Thanks, Glen! Can we see (at least) a couple of more hands from people willing to participate in the editing of this document?
Dan
-----Original Message-----
From: Glen Zorn [mailto:glenzorn@xxxxxxxxx]
Sent: Fri 1/13/2012 5:34 AM
To: Romascanu, Dan (Dan)
Cc: Stephen Farrell; jouni korhonen; jouni.korhonen@xxxxxxx; lionel.morand@xxxxxxxxxxxxxxxxxx; dime@xxxxxxxx; IETF-Discussion; iesg@xxxxxxxx
Subject: Re: [Dime] WG Review: Recharter of Diameter Maintenance and Extensions (dime)
On 1/12/2012 7:15 PM, Romascanu, Dan (Dan) wrote:
> Hi,
>
> If a number of hands were raised now and the folks commanding them say
> 'we are ready to work on this NOW' I would support including explicit
> wording in the charter.
Consider my hand raised.
If this does not happen until the telechat next
> week the current text is good enough to allow interested people to start
> working on contributions that can be individual submissions. If these
> submissions are consistent enough the WG can add the milestone later in
> the charter and adopt the submissions as WG items.
>
> Dan
>
>
>
>
>
>> -----Original Message-----
>> From: iesg-bounces@xxxxxxxx [mailto:iesg-bounces@xxxxxxxx] On Behalf
> Of
>> Stephen Farrell
>> Sent: Thursday, January 12, 2012 2:13 PM
>> To: jouni korhonen
>> Cc: jouni.korhonen@xxxxxxx; lionel.morand@xxxxxxxxxxxxxxxxxx;
>> dime@xxxxxxxx; IETF-Discussion; iesg@xxxxxxxx
>> Subject: Re: WG Review: Recharter of Diameter Maintenance and
>> Extensions (dime)
>>
>>
>> Hi Jouni,
>>
>> Right, I'm trying to encourage this - I'm not trying
>> to make it a gating function for the recharter. Its
>> still worth doing though if we can find some victims
>> with enough energy:-)
>>
>> I agree that the current charter text might not need
>> to be modified, OTOH, if there were folks who wanted to
>> do the work, a milestone might be good. I also agree
>> that as of now, that addition is not warranted.
>>
>> Cheers,
>> S
>>
>> On 01/12/2012 12:08 PM, jouni korhonen wrote:
>>>
>>> Stephen,
>>>
>>> This topic raises its head every now and then when a Dime
>>> document arrives at IESG ;) Apart from that there has been
>>> very little serious public discussion about it recently,
>>> for some unknown reason to me. A detail worth pointing out
>>> is that the support for the End-to-End security framework
>>> (E2E-Sequence AVP and 'P'-bit in the AVP header) has been
>>> deprecated in RFC3588bis (now in IESG). So we are "free"
>>> to start from scratch.
>>>
>>> If there is enough serious energy and vision for pursuing
>>> end-to-end security, I do not see current proposed charter
>>> text prohibiting it:
>>>
>>> "- Maintaining and/or progressing, along the standards track, the
>>> Diameter Base protocol and Diameter Applications. This includes
>>> extensions to Diameter Base protocol that can be considered as
>>> enhanced features or bug fixes."
>>>
>>> I would argue the end-to-end security is an enhanced feature for
>>> Diameter base protocol that fixes a serious bug/flaw in security.
>>> On the other hand, if an explicit note is needed about this topic
>>> in the charter, I might hesitate to include such in this round.
>>> I would first like to see some concrete movement& work around
>>> this topic.
>>>
>>> - Jouni
>>>
>>>
>>>
>>> On Jan 11, 2012, at 7:31 PM, Stephen Farrell wrote:
>>>
>>>>
>>>> Hi,
>>>>
>>>> During the IESG internal review of this I asked whether
>>>> or not there was interest in trying to tackle end to
>>>> end security for AVPs. I do know there is at least some
>>>> interest in that but its not clear there's enough to
>>>> warrant including it in the re-charter so I said I'd
>>>> ask when the recharter went out for review...
>>>>
>>>> So - anyone interested in DIME solving that problem?
>>>> (And willing and able to help do the work of course.)
>>>>
>>>> As of now, Diameter really only has hop-by-hop security
>>>> which is ok in many cases but far from ideal (wearing
>>>> my security hat) in some.
>>>>
>>>> Thanks,
>>>> Stephen.
>>>>
>>>> On 01/11/2012 04:37 PM, IESG Secretary wrote:
>>>>> A modified charter has been submitted for the Diameter Maintenance
>> and
>>>>> Extensions (dime) working group in the Operations and Management
>> Area of
>>>>> the IETF. The IESG has not made any determination as yet. The
>> modified
>>>>> charter is provided below for informational purposes only. Please
>> send
>>>>> your comments to the IESG mailing list (iesg@xxxxxxxx) by
>> Wednesday,
>>>>> January 18, 2012.
>>>>>
>>>>> Diameter Maintenance and Extensions (dime)
>>>>> -----------------------------------------
>>>>> Current Status: Active
>>>>>
>>>>> Last Modified: 2012-01-10
>>>>>
>>>>> Chairs:
>>>>> Lionel Morand<lionel.morand@xxxxxxxxxxxxxxxxxx>
>>>>> Jouni Korhonen<jouni.korhonen@xxxxxxx>
>>>>>
>>>>> Operations and Management Area Directors:
>>>>> Dan Romascanu<dromasca@xxxxxxxxx>
>>>>> Ronald Bonica<rbonica@xxxxxxxxxxx>
>>>>>
>>>>> Operations and Management Area Advisor:
>>>>> Dan Romascanu<dromasca@xxxxxxxxx>
>>>>>
>>>>> Mailing Lists:
>>>>> General Discussion: dime@xxxxxxxx
>>>>> To Subscribe:
> https://www.ietf.org/mailman/listinfo/dime
>>>>> Archive:
>>>>> http://www.ietf.org/mail-archive/web/dime/current/maillist.html
>>>>>
>>>>> Description of Working Group:
>>>>>
>>>>> The Diameter Maintenance and Extensions WG will focus on
>> maintenance and
>>>>> extensions to the Diameter protocol required to enable its use for
>>>>> authentication, authorization, accounting, charging in network
>> access,
>>>>> provisioning of configuration information within the network, and
>> for
>>>>> new AAA session management uses within the extensibility rules of
>> the
>>>>> Diameter base protocol.
>>>>>
>>>>> The DIME working group plans to address the following items:
>>>>>
>>>>> - Maintaining and/or progressing, along the standards track, the
>>>>> Diameter Base protocol and Diameter Applications. This includes
>>>>> extensions to Diameter Base protocol that can be considered as
>> enhanced
>>>>> features or bug fixes.
>>>>>
>>>>> - Diameter application design guideline. This document will
> provide
>>>>> guidelines for design of Diameter extensions. It will detail when
>> to
>>>>> consider reusing an existing application and when to develop a new
>>>>> application.
>>>>>
>>>>> - Protocol extensions for the management of Diameter entities.
> This
>> work
>>>>> focuses on the standardization of Management Information Bases
>> (MIBs) to
>>>>> configure Diameter entities (such as the Diameter Base protocol or
>>>>> Diameter Credit Control nodes). The usage of other management
>> protocols
>>>>> for configuring Diameter entities may be future work within the
>> group.
>>>>>
>>>>> - Protocol extensions for bulk and grouped AAA session management.
>> The
>>>>> aim of this work is to study and standardize a solution for
>> handling
>>>>> groups of AAA sessions within the Diameter base protocol context.
>> The
>>>>> solution would define how to identify and handle grouped AAA
>> sessions in
>>>>> commands and operations.
>>>>>
>>>>> Additionally, Diameter-based systems require interoperability in
>> order
>>>>> to work. The working group, along with the AD, will need to
>> evaluate any
>>>>> potential extensions and require verification that the proposed
>>>>> extension is needed, and is within the extensibility rules of
>> Diameter
>>>>> and AAA scope. Coordination with other IETF working groups and
>> other
>>>>> SDOs (e.g. 3GPP) will be used to ensure this.
>>>>>
>>>>> Goals and Milestones:
>>>>>
>>>>> Done - Submit the following two Diameter Mobility documents to
>> the
>>>>> IESG for consideration as a Proposed Standards:*
>> 'Diameter
>>>>> Mobile IPv6: Support for Home Agent to Diameter Server
>>>>> Interaction' * 'Diameter Mobile IPv6: Support for
>> Network
>>>>> Access Server to Diameter Server Interaction'
>>>>> Done - Submit 'Diameter API' to the IESG for consideration as
>> an
>>>>> Informational RFC
>>>>> Done - Submit 'Quality of Service Parameters for Usage with
>>>>> Diameter' to the IESG for consideration as a Proposed
>>>>> Standard.
