> - 'Basic Requirements for IPv6 Customer Edge Routers' > <draft-ietf-v6ops-6204bis-09.txt> as Informational RFC this document persists in confusing routing and forwarding. there are no routing protocols, a la 1812, here. there is confused text such as 4.1. General Requirements The IPv6 CE router is responsible for implementing IPv6 routing; that is, the IPv6 CE router must look up the IPv6 destination address in its routing table to decide to which interface it should send the packet. which i thought was forwarding, not routing. RA/RD doeth not a router make. randy