, on top of the primary plane, with a blue fb that is set-up
+ * to cover the black rectangles of the primary plane fb
+ * The resulting CRC should be identical to the reference CRC
+ */
+
+static void
+create_fb_for_mode_position(data_t *data, drmModeModeInfo *mode,
+ color_t *color, int *rect_x, int *rect_y,
+ int rect_w, int rect_h, uint64_t tiling,
+ int max_planes)
+{
+ unsigned int fb_id;
+ cairo_t *cr;
+
+ fb_id = igt_create_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ tiling,
+ &data->fb[IGT_PLANE_PRIMARY]);
+ igt_assert(fb_id);
+
+ cr = igt_get_cairo_ctx(data->drm_fd, &data->fb[IGT_PLANE_PRIMARY]);
+ igt_paint_color(cr, rect_x[0], rect_y[0],
+ mode->hdisplay, mode->vdisplay,
+ color->red, color->green, color->blue);
+
+ for (int i = IGT_PLANE_2; i <= max_planes; i++)
+ igt_paint_color(cr, rect_x[i], rect_y[i],
+ rect_w, rect_h, 0.0, 0.0, 0.0);
+
+ igt_assert(cairo_status(cr) == 0);
+ cairo_destroy(cr);
+}
+
+
+static void
+test_planes(data_t *data, enum pipe pipe, color_t *color,
+ uint64_t tiling, int max_planes, igt_output_t *output)
+{
+ drmModeModeInfo *mode;
+ int x[IGT_MAX_PLANES];
+ int y[IGT_MAX_PLANES];
+ int i;
+
+ igt_output_set_pipe(output, pipe);
+
+ mode = igt_output_get_mode(output);
+
+ /* sprite planes with random positions */
+ x[IGT_PLANE_PRIMARY] = 0;
+ y[IGT_PLANE_PRIMARY] = 0;
+ for (i = IGT_PLANE_2; i <= max_planes; i++) {
+ x[i] = rand() % (mode->hdisplay - SIZE);
+ y[i] = rand() % (mode->vdisplay - SIZE);
+
+ data->plane[i] = igt_output_get_plane(output, i);
+
+ igt_create_color_fb(data->drm_fd,
+ SIZE, SIZE, /* width, height */
+ data->plane[i]->is_cursor ? DRM_FORMAT_ARGB8888 : DRM_FORMAT_XRGB8888,
+ tiling,
+ color->red, color->green, color->blue,
+ &data->fb[i]);
+
+ igt_plane_set_position(data->plane[i], x[i], y[i]);
+ igt_plane_set_fb(data->plane[i], &data->fb[i]);
+ }
+
+ /* primary plane */
+ data->plane[IGT_PLANE_PRIMARY] = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ create_fb_for_mode_position(data, mode, color, x, y,
+ SIZE, SIZE, tiling, max_planes);
+ igt_plane_set_fb(data->plane[IGT_PLANE_PRIMARY], &data->fb[IGT_PLANE_PRIMARY]);
+}
+
+static void
+test_plane_position_with_output(data_t *data, enum pipe pipe, igt_output_t *output,
+ int max_planes, uint64_t tiling)
+{
+ test_position_t test = { .data = data };
+ igt_crc_t *crc = NULL;
+ color_t blue = { 0.0f, 0.0f, 1.0f };
+ int n;
+ bool test_atomic = test_is_atomic(igt_subtest_name());
+ int iterations = 12;
+
+ if (test_atomic)
+ igt_require(data->display.is_atomic);
+
+ igt_info("running test for dozen iterations\n");
+
+ for (int i = 0; i < iterations; i++) {
+ igt_info("%d/%d: Testing connector %s using pipe %s with %d planes\n",
+ i+1, iterations, igt_output_name(output),
+ kmstest_pipe_name(pipe), max_planes);
+
+ test_init(data, pipe);
+
+ test_grab_crc(data, output, pipe, &blue, tiling,
+ &test.reference_crc);
+
+ test_planes(data, pipe, &blue, tiling, max_planes, output);
+
+ if (test_atomic) {
+ igt_display_commit_atomic(&data->display,
+ DRM_MODE_PAGE_FLIP_EVENT,
+ &data->display);
+ } else
+ igt_display_commit2(&data->display, COMMIT_LEGACY);
+
+ igt_pipe_crc_start(data->pipe_crc);
+ n = igt_pipe_crc_get_crcs(data->pipe_crc, 1, &crc);
+ igt_assert_eq(n, 1);
+ igt_pipe_crc_stop(data->pipe_crc);
+
