Changing the return type from 'char' to 'enum port' in intel_dvo_port_name() makes it easier to later move the port information to intel_encoder. In addition, the port type conforms to what we have elsewhere. Removing the last conditional that handles invalid port because dvo_reg is intialized to valid values for all DVO devices at definition. v2: Changed return type, for real (Jani) Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_dvo.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 2e452c5..6489755 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -412,16 +412,14 @@ intel_dvo_get_current_mode(struct drm_connector *connector) return mode; } -static char intel_dvo_port_name(i915_reg_t dvo_reg) +static enum port intel_dvo_port(i915_reg_t dvo_reg) { if (i915_mmio_reg_equal(dvo_reg, DVOA)) - return 'A'; + return PORT_A; else if (i915_mmio_reg_equal(dvo_reg, DVOB)) - return 'B'; - else if (i915_mmio_reg_equal(dvo_reg, DVOC)) - return 'C'; + return PORT_B; else - return '?'; + return PORT_C; } void intel_dvo_init(struct drm_device *dev) @@ -464,6 +462,7 @@ void intel_dvo_init(struct drm_device *dev) bool dvoinit; enum pipe pipe; uint32_t dpll[I915_MAX_PIPES]; + enum port port; /* Allow the I2C driver info to specify the GPIO to be used in * special cases, but otherwise default to what's defined @@ -511,9 +510,10 @@ void intel_dvo_init(struct drm_device *dev) if (!dvoinit) continue; + port = intel_dvo_port(dvo->dvo_reg); drm_encoder_init(dev, &intel_encoder->base, &intel_dvo_enc_funcs, encoder_type, - "DVO %c", intel_dvo_port_name(dvo->dvo_reg)); + "DVO %c", port_name(port)); intel_encoder->type = INTEL_OUTPUT_DVO; intel_encoder->crtc_mask = (1 << 0) | (1 << 1); -- 2.5.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx