I'm trying to get cyrus 2.2. on debian to accept mail for user bar. When exim4 sends the message to cyrus, this is the result. May 21 02:03:15 test-mail cyrus/master[17448]: about to exec /usr/lib/cyrus/bin/lmtpd May 21 02:03:15 test-mail cyrus/lmtpunix[17448]: executed May 21 02:03:15 test-mail cyrus/lmtpunix[17448]: accepted connection May 21 02:03:15 test-mail cyrus/lmtpunix[17448]: lmtp connection preauth'd as postman May 21 02:03:15 test-mail cyrus/lmtpunix[17448]: verify_user(foo.com!user.bar) failed: Mailbox does not exist This is strange, since the user certainly does exist: localhost.test.com> lm user/bar@xxxxxxx (\HasNoChildren) But when I try to operate upon the user in cyradmin, I get told that it doesn't exits, which is strange cause lm just listed the user: localhost.test.com> lam user/bar@xxxxxxx Mailbox does not exist localhost.test.com> So I get no mail delivered. What is going on? Am I missing something? Here is my imapd.conf # Debian Cyrus imapd.conf # $Id: imapd.conf 321 2006-03-27 23:15:15Z astronut $ # See imapd.conf(5) for more information and more options # Configuration directory configdirectory: /var/lib/cyrus # Which partition to use for default mailboxes defaultpartition: default partition-default: /var/spool/cyrus/mail # News setup partition-news: /var/spool/cyrus/news newsspool: /var/spool/news # Alternate namespace # If enabled, activate the alternate namespace as documented in # /usr/share/doc/cyrus-doc-2.2/html/altnamespace.html, where an user's # subfolders are in the same level as the INBOX # See also userprefix and sharedprefix on imapd.conf(5) altnamespace: no # UNIX Hierarchy Convention # Set to yes, and cyrus will accept dots in names, and use the forward # slash "/" to delimit levels of the hierarchy. This is done by converting # internally all dots to "^", and all "/" to dots. So the "rabbit.holes" # mailbox of user "helmer.fudd" is stored in "user.elmer^fud.rabbit^holes" unixhierarchysep: yes # Rejecting illegal characters in headers # Headers of RFC2882 messages must not have characters with the 8th bit # set. However, too many badly-written MUAs generate this, including most # spamware. Enable this to reject such messages. #reject8bit: yes # Munging illegal characters in headers # Headers of RFC2882 messages must not have characters with the 8th bit # set. However, too many badly-written MUAs generate this, including most # spamware. If you kept reject8bit disabled, you can choose to leave the # crappage untouched by disabling this (if you don't care that IMAP SEARCH # won't work right anymore. #munge8bit: no # Forcing recipient user to lowercase # Cyrus 2.2 is case-sensitive. If all your mail users are in lowercase, it is # probably a very good idea to set lmtp_downcase_rcpt to true. This is set by # default, per RFC2821. This was not set by default in debian versions up to # and including 2.2.12-4. lmtp_downcase_rcpt: yes # Uncomment the following and add the space-separated users who # have admin rights for all services. admins: cyrus # Space-separated list of users that have lmtp "admin" status (i.e. that # can deliver email through TCP/IP lmtp) in addition to those in the # admins: entry above lmtp_admins: postman # Space-separated list of users that have mupdate "admin" status, in # addition to those in the admins: entry above. Note that mupdate slaves and # backends in a Murder cluster need to autenticate against the mupdate master # as admin users. #mupdate_admins: mupdateman # Space-separated list of users that have imapd "admin" status, in # addition to those in the admins: entry above #imap_admins: cyrus # Space-separated list of users that have sieve "admin" status, in # addition to those in the admins: entry above #sieve_admins: cyrus # List of users and groups that are allowed to proxy for other users, # seperated by spaces. Any user listed in this will be allowed to login # for any other user. Like "admins:" above, you can have imap_proxyservers # and sieve_proxyservers. #proxyservers: cyrus # No anonymous logins allowanonymouslogin: no # Minimum time between POP mail fetches in minutes popminpoll: 1 # If nonzero, normal users may create their own IMAP accounts by creating # the mailbox INBOX. The user's quota is set to the value if it is positive, # otherwise the user has unlimited quota. autocreatequota: 0 # umask used by Cyrus programs umask: 077 # Sendmail binary location # DUE TO A BUG, Cyrus sends CRLF EOLs to