On Thu, December 13, 2018 13:25, Egoitz Aurrekoetxea wrote: > Hi again! > > > Else as a simplication way can you replicate any manner a 2.3 with some > newer version?. At least in manual mode (not rolling)?. The replication protocol in 2.4 is not compatible wit 2.3. There is no easy way. I'm rsync'ing one account at a time between 2.3 and 2.4 with IMAP/POP and LMTP access disabled, followed by a reconstruct, and then enabling IMAP/POP and LMTP access. Many terrabytes to go. You could also look at imapsync but its slow. > > Cheers. > > > --- > > > EGOITZ AURREKOETXEA > Departamento de sistemas > 944 209 470 > Parque Tecnológico. Edificio 103 > 48170 Zamudio (Bizkaia) > egoitz@xxxxxxxxxx www.sarenet.es [1] Antes de imprimir este correo electrónico piense si es > necesario hacerlo. > > El 13-12-2018 16:52, Egoitz Aurrekoetxea escribió: > > >> Good afternoon, >> >> >> I was trying to upgrade part of our Cyrus imap installation, concretely that one consisting in >> still 2.3. I was planning to set up Cyrus 3.0. I have seen all works properly except for the >> unexpunge command because as someone stated here, a reconstruct -V max was needed.The problem >> is that this reconstruct command, takes ages and I'm not able to keep the service offline so >> many time. So I have been thinking in the following scenario : >> >> - Cyrus 2.3 master -> Cyrus 2.4 slave >> >> >> Get this 2.4 slave ready and set it as master. But here comes my first doubt. Does the 2.4 >> replication work with the 2.3 replication?. Can in this pair, both (the 2.3 and the 2.4) be >> both master and slave?. I mean to switch roles in the pair. Make one become master and the >> other slave and vice versa?. >> >> Let's think now Cyrus 2.4 is ready and working. >> >> >> - Now, I would set up a new 3.0 slave. I know 2.4 could replicate with 3.0. So I would get the >> 3.0 ready and then set 3.0 as master. Can in this pair both the 2.4 and 3.0 be master and >> slave?. Meaning again to the same role switching commented before... to make one to be master >> and the other slave or vice versa.... >> >> I'l will end up with 2 3.0 master and slave... but I need to trace the path... >> >> >> Does anyone see any other way?. >> >> >> Best regards, >> >> >> - >> >> >> -- >> >> >> EGOITZ AURREKOETXEA >> Departamento de sistemas >> 944 209 470 >> Parque Tecnológico. Edificio 103 >> 48170 Zamudio (Bizkaia) >> egoitz@xxxxxxxxxx www.sarenet.es [1] Antes de imprimir este correo electrónico piense si es >> necesario hacerlo. ---- >> Cyrus Home Page: http://www.cyrusimap.org/ >> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/ >> To Unsubscribe: >> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus >> > > > Links: > ------ > [1] http://www.sarenet.es ---- Cyrus Home Page: http://www.cyrusimap.org/ List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/ To Unsubscribe: https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus
