And use it to move knowledge about the SAGV-supporting platforms from
the callers to the SAGV code.
We'll add more platforms to intel_has_sagv(), so IMHO it makes more
sense to move all this to a single function instead of patching all
the callers every time we add SAGV support to a new platform.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 5 ++---
drivers/gpu/drm/i915/intel_pm.c | 15 +++++++++++++++
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4dd4961..2442ab2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14379,7 +14379,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
* SKL workaround: bspec recommends we disable the SAGV when we
* have more then one pipe enabled
*/
- if (IS_SKYLAKE(dev_priv) && !intel_can_enable_sagv(state))
+ if (!intel_can_enable_sagv(state))
intel_disable_sagv(dev_priv);
intel_modeset_verify_disabled(dev);
@@ -14437,8 +14437,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
intel_modeset_verify_crtc(crtc, old_crtc_state, crtc->state);
}
- if (IS_SKYLAKE(dev_priv) && intel_state->modeset &&
- intel_can_enable_sagv(state))
+ if (intel_state->modeset && intel_can_enable_sagv(state))
intel_enable_sagv(dev_priv);
drm_atomic_helper_commit_hw_done(state);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 32588e3..af75011 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2884,6 +2884,12 @@ skl_wm_plane_id(const struct intel_plane *plane)
}
}
+static bool
+intel_has_sagv(struct drm_i915_private *dev_priv)
+{
+ return IS_SKYLAKE(dev_priv);
+}
+
/*
* SAGV dynamically adjusts the system agent voltage and clock frequencies
* depending on power and performance requirements. The display engine access
@@ -2900,6 +2906,9 @@ intel_enable_sagv(struct drm_i915_private *dev_priv)
{
int ret;
+ if (!intel_has_sagv(dev_priv))
+ return 0;
+
if (dev_priv->sagv_status == I915_SAGV_NOT_CONTROLLED ||
dev_priv->sagv_status == I915_SAGV_ENABLED)
return 0;
@@ -2949,6 +2958,9 @@ intel_disable_sagv(struct drm_i915_private *dev_priv)
{
int ret, result;
+ if (!intel_has_sagv(dev_priv))
+ return 0;
+
if (dev_priv->sagv_status == I915_SAGV_NOT_CONTROLLED ||
dev_priv->sagv_status == I915_SAGV_DISABLED)
return 0;
@@ -2991,6 +3003,9 @@ bool intel_can_enable_sagv(struct drm_atomic_state *state)
enum pipe pipe;
int level, plane;
+ if (!intel_has_sagv(dev_priv))
+ return false;
+
/*
* SKL workaround: bspec recommends we disable the SAGV when we have
* more then one pipe enabled
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
