On Tue, 2016-09-27 at 14:26 +0300, Imre Deak wrote:
> On ti, 2016-09-27 at 11:03 +0300, Ander Conselvan De Oliveira wrote:
> >
> > On Mon, 2016-09-26 at 17:54 +0300, Imre Deak wrote:
> > >
> > > a277ca7dc01d should've been a no-functional-change commit, but it
> > > removed the initialization of the dpll_hw_state for HDMI outputs,
> > > resulting in state mismatches and a failed modeset with blank
> > > screen. Fix this by reinstating the dpll_hw_state initialization.
> > >
> > > Fixes: a277ca7dc01d ("drm/i915: Split bxt_ddi_pll_select()")
> > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/intel_dpll_mgr.c | 21 ++++++++++++++++-----
> > > 1 file changed, 16 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > index c26d18a..e8bf838 100644
> > > --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > @@ -1694,21 +1694,32 @@ bool bxt_ddi_dp_set_dpll_hw_state(int
> > > clock,
> > > return bxt_ddi_set_dpll_hw_state(clock, &clk_div,
> > > dpll_hw_state);
> > > }
> > >
> > > +bool bxt_ddi_hdmi_set_dpll_hw_state(struct intel_crtc *intel_crtc,
> > > + struct intel_crtc_state
> > > *crtc_state,
> > > + int clock,
> > > + struct intel_dpll_hw_state
> > > *dpll_hw_state)
> > > +{
> > > + struct bxt_clk_div clk_div = { };
> > > +
> > > + bxt_ddi_hdmi_pll_dividers(intel_crtc, crtc_state, clock,
> > > &clk_div);
> > > +
> > > + return bxt_ddi_set_dpll_hw_state(clock, &clk_div,
> > > dpll_hw_state);
> > > +}
> > > +
> > > static struct intel_shared_dpll *
> > > bxt_get_dpll(struct intel_crtc *crtc,
> > > struct intel_crtc_state *crtc_state,
> > > struct intel_encoder *encoder)
> > > {
> > > - struct bxt_clk_div clk_div = {0};
> > > - struct intel_dpll_hw_state dpll_hw_state = {0};
> > > + struct intel_dpll_hw_state dpll_hw_state = { };
> > > struct drm_i915_private *dev_priv = to_i915(crtc-
> > > >
> > > > base.dev);
> > > struct intel_digital_port *intel_dig_port;
> > > struct intel_shared_dpll *pll;
> > > int i, clock = crtc_state->port_clock;
> > >
> > > - if (encoder->type == INTEL_OUTPUT_HDMI
> > > - && !bxt_ddi_hdmi_pll_dividers(crtc, crtc_state,
> > > - clock, &clk_div))
> > > + if (encoder->type == INTEL_OUTPUT_HDMI &&
> > > + !bxt_ddi_hdmi_set_dpll_hw_state(crtc, crtc_state,
> > > clock,
> > > + &dpll_hw_state))
> > In my original patch there was just a straight call
> > to bxt_ddi_set_dpll_hw_state() after this and the DP if condition
> > (which also only calculated dividers).
> That would require exporting bxt_ddi_dp_pll_dividers(), so I just left
> it as-is.
Not necessarily, bxt_ddi_dp_set_dpll_hw_state() could still be exported for the
caller. But the current solution is fine.
An even better solution would be to have a somewhat platform independent entry
point for force enabling a DPLL independent of modeset with a given clock for
DP. The caller of bxt_ddi_dp_set_dpll_hw_state() will immediately enable the
DPLL anyway, so it could instead just ask the DPLL code to do the right thing
and enable the PLL and leave as much of the platform specific part out of the
caller.
Ander
> I forgot to make bxt_ddi_hdmi_set_dpll_hw_state() static, I
> fixed that up while applying.
>
> Pushed to -dinq, thanks for the review.
>
> >
> > But whatever fixes the issue:
> > Reviewed-by: Ander Conselvan de Oliveira <conselvan2@xxxxxxxxx>
> >
> >
> > >
> > > return NULL;
> > >
> > > if ((encoder->type == INTEL_OUTPUT_DP ||
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
