On Tue, Jul 26, 2016 at 12:07 PM, <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Replace the use of drm_plane_helper_check_update() with
> drm_plane_helper_check_state() since we have a plane state.
>
> This also eliminates the double clipping the driver was doing
> in both check and commit phases). And it should fix src coordinate
> addr adjustement. Previously the driver was expecting negative dst
> coordinates after clipping, which is not going happen, so any clipping
> induced addr adjustment simply didn't happen. Neither did the driver
> respect any user configured src coordinates, so panning and such would
> have been totally broken. It should be all good now.
>
> Cc: CK Hu <ck.hu@xxxxxxxxxxxx>
> Cc: linux-mediatek@xxxxxxxxxxxxxxxxxxx
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_plane.c | 72 +++++++++-----------------------
> 1 file changed, 20 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index 3995765a90dc..5f2516fca079 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -30,15 +30,20 @@ static const u32 formats[] = {
> DRM_FORMAT_RGB565,
> };
>
> -static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane, bool enable,
> - dma_addr_t addr, struct drm_rect *dest)
> +static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane,
> + dma_addr_t addr)
> {
> struct drm_plane *plane = &mtk_plane->base;
> struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
> unsigned int pitch, format;
> - int x, y;
> + bool enable;
>
> - if (WARN_ON(!plane->state || (enable && !plane->state->fb)))
> + if (WARN_ON(!plane->state))
> + return;
> +
> + enable = state->base.visible;
> +
> + if (WARN_ON(enable && !plane->state->fb))
> return;
>
> if (plane->state->fb) {
> @@ -49,27 +54,17 @@ static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane, bool enable,
> format = DRM_FORMAT_RGBA8888;
> }
>
> - x = plane->state->crtc_x;
> - y = plane->state->crtc_y;
> -
> - if (x < 0) {
> - addr -= x * 4;
> - x = 0;
> - }
> -
> - if (y < 0) {
> - addr -= y * pitch;
> - y = 0;
> - }
> + addr += (state->base.src.x1 >> 16) * 4;
> + addr += (state->base.src.y1 >> 16) * pitch;
>
> state->pending.enable = enable;
> state->pending.pitch = pitch;
> state->pending.format = format;
> state->pending.addr = addr;
> - state->pending.x = x;
> - state->pending.y = y;
> - state->pending.width = dest->x2 - dest->x1;
> - state->pending.height = dest->y2 - dest->y1;
> + state->pending.x = state->base.dst.x1;
> + state->pending.y = state->base.dst.y1;
> + state->pending.width = drm_rect_width(&state->base.dst);
> + state->pending.height = drm_rect_height(&state->base.dst);
> wmb(); /* Make sure the above parameters are set before update */
> state->pending.dirty = true;
> }
> @@ -134,20 +129,6 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
> {
> struct drm_framebuffer *fb = state->fb;
> struct drm_crtc_state *crtc_state;
> - bool visible;
> - struct drm_rect dest = {
> - .x1 = state->crtc_x,
> - .y1 = state->crtc_y,
> - .x2 = state->crtc_x + state->crtc_w,
> - .y2 = state->crtc_y + state->crtc_h,
> - };
> - struct drm_rect src = {
> - /* 16.16 fixed point */
> - .x1 = state->src_x,
> - .y1 = state->src_y,
> - .x2 = state->src_x + state->src_w,
> - .y2 = state->src_y + state->src_h,
> - };
> struct drm_rect clip = { 0, };
>
> if (!fb)
> @@ -168,12 +149,10 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
> clip.x2 = crtc_state->mode.hdisplay;
> clip.y2 = crtc_state->mode.vdisplay;
>
> - return drm_plane_helper_check_update(plane, state->crtc, fb,
> - &src, &dest, &clip,
> - state->rotation,
> - DRM_PLANE_HELPER_NO_SCALING,
> - DRM_PLANE_HELPER_NO_SCALING,
> - true, true, &visible);
> + return drm_plane_helper_check_state(state, &clip,
> + DRM_PLANE_HELPER_NO_SCALING,
> + DRM_PLANE_HELPER_NO_SCALING,
> + true, true);
> }
>
> static void mtk_plane_atomic_update(struct drm_plane *plane,
> @@ -184,24 +163,13 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
> struct drm_gem_object *gem;
> struct mtk_drm_gem_obj *mtk_gem;
> struct mtk_drm_plane *mtk_plane = to_mtk_plane(plane);
> - struct drm_rect dest = {
> - .x1 = state->base.crtc_x,
> - .y1 = state->base.crtc_y,
> - .x2 = state->base.crtc_x + state->base.crtc_w,
> - .y2 = state->base.crtc_y + state->base.crtc_h,
> - };
> - struct drm_rect clip = { 0, };
>
> if (!crtc)
> return;
>
> - clip.x2 = state->base.crtc->state->mode.hdisplay;
> - clip.y2 = state->base.crtc->state->mode.vdisplay;
> - drm_rect_intersect(&dest, &clip);
> -
> gem = mtk_fb_get_gem_obj(state->base.fb);
> mtk_gem = to_mtk_gem_obj(gem);
> - mtk_plane_enable(mtk_plane, true, mtk_gem->dma_addr, &dest);
> + mtk_plane_enable(mtk_plane, mtk_gem->dma_addr);
> }
>
> static void mtk_plane_atomic_disable(struct drm_plane *plane,
> --
> 2.7.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
