> > Hi Ken, > > Sorry to be ambiguous, but I did a little too much previous editing. > > Ok, > > I have previously set local6.debug to /var/log/imapd.log and nothing > appears > there !, I am guessing the debug has been turned off when compiled. As the file /usr/share/doc/cyrus-imapd-[yourversion]/README.RPM clearly states my rpms are using mail facility for logging. Try increasing verbosity on the mail log facility and it should work. Simon > > The config I have been using for quite some time (couple of cyrus upgrades > to 2.2.12) is as follows. > > I set unixhierarchysep=no > The setup uses pam to use winbind that binds to a win2003 server. > I have a user jbasile and I deliver mail to jbasile.inbox using an alias. > All of the imap authentication works great, sieve is another matter and > probably another forum. > All users use either outlook and squirrelmail depending on their > locations. > All of this works great on 2.2.12, note that this particular imap server > hosts 50+ (and growing) users over 5 locations. > The reason that I need 2.3.3 is that I want to do is sync to another > couple > of servers for site redundancy and distributed mail server access. > > Using the same config files on both versions produces different results. > > ---------------------------------------- > Here is the 2.2.12 that works > > # telnet 127.0.0.1 lmtp > Trying 127.0.0.1... > Connected to localhost.localdomain (127.0.0.1). > Escape character is '^]'. > 220 merald LMTP Cyrus v2.2.12-Invoca-RPM-2.2.12-1.1.fc3 ready > lhlo qw.com > 250-merald > 250-8BITMIME > 250-ENHANCEDSTATUSCODES > 250-PIPELINING > 250-SIZE > 250-AUTH EXTERNAL > 250 IGNOREQUOTA > mail from:<my@xxxxxx> > 250 2.1.0 ok > rcpt to:<jbasile.inbox> > 250 2.1.5 ok > data > 354 go ahead > . > 250 2.1.5 Ok > quit > 221 2.0.0 bye > Connection closed by foreign host. > > ---------------------------------------- > Here is the 2.3.3-1 > > # telnet 127.0.0.1 lmtp > Trying 127.0.0.1... > Connected to localhost.localdomain (127.0.0.1). > Escape character is '^]'. > 220 merald LMTP Cyrus v2.3.3-Invoca-RPM-2.3.3-1 ready > lhlo qw.com > 250-merald > 250-8BITMIME > 250-ENHANCEDSTATUSCODES > 250-PIPELINING > 250-SIZE > 250-AUTH EXTERNAL > 250 IGNOREQUOTA > mail from:<my@xxxxxx> > 250 2.1.0 ok > rcpt to:<jbasile.inbox> > 250 2.1.5 ok > data > 354 go ahead > . > 554 5.0.0 Unexpected internal error > quit > 221 2.0.0 bye > Connection closed by foreign host. > ---------------------------------------- > > I hope that this make more sense > Thanks > John > > > > > > > -----Original Message----- > From: Ken Murchison [mailto:murch@xxxxxxxxxxxxxx] > Sent: Tuesday, 11 April 2006 11:12 PM > To: John Basile > Cc: info-cyrus@xxxxxxxxxxxxxxxxxxxx > Subject: Re: Cannot deliver mail with 2.3.3-1 returns "Unexpected internal > error" > > John Basile wrote: >> Hi Ken >> >> Not much, is there a way of increasing verbosity in the maillog ?. > > You can set the logging level to local6.debug in syslog.conf. > > Looking at the log and telnet session, I have a few questions: > > >> >> Apr 10 20:33:44 meral lmtp[3248]: accepted connection Apr 10 20:33:44 >> meral lmtp[3248]: connection from localhost.localdomain [127.0.0.1] >> preauth'd as postman Apr 10 20:34:22 meral lmtp[3248]: IOERROR: >> fstating sieve script >> /var/lib/imap/sieve/j/jbasile.inbox/defaultbc: No such file or >> directory > > Do you have a user named 'jbasile.inbox'? The only way this could happen > is > if you have enabled unixhierarchysep and created a user/jbasile.inbox > mailbox. > > >> Apr 10 20:36:52 meral master[3220]: process 3248 exited, status 0 >> >> I get the IOERROR when the "Unexpected internal error" happens, but I >> have always assumed its unrelated and just notifing about the missing >> sieve script ? >> >> Thanks >> John >> >> >> >> -----Original Message----- >> From: Ken Murchison [mailto:murch@xxxxxxxxxxxxxx] >> Sent: Sunday, 9 April 2006 11:53 PM >> To: John Basile >> Cc: info-cyrus@xxxxxxxxxxxxxxxxxxxx >> Subject: Re: Cannot deliver mail with 2.3.3-1 returns "Unexpected >> internal error" >> >> John Basile wrote: >>> Deliver appears to have a problem, and returns "Unexpected internal >>> error" I have tried about everything I can think of, and have >>> reverted back to 2.2.12. >>> >>> This is the test via telnet to the lmtp port >>> >>> LHLO qw.qw >>> 250-myserver.com >>> 250-8BITMIME >>> 250-ENHANCEDSTATUSCODES >>> 250-PIPELINING >>> 250-SIZE >>> 250-AUTH EXTERNAL >>> 250 IGNOREQUOTA >>> mail from:<my@xxxxxx> >>> 250 2.1.0 ok >>> rcpt to:<my.inbox> > > Do you have a user named 'my.inbox'? > > > I think you have misconfigured/misunderstand the way Cyrus works. > > >>> 250 2.1.5 ok >>> data >>> 354 go ahead >>> . >>> 554 5.0.0 Unexpected internal error >>> >>> This happens for all users / mailbox's so I all users from the DB and >>> created one for the test it also didn't work, then tried a vanilla >>> install 2.3.3-1 and no go. >>> >>> Some info on extra tracing would be appreciated and any help would be >>> great >> >> What errors are you seeing in the logs? >> >> -- >> Kenneth Murchison >> Project Cyrus Developer/Maintainer >> Carnegie Mellon University >> >> ---- >> Cyrus Home Page: http://asg.web.cmu.edu/cyrus Cyrus Wiki/FAQ: >> http://cyruswiki.andrew.cmu.edu List Archives/Info: >> http://asg.web.cmu.edu/cyrus/mailing-list.html >> > > > -- > Kenneth Murchison > Systems Programmer > Project Cyrus Developer/Maintainer > Carnegie Mellon University > > ---- > Cyrus Home Page: http://asg.web.cmu.edu/cyrus > Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu > List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html > ---- Cyrus Home Page: http://asg.web.cmu.edu/cyrus Cyrus Wiki/FAQ: http://cyruswiki.andrew.cmu.edu List Archives/Info: http://asg.web.cmu.edu/cyrus/mailing-list.html