this program. This breaks Exim 3. # For now, to work around the bug, set this to a wrapper that calls # /usr/sbin/sendmail -dropcr instead if you use Exim 3. #sendmail: /usr/sbin/sendmail # If enabled, cyrdeliver will look for Sieve scripts in user's home # directories: ~user/.sieve. sieveusehomedir: false # If sieveusehomedir is false, this directory is searched for Sieve scripts. sievedir: /var/spool/sieve # notifyd(8) method to use for "MAIL" notifications. If not set, "MAIL" # notifications are disabled. Valid methods are: null, log, zephyr #mailnotifier: zephyr # notifyd(8) method to use for "SIEVE" notifications. If not set, "SIEVE" # notifications are disabled. This method is only used when no method is # specified in the script. Valid methods are null, log, zephyr, mailto #sievenotifier: zephyr # DRAC (pop-before-smtp, imap-before-smtp) support # Set dracinterval to the time in minutes to call DRAC while a user is # connected to the imap/pop services. Set to 0 to disable DRAC (default) # Set drachost to the host where the rpc drac service is running #dracinterval: 0 #drachost: localhost # If enabled, the partitions will also be hashed, in addition to the hashing # done on configuration directories. This is recommended if one partition has a # very bushy mailbox tree. hashimapspool: true # Allow plaintext logins by default (SASL PLAIN) allowplaintext: yes # Force PLAIN/LOGIN authentication only # (you need to uncomment this if you are not using an auxprop-based SASL # mechanism. saslauthd users, that means you!). And pay attention to # sasl_minimum_layer and allowapop below, too. sasl_mech_list: PLAIN # Allow use of the POP3 APOP authentication command. # Note that this command requires that the plaintext passwords are # available in a SASL auxprop backend (eg. sasldb), and that the system # can provide enough entropy (eg. from /dev/urandom) to create a challenge # in the banner. #allowapop: no # The minimum SSF that the server will allow a client to negotiate. A # value of 1 requires integrity protection; any higher value requires some # amount of encryption. #sasl_minimum_layer: 0 # The maximum SSF that the server will allow a client to negotiate. A # value of 1 requires integrity protection; any higher value requires some # amount of encryption. #sasl_maximum_layer: 256 # List of remote realms whose users may log in using cross-realm # authentications. Seperate each realm name by a space. A cross-realm # identity is considered any identity returned by SASL with an "@" in it. # NOTE: To support multiple virtual domains on the same interface/IP, # you need to list them all as loginreals. If you don't list them here, # (most of) your users probably won't be able to log in. loginrealms: foo.com # Enable virtual domain support. If enabled, the user's domain will # be determined by splitting a fully qualified userid at the last '@' # or '%' symbol. If the userid is unqualified, and the virtdomains # option is set to "on", then the domain will be determined by doing # a reverse lookup on the IP address of the incoming network # interface, otherwise the user is assumed to be in the default # domain (if set). virtdomains: yes # The default domain for virtual domain support # If the domain of a user can't be taken from its login and it can't # be determined by doing a reverse lookup on the interface IP, this # domain is used. defaultdomain: test.com # # SASL library options (these are handled directly by the SASL libraries, # refer to SASL documentation for an up-to-date list of these) # # The mechanism(s) used by the server to verify plaintext passwords. Possible # values are "saslauthd", "auxprop", "pwcheck" and "alwaystrue". They # are tried in order, you can specify more than one, separated by spaces. # # Do note that, since sasl will be run as user cyrus, you may have a lot of # trouble to set this up right. sasl_pwcheck_method: auxprop # What auxpropd plugins to load, if using sasl_pwcheck_method: auxprop # by default, all plugins are tried (which is probably NOT what you want). #sasl_auxprop_plugin: sasldb # If enabled, the SASL library will automatically create authentication secrets # when given a plaintext password. Refer to SASL documentation sasl_auto_transition: no # # SSL/TLS Options # # File containing the global certificate used for ALL services (imap, pop3, # lmtp, sieve) #tls_cert_file: /etc/ssl/certs/cyrus-global.pem # File containing the private key