>>>>> Done - Submit 'Diameter QoS Application' to the IESG for
>>>>> consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter Support for EAP Re-authentication
>>>>> Protocol' as DIME working group item
>>>>> Done - Submit 'Diameter User-Name and Realm Based Request
>> Routing
>>>>> Clarifications' as DIME working group item
>>>>> Done - Submit 'Diameter Proxy Mobile IPv6' as DIME working
>> group
>>>>> item
>>>>> Done - Submit 'Quality of Service Attributes for Diameter' to
>> the
>>>>> IESG for consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter Proxy Mobile IPv6' to the IESG for
>>>>> consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter User-Name and Realm Based Request
>> Routing
>>>>> Clarifications' to the IESG for consideration as a
>> Proposed
>>>>> Standard
>>>>> Done - Submit 'Diameter NAT Control Application' as DIME
>> working
>>>>> group item
>>>>> Done - Submit 'Diameter Capabilities Update' as DIME working
>> group
>>>>> item
>>>>> Done - Submit 'Diameter Credit Control Application MIB' to the
>>>>> IESG for consideration as an Informational RFC
>>>>> Done - Submit 'Diameter Base Protocol MIB' to the IESG for
>>>>> consideration as an Informational RFC
>>>>> Done - Submit 'Diameter Capabilities Update' to the IESG for
>>>>> consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter Extended NAPTR' as DIME working group
>> item
>>>>> Done - Submit 'Realm-Based Redirection In Diameter' as DIME
>>>>> working group item
>>>>> Done - Submit 'Diameter Support for Proxy Mobile IPv6
> Localized
>>>>> Routing' as DIME working group item
>>>>> Done - Submit 'Diameter Attribute-Value Pairs for
> Cryptographic
>>>>> Key Transport' as DIME working group item
>>>>> Done - Submit 'Diameter Priority Attribute Value Pairs' as
> DIME
>>>>> working group item
>>>>> Done - Submit 'Diameter IKEv2 PSK' as DIME working group item
>>>>> Done - Submit Revision of 'Diameter Base Protocol' to the IESG
>> for
>>>>> consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter Attribute-Value Pairs for
> Cryptographic
>>>>> Key Transport' to the IESG for consideration as a
>> Proposed
>>>>> Standard
>>>>> Done - Submit 'Diameter Priority Attribute Value Pairs' to the
>>>>> IESG for consideration as a Proposed Standard
>>>>> Done - Submit Revision of 'Diameter Network Access Server
>>>>> Application - RFC 4005bis' as DIME working group item
>>>>> Done - Submit 'Diameter NAT Control Application' to the IESG
>> for
>>>>> consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter IKEv2 PSK' to the IESG for
>> consideration
>>>>> as a Proposed Standard
>>>>> Done - Submit 'Diameter Extended NAPTR' to the IESG for
>>>>> consideration as a Proposed Standard
>>>>> Done - Submit 'Diameter Support for Proxy Mobile IPv6
> Localized
>>>>> Routing' to the IESG for consideration as a Proposed
>>>>> Mar 2012 - Submit 'Realm-Based Redirection In Diameter' to the
> IESG
>>>>> for consideration as a Proposed Standard
>>>>> Mar 2012 - Submit Revision of 'Diameter Network Access Server
>>>>> Application - RFC 4005bis' to the IESG for
>> consideration as a
>>>>> Proposed Standard
>>>>> May 2012 - Submit 'Diameter Application Design Guidelines' to the
>> IESG
>>>>> for consideration as a BCP document Standard
>>>>> Jul 2012 - Submit 'Diameter Support for EAP Re-authentication
>>>>> Protocol' to the IESG for consideration as a Proposed
>>>>> Standard
>>>>> Aug 2012 - Submit a document on 'Protocol extension for bulk and
>> group
>>>>> signaling' as a working group item
>>>>> Aug 2013 - Submit a document on 'Protocol extension for bulk and
>> group
>>>>> signaling' to the IESG for consideration as a Proposed
>>>>> Standard
>>>>> _______________________________________________
>>>>> IETF-Announce mailing list
>>>>> IETF-Announce@xxxxxxxx
>>>>> https://www.ietf.org/mailman/listinfo/ietf-announce
>>>>>
>>>> _______________________________________________
>>>> Ietf mailing list
>>>> Ietf@xxxxxxxx
>>>> https://www.ietf.org/mailman/listinfo/ietf
>>>
> _______________________________________________
> DiME mailing list
> DiME@xxxxxxxx
> https://www.ietf.org/mailman/listinfo/dime
_______________________________________________ Ietf mailing list Ietf@xxxxxxxx https://www.ietf.org/mailman/listinfo/ietf