+ igt_assert_crc_equal(&test.reference_crc, crc);
+
+ test_fini(data, output, max_planes);
+ }
+}
+
+static void
+test_plane_position(data_t *data, enum pipe pipe, int max_planes,
+ uint64_t tiling)
+{
+ igt_output_t *output;
+ int connected_outs;
+
+ igt_skip_on(pipe >= data->display.n_pipes);
+ igt_skip_on(max_planes >= data->display.pipes[pipe].n_planes);
+
+ if (!opt.user_seed)
+ opt.seed = time(NULL);
+
+ srand(opt.seed);
+ logwrite(igt_subtest_name());
+
+ connected_outs = 0;
+ for_each_connected_output(&data->display, output) {
+ test_plane_position_with_output(data, pipe, output,
+ max_planes, tiling);
+ connected_outs++;
+ }
+
+ igt_skip_on(connected_outs == 0);
+
+}
+
+static void
+run_tests_for_pipe_plane(data_t *data, enum pipe pipe, int max_planes)
+{
+ igt_subtest_f("legacy-pipe-%s-tiling-none-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_DRM_FORMAT_MOD_NONE);
+
+ igt_subtest_f("atomic-pipe-%s-tiling-none-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_X_TILED);
+
+ igt_subtest_f("legacy-pipe-%s-tiling-x-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_X_TILED);
+
+ igt_subtest_f("atomic-pipe-%s-tiling-x-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_X_TILED);
+
+ igt_subtest_f("legacy-pipe-%s-tiling-y-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_Y_TILED);
+
+ igt_subtest_f("atomic-pipe-%s-tiling-y-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_Y_TILED);
+
+ igt_subtest_f("legacy-pipe-%s-tiling-yf-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_Yf_TILED);
+
+ igt_subtest_f("atomic-pipe-%s-tiling-yf-planes-%d",
+ kmstest_pipe_name(pipe), max_planes)
+ test_plane_position(data, pipe, max_planes, LOCAL_I915_FORMAT_MOD_Yf_TILED);
+}
+
+static void
+run_tests_for_pipe(data_t *data, enum pipe pipe)
+{
+ for (int planes = 1; planes < IGT_MAX_PLANES; planes++)
+ run_tests_for_pipe_plane(data, pipe, planes);
+}
+
+static data_t data;
+
+static int opt_handler(int option, int option_index, void *input)
+{
+ switch (option) {
+ case 's':
+ opt.user_seed = true;
+ opt.seed = strtol(optarg, NULL, 0);
+ break;
+ case 'l':
+ opt.user_logfile = true;
+ strcpy(opt.logfile, optarg);
+ break;
+ default:
+ igt_assert(false);
+ }
+
+ return 0;
+}
+
+const char *help_str =
+ " --seed Seed for random number generator\n"
+ " --logfile Logfile to store seeds for random number generator, default 'kms_plane_multiple.log'\n";
+
+int main(int argc, char *argv[])
+{
+ time_t t = time(NULL);
+ struct tm tm = *localtime(&t);
+
+ struct option long_options[] = {
+ { "seed", required_argument, NULL, 's'},
+ { "logfile", required_argument, NULL, 'l'},
+ { 0, 0, 0, 0 }
+ };
+
+ igt_subtest_init_parse_opts(&argc, argv, "", long_options, help_str,
+ opt_handler, NULL);
+
+ if (!opt.user_logfile)
+ sprintf(opt.logfile, "kms_plane_multiple-%4d-%2d-%2d.log",
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
+
+ igt_skip_on_simulation();
+
+ igt_fixture {
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+
+ kmstest_set_vt_graphics_mode();
+
+ igt_require_pipe_crc();
+ igt_display_init(&data.display, data.drm_fd);
+ }
+
+ for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
+ run_tests_for_pipe(&data, pipe);
+
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
+
+ igt_exit();
+}
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
