From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
With HSW + Dell UP2414Q (at least) drm_probe_ddc() occasionally fails,
and then we'll assume that the entire display has been disconnected.
We don't need the EDID from the main link, so we can simply check if
the sink is MST capable, and if so treat is as connected.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>
Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
Cc: Manasi D Navare <manasi.d.navare@xxxxxxxxx>
Cc: Durgadoss R <durgadoss.r@xxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 45 +++++++++++++++++++++++++++--------------
1 file changed, 30 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 3a9c5d3b5c66..4a4184c21989 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3538,7 +3538,7 @@ intel_dp_probe_oui(struct intel_dp *intel_dp)
}
static bool
-intel_dp_probe_mst(struct intel_dp *intel_dp)
+intel_dp_can_mst(struct intel_dp *intel_dp)
{
u8 buf[1];
@@ -3551,18 +3551,30 @@ intel_dp_probe_mst(struct intel_dp *intel_dp)
if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
return false;
- if (drm_dp_dpcd_read(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
- if (buf[0] & DP_MST_CAP) {
- DRM_DEBUG_KMS("Sink is MST capable\n");
- intel_dp->is_mst = true;
- } else {
- DRM_DEBUG_KMS("Sink is not MST capable\n");
- intel_dp->is_mst = false;
- }
- }
+ if (drm_dp_dpcd_read(&intel_dp->aux, DP_MSTM_CAP, buf, 1) != 1)
+ return false;
- drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
- return intel_dp->is_mst;
+ return buf[0] & DP_MST_CAP;
+}
+
+static void
+intel_dp_configure_mst(struct intel_dp *intel_dp)
+{
+ if (!i915.enable_dp_mst)
+ return;
+
+ if (!intel_dp->can_mst)
+ return;
+
+ intel_dp->is_mst = intel_dp_can_mst(intel_dp);
+
+ if (intel_dp->is_mst)
+ DRM_DEBUG_KMS("Sink is MST capable\n");
+ else
+ DRM_DEBUG_KMS("Sink is not MST capable\n");
+
+ drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
+ intel_dp->is_mst);
}
static int intel_dp_sink_crc_stop(struct intel_dp *intel_dp)
@@ -3993,6 +4005,9 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
if (drm_probe_ddc(&intel_dp->aux.ddc))
return connector_status_connected;
+ if (intel_dp_can_mst(intel_dp))
+ return connector_status_connected;
+
/* Well we tried, say unknown for unreliable port types */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
@@ -4213,7 +4228,6 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
struct drm_device *dev = connector->dev;
enum drm_connector_status status;
enum intel_display_power_domain power_domain;
- bool ret;
u8 sink_irq_vector;
power_domain = intel_display_port_aux_power_domain(intel_encoder);
@@ -4249,8 +4263,9 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
intel_dp_probe_oui(intel_dp);
- ret = intel_dp_probe_mst(intel_dp);
- if (ret) {
+ intel_dp_configure_mst(intel_dp);
+
+ if (intel_dp->is_mst) {
/*
* If we are in MST mode then this connector
* won't appear connected or have anything
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
