Hi Michael,
Do you resolved this problem?
I'm having the same issue with cyrus 3.0.9 not accessing
cyrus.squat files.
I've put in my impad.conf:
search_engine: squat
search_fuzzy_always: 1
Any recomendation will be appreciated.
Best regards,
Carlos.
El 25/10/2018 a las 15:09, Michael
Menge escribió:
Hi,
Quoting Michael Menge <michael.menge@xxxxxxxxxxxxxxxxxxxx>:
Hi,
Quoting Albert Shih <Albert.Shih@xxxxxxxx>:
Le 17/09/2018 à 14:01:52+0200, Michael
Menge a écrit
Hi,
we recently upgrade from Cyrus-Imapd 2.4.x to 3.0.8. After
some initial
problems
which we could fix cyrus imapd 3.0.8 is running stable. The
one remaining
problem
we receive reports about is, that the search is not
working/too slow.
First we discovered that one of the options for Squatter are
not supported
anymore, "-s Skip mailboxes whose index file is older than
their current
squat file (within a small time delta)." and that squatter
does not like
"-r" in combination with the source "user"
> squatter -C /etc/imapd_be.conf -r user
fatal error: Internal error: assertion failed:
lib/cyrusdb_twoskip.c:
2339: keylen
But after reindexing all mailboxes the search is still slow.
I tried to
debug this and
found with strace that cyrus didn't try to open the
cyrus.squat file for the
mailbox.
I suspect that I am missed some configuration change. So
here is our
imapd.conf for our backends
If I'm correct you need :
search_fuzzy_always: on
in your config.
If you can tell me if it's work...I would really appreciate.
Because I
activated that but I'm not able to see if it's work really.
Thanks for your help.
I did tried it on my test server and it seems to be a bit
faster,
but that could be due to caching. Strace still didn't show any
access
to the cyrus.squat file.
For information: We only use squatter. No Xapia. And we had much
faster
search with Cyrus-Imapd 2.3.x and 2.4.x. I don't have the
timings form
the old system but our users are complaining and they receive
timeouts
in our horde/imp webmailer, which they did't receive before.
Any other ideas are appreciated.
I still have the problem that search in cyrus imap 3.0.8 with
search engine
squatter is slow compared to 2.4.20. I try to figure out if the
squatter
search engine is working in cyurs imapd 3.0 and I messed up my
configuration,
or if my configuration should work but squatter is broken.
I did set up a test environment to compare the old and new
versions.
To verify that the search is indeed slower with 3.0.8
I used two different searches 'B SEARCH TEXT "Test"' and 'B SEARCH
HEADER X-comment Unirundmail'
=== 2.4.20 === SEARCH TEXT
A SELECT INBOX
* 4321 EXISTS
* 4321 RECENT
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen
\*)] Ok
* OK [UNSEEN 1] Ok
* OK [UIDVALIDITY 1540372444] Ok
* OK [UIDNEXT 93369] Ok
* OK [HIGHESTMODSEQ 2] Ok
* OK [URLMECH INTERNAL] Ok
A OK [READ-WRITE] Completed
B SEARCH TEXT "Test"
* SEARCH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31 33 34 35 36 37 38 39
....
4292 4294 4295 4296 4298 4299 4300 4301 4303 4306 4307 4309 4310
4315 4316 4317 4318 4321
B OK Completed (1996 msgs in 0.690 secs)
=== 3.0.8 === SEARCH TEXT
a SELECT INBOX
* 4321 EXISTS
* 0 RECENT
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen NonJunk
$Forwarded $mdnsent $label1 $label2 $label3 hordetest testflag)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen
NonJunk $Forwarded $mdnsent $label1 $label2 $label3 hordetest
testflag \*)] Ok
* OK [UNSEEN 3737] Ok
* OK [UIDVALIDITY 1238498084] Ok
* OK [UIDNEXT 93373] Ok
* OK [HIGHESTMODSEQ 98491] Ok
* OK [URLMECH INTERNAL] Ok
* OK [ANNOTATIONS 65536] Ok
a OK [READ-WRITE] Completed
B SEARCH TEXT "Test"
* SEARCH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31 33 34 35 36 37 38 39
....
4274 4275 4276 4277 4278 4279 4285 4286 4287 4288 4292 4294 4295
4296 4298 4299 4300 4301 4303 4306 4307 4309 4310 4315 4316 4317
4318 4321
B OK Completed (1935 msgs in 2.580 secs)
==== 2.4.20 === SEARCH HEADER
a SELECT INBOX
* 4321 EXISTS
* 0 RECENT
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen
\*)] Ok
* OK [UNSEEN 1] Ok
* OK [UIDVALIDITY 1540372444] Ok
* OK [UIDNEXT 93369] Ok
* OK [HIGHESTMODSEQ 2] Ok
* OK [URLMECH INTERNAL] Ok
a OK [READ-WRITE] Completed
b SEARCH HEADER X-comment Unirundmail
* SEARCH 4283 4291 4313 4319 4320
b OK Completed (5 msgs in 0.020 secs)
==== 3.0.8 === SEARCH HEADER
a SELECT INBOX
* 4321 EXISTS
* 0 RECENT
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen NonJunk
$Forwarded $mdnsent $label1 $label2 $label3 hordetest testflag)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen
NonJunk $Forwarded $mdnsent $label1 $label2 $label3 hordetest
testflag \*)] Ok
* OK [UNSEEN 3737] Ok
* OK [UIDVALIDITY 1238498084] Ok
* OK [UIDNEXT 93373] Ok
* OK [HIGHESTMODSEQ 98491] Ok
* OK [URLMECH INTERNAL] Ok
* OK [ANNOTATIONS 65536] Ok
a OK [READ-WRITE] Completed
b SEARCH HEADER X-comment Unirundmail
* SEARCH 4283 4291 4313 4319 4320
b OK Completed (5 msgs in 0.370 secs)
===
There is also a big discrepancy between time indicated in the "OK
Completed" and the time from
sending the search command till the return of the result, which is
0.890 sec compared to ~30 sec
on the production system.
I used strace on the imapd processes while searching to verify
that the squat file was used
in 2.4 but not in 3.0.
I could see open events for the squat file and the messages that
where found for 2.4.20
and no open event (not even a failed one) to the squat file but
instead open events for
all message files in that folder for 3.0.8
I read the documentation and source code and tried to figure out
if i am missing some
config options, or if i could pinpoint a function where the search
was turning the
wrong way. I used "perf -g" the see the call graphs and to figure
out where the
call graphs change
I can see that the same functions are called up to "index_search",
and that the called functions
change at that point. I know that the search code got restructured
to support different search
engines and that some functions got renamed. I have attached the
perf report output, so that
someone with a better understanding of the code can see whats
going on. I can provide the
perf.data files if it helps.
Can someone confirm or refute that the squatter search engine is
working with cyrus imapd 3.0.x?
Is "search_engine: squat" in imapd.conf and a "squatter" event in
cyrus.conf is sufficient to
use the squatter search index in 3.0 or are there other options
steps required.
Regards
Michael Menge
PS. link to my original post with my imapd.conf
https://lists.andrew.cmu.edu/pipermail/info-cyrus/2018-September/040395.html
--------------------------------------------------------------------------------
M.Menge Tel.: (49) 7071/29-70316
Universität Tübingen Fax.: (49) 7071/29-5912
Zentrum für Datenverarbeitung mail:
michael.menge@xxxxxxxxxxxxxxxxxxxx
Wächterstraße 76
72074 Tübingen
----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
|
Attachment:
smime.p7s
Description: Firma criptográfica S/MIME
----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
