On Wed, 21 Sep 2016, Giacomo Comes <comes@xxxxxxxx> wrote: > Hi, > I hope this is the appropriate place to ask what follows. > If not please point me to the right place. > > I have a couple of cerryview systems > (Acer Aspire R11 and Intel compute stick STK1AW32SC) on which > I run linux (openSUSE 42.1) with a 4.7 kernel. > > I have a problem though with the sd card reader: > in normal condition the kernel does not see the card reader. > The modules pinctrl-cherryview.ko and sdhci-pci.ko are both > loaded but the sd device is missing. > > Following the suggestion found here: > https://bugzilla.opensuse.org/show_bug.cgi?id=954532#c24 > I "fixed" the problem by adding the module pinctrl-cherryview > in the initrd. > > I was wondering if the necessity to put pinctrl-cherryview in > the initrd is due to a bug in the kernel driver or it is a distro > issue. Hi Giacomo, intel-gfx is about Intel *graphics*. We are mostly clueless about SD cards here. ;) Mika, Andy, could you point Giacomo to the right place please? Thanks, Jani. -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
