On Tue, Oct 11, 2016 at 10:04:00PM +0200, Maarten Maathuis wrote: > My name does not include the word "show" (Tested-by tag). Sorry about that. Some copy-paste fail I suspect. I'll fix it up. And you actually tested the v1 patches, so I totally forgot to note that in the tested-by tags :( Care to re-test these v2 versions, just to make sure I didn't seriously fumble anything? > > On Tue, Oct 11, 2016 at 7:52 PM, <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > > The VBT provides the platform a way to mix and match the DDI ports vs. > > GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose > > has no standard GMBUS pin assignment. However, there are machines out > > there that use a non-standard mapping for the other ports as well. > > Let's start trusting the VBT on this one for all ports on DDI platforms. > > > > I've structured the code such that other platforms could easily start > > using this as well, by simply filling in the ddi_port_info. IIRC there > > may be CHV system that might actually need this. > > > > v2: Include a commit message, include a debug message during init > > > > Cc: stable@xxxxxxxxxxxxxxx > > Cc: Maarten Maathuis <madman2003@xxxxxxxxx> > > Tested-by: Maarten Maatt show huis <madman2003@xxxxxxxxx> > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > --- > > drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++++++++++++-------- > > --------- > > 1 file changed, 48 insertions(+), 36 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c > > b/drivers/gpu/drm/i915/intel_hdmi.c > > index 8d46f5836746..9ca86e901fc8 100644 > > --- a/drivers/gpu/drm/i915/intel_hdmi.c > > +++ b/drivers/gpu/drm/i915/intel_hdmi.c > > @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi > > *intel_hdmi, struct drm_connector *c > > intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; > > } > > > > +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, > > + enum port port) > > +{ > > + const struct ddi_vbt_port_info *info = > > + &dev_priv->vbt.ddi_port_info[port]; > > + u8 ddc_pin; > > + > > + if (info->alternate_ddc_pin) { > > + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", > > + info->alternate_ddc_pin, port_name(port)); > > + return info->alternate_ddc_pin; > > + } > > + > > + switch (port) { > > + case PORT_B: > > + if (IS_BROXTON(dev_priv)) > > + ddc_pin = GMBUS_PIN_1_BXT; > > + else > > + ddc_pin = GMBUS_PIN_DPB; > > + break; > > + case PORT_C: > > + if (IS_BROXTON(dev_priv)) > > + ddc_pin = GMBUS_PIN_2_BXT; > > + else > > + ddc_pin = GMBUS_PIN_DPC; > > + break; > > + case PORT_D: > > + if (IS_CHERRYVIEW(dev_priv)) > > + ddc_pin = GMBUS_PIN_DPD_CHV; > > + else > > + ddc_pin = GMBUS_PIN_DPD; > > + break; > > + default: > > + MISSING_CASE(port); > > + ddc_pin = GMBUS_PIN_DPB; > > + break; > > + } > > + > > + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform > > default)\n", > > + ddc_pin, port_name(port)); > > + > > + return ddc_pin; > > +} > > + > > void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, > > struct intel_connector *intel_connector) > > { > > @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct > > intel_digital_port *intel_dig_port, > > struct drm_device *dev = intel_encoder->base.dev; > > struct drm_i915_private *dev_priv = to_i915(dev); > > enum port port = intel_dig_port->port; > > - uint8_t alternate_ddc_pin; > > > > DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", > > port_name(port)); > > @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct > > intel_digital_port *intel_dig_port, > > connector->doublescan_allowed = 0; > > connector->stereo_allowed = 1; > > > > + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); > > + > > switch (port) { > > case PORT_B: > > - if (IS_BROXTON(dev_priv)) > > - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; > > - else > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; > > /* > > * On BXT A0/A1, sw needs to activate DDIA HPD logic and > > * interrupts to check the external panel connection. > > @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct > > intel_digital_port *intel_dig_port, > > intel_encoder->hpd_pin = HPD_PORT_B; > > break; > > case PORT_C: > > - if (IS_BROXTON(dev_priv)) > > - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; > > - else > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; > > intel_encoder->hpd_pin = HPD_PORT_C; > > break; > > case PORT_D: > > - if (WARN_ON(IS_BROXTON(dev_priv))) > > - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; > > - else if (IS_CHERRYVIEW(dev_priv)) > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; > > - else > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; > > intel_encoder->hpd_pin = HPD_PORT_D; > > break; > > case PORT_E: > > - /* On SKL PORT E doesn't have seperate GMBUS pin > > - * We rely on VBT to set a proper alternate GMBUS pin. */ > > - alternate_ddc_pin = > > - dev_priv->vbt.ddi_port_info[ > > PORT_E].alternate_ddc_pin; > > - switch (alternate_ddc_pin) { > > - case DDC_PIN_B: > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; > > - break; > > - case DDC_PIN_C: > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; > > - break; > > - case DDC_PIN_D: > > - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; > > - break; > > - default: > > - MISSING_CASE(alternate_ddc_pin); > > - } > > intel_encoder->hpd_pin = HPD_PORT_E; > > break; > > - case PORT_A: > > - intel_encoder->hpd_pin = HPD_PORT_A; > > - /* Internal port only for eDP. */ > > default: > > - BUG(); > > + MISSING_CASE(port); > > + return; > > } > > > > if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { > > -- > > 2.7.4 > > > > > > > -- > Far away from the primal instinct, the song seems to fade away, the river > get wider between your thoughts and the things we do and say. -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