belonging to the global server certificate. #tls_key_file: /etc/ssl/private/cyrus-global.key # File containing the certificate used for imap. If not specified, the global # certificate is used. A value of "disabled" will disable SSL/TLS for imap. #tls_imap_cert_file: /etc/ssl/certs/cyrus-imap.pem # File containing the private key belonging to the imap-specific server # certificate. If not specified, the global private key is used. A value of # "disabled" will disable SSL/TLS for imap. #tls_imap_key_file: /etc/ssl/private/cyrus-imap.key # File containing the certificate used for pop3. If not specified, the global # certificate is used. A value of "disabled" will disable SSL/TLS for pop3. #tls_pop3_cert_file: /etc/ssl/certs/cyrus-pop3.pem # File containing the private key belonging to the pop3-specific server # certificate. If not specified, the global private key is used. A value of # "disabled" will disable SSL/TLS for pop3. #tls_pop3_key_file: /etc/ssl/private/cyrus-pop3.key # File containing the certificate used for lmtp. If not specified, the global # certificate is used. A value of "disabled" will disable SSL/TLS for lmtp. #tls_lmtp_cert_file: /etc/ssl/certs/cyrus-lmtp.pem # File containing the private key belonging to the lmtp-specific server # certificate. If not specified, the global private key is used. A value of # "disabled" will disable SSL/TLS for lmtp. #tls_lmtp_key_file: /etc/ssl/private/cyrus-lmtp.key # File containing the certificate used for sieve. If not specified, the global # certificate is used. A value of "disabled" will disable SSL/TLS for sieve. #tls_sieve_cert_file: /etc/ssl/certs/cyrus-sieve.pem # File containing the private key belonging to the sieve-specific server # certificate. If not specified, the global private key is used. A value of # "disabled" will disable SSL/TLS for sieve. #tls_sieve_key_file: /etc/ssl/private/cyrus-sieve.key # File containing one or more Certificate Authority (CA) certificates. #tls_ca_file: /etc/ssl/certs/cyrus-imapd-ca.pem # Path to directory with certificates of CAs. tls_ca_path: /etc/ssl/certs # The length of time (in minutes) that a TLS session will be cached for later # reuse. The maximum value is 1440 (24 hours), the default. A value of 0 will # disable session caching. tls_session_timeout: 1440 # The list of SSL/TLS ciphers to allow, in decreasing order of precedence. # The format of the string is described in ciphers(1). The Debian default # selects TLSv1 high-security ciphers only, and removes all anonymous ciphers # from the list (because they provide no defense against man-in-the-middle # attacks). It also orders the list so that stronger ciphers come first. tls_cipher_list: TLSv1+HIGH:!aNULL:@STRENGTH # Require a client certificate for ALL services (imap, pop3, lmtp, sieve). #tls_require_cert: false # Require a client certificate for imap ONLY. #tls_imap_require_cert: false # Require a client certificate for pop3 ONLY. #tls_pop3_require_cert: false # Require a client certificate for lmtp ONLY. #tls_lmtp_require_cert: false # Require a client certificate for sieve ONLY. #tls_sieve_require_cert: false # # Cyrus Murder cluster configuration # # Set the following options to the values needed for this server to # autenticate against the mupdate master server: # mupdate_server # mupdate_port # mupdate_username # mupdate_authname # mupdate_realm # mupdate_password # mupdate_retry_delay ## ## KEEP THESE IN SYNC WITH cyrus.conf ## # Unix domain socket that lmtpd listens on. lmtpsocket: /var/run/cyrus/socket/lmtp # Unix domain socket that idled listens on. idlesocket: /var/run/cyrus/socket/idle # Unix domain socket that the new mail notification daemon listens on. notifysocket: /var/run/cyrus/socket/notify # Syslog prefix. Defaults to cyrus (so logging is done as cyrus/imap etc.) syslog_prefix: cyrus ## ## DEBUGGING ## # Debugging hook. See /usr/share/doc/cyrus-common-2.2/README.Debian.debug # Keep the hook disabled when it is not in use # # gdb Back-traces #debug_command: /usr/bin/gdb -batch -cd=/tmp -x /usr/lib/cyrus/get-backtrace.gdb /usr/lib/cyrus/bin/%s %d >/tmp/gdb-backtrace.cyrus.%1$s.%2$d <&- 2>&1 & # # system-call traces #debug_command: /usr/bin/strace -tt -o /tmp/strace.cyrus.%s.%d -p %2$d <&- 2>&1 & # # library traces #debug_command: /usr/bin/ltrace -tt -n 2 -o /tmp/ltrace.cyrus.%s.%d -p %2$d <&- 2>&1 & ---- Cyrus Home Page: http://asg.web.cmu.edu/cyrus Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html
