Dear Jari, Thank you for your answers. Please see inline. Cheers, Med -----Message d'origine----- De : Jari Arkko [mailto:jari.arkko@xxxxxxxxx] Envoyé : mardi 28 décembre 2010 01:06 À : BOUCADAIR Mohamed NCPI/NAD/TIP Cc : ietf@xxxxxxxx; rbonica@xxxxxxxxxxx; Lindqvist Kurt Erik; draft-arkko-ipv6-transition-guidelines@xxxxxxxxxxxxxx Objet : Re: Last Call: <draft-arkko-ipv6-transition-guidelines-08.txt> (Guidelines for Using IPv6 Transition Mechanisms during IPv6 Deployment) to Informational RFC Mohamed, Thank you for your in-depth review and comments. I have tried to take your comments into account in the -14 version that got just posted. > (1) > > * Precise in the introduction section the type of networks which are > concerned with the IPv6 deployment models listed in the I-D; in > particular mention that both corporate networks and providers networks > are concerned. > > * Fixed and mobile networks may adopt distinct IPv6 deployment > strategies because of the differences between the two networks (e.g., > controlled CPE vs. non controlled handsets). > > * It seems services infrastructures (e.g., VoIP, IP TV) are out of > scope. This should be mentioned. Note that some service-related > discussed is covered in Section 4.4. We certainly did not plan on providing specific guidance to each and every different networking situation. Draft -14 tries to make this clearer. But by the same token, I'm not sure I want to single out the above cases in any particular way either. FWIW I do agree with many of your arguments above. Who controls what is one of the key factors in any deployment decision. Med: The sentence you added is fine. > (2) > > Page 5/6, the I-D says: > > > " o The ability to offer a valuable service. In the case of the > Internet, connectivity has been this service. > > o The ability to deploy the solution in an incremental fashion. > > o Simplicity. This has been a key factor in making it possible for > all types of devices to support the Internet protocols. > > o Openly available implementations. These make it easier for > researchers, start-ups and others to build on or improve existing > components. > > o The ability to scale. The IPv4 Internet grew far larger than its > original designers had anticipated, and scaling limits only became > apparent 20-30 years later. > > o The design supports robust interoperability rather than mere > correctness. This is important in order to ensure that the > solution works in different circumstances and in an imperfectly > controlled world." > > and in Page 6: "These factors are also important when choosing IPv6 > migration tools.", but: > > * The I-D does not show how these factors are applied for the tools > listed in the I-D; a table with a set of criteria would be useful; > > * The first criterion is IMHO meaningless for IPv6 deployment because > IPv6 does not offer a new service compared to IPv4. > > * I'm not sure that having an open source for a given tool can be an > argument to RECOMMEND or NOT a given tool; Well, the document only says "these factors are important". I would argue that they are. Of course, as you point out, situations differ and maybe in some case you decide to deploy something regardless of what some of the factors indicate -- for good reasons. Med: I would personally remove the list of the bullets provided in the I-D; since no definition is provided to what is meant by "simplicity", "scalability", etc. BTW, I would maintain only the new sentence starting from "Success factors...". But, this is up to you of course. > * How "scalability" is defined (5th bullet)?? All the solutions listed > in the I-D need a NAT (l2-nat, ds-lite nat44, nat44, nat64), to what > extent a CGN is considered as a scalable solution? I have added a little bit text to make this part of the document clearer. In general, the document does not attempt to provide a matrix of various factors and benefits. We're listing a certain set of tools mostly because real world networks have used them or are at least giving serious consideration to them. Med: Please see my previous answer. Unless you define what you mean by "scalability", "simplicity", etc. this list is not useful. > > * The last bullet is not clear: Do you consider that DS-Lite satisfies > this factor? FWIW, DS-Lite has been rejected by the 3GPP because it > requires specific functions on the UE. DS-Lite has been rejected in that particular use case because, well, its not needed :-) Med: Oh?! I'm puzzled now with why gi-ds-lite was claimed to be needed ;-). That's fine. 3GPP networks have native ipv6 to 5 billion cellphones literally at the flick of a switch. I don't want to say that its all easy, because there are of course serious problems on many levels, but one thing that 3GPP networks don't need is more tunnels because they already have that covered. Med: FWIW, having an extra tunnel supported at IP level by UEs would be an alternative to optimise PDP context/bearers licensing costs and not wait for v4v6 pdp type (otherwise licensing cost will be doubled), other drawbacks of an extra tunnelling level should be considered also. I agree, this is not the purpose of this I-D; skip it then. Lets have them solve their other problems, like having more terminals that actually support any of this stuff, ensure that user's eyeballs are happy and not stuck in some issue, set up the core networks with proper IPv6 routing, figure out in which situations they can go IPv6-only, etc. Med: Fully agree. But back to this document. The factors that we list are really examples from past Internet deployment, not necessarily something that should be taken into account verbatim. Version -14 makes this clearer. Med: The new sentence is fine with me. > (3) > > From the perspective of transitioning networks to IPv6, I don't see > the rationale behind including techniques such as those listed in > "4.2. Crossing IPv4 Islands" as a candidate solutions for IPv6 > deployment. This section can be removed to an appendix. Well, we could argue the philosophy behind this. Is tunneling something that moves things forward, or are we confessing our inability to change the part in between? But again we've chosen to include techniques that have seen world-wide deployment, and most things in Section 4.2 certainly fall in that category. If I talk to someone about their IPv6 deployment plans, techniques in this section are often needed. I think we need to keep the section, even if I agree with you that the ultimate goal should be native deployment. Med: Please keep in mind that in all our internal organisations you will find someone who will refer to this section of your document, and we have to argue again, again and again why native deployment is preferable, etc. In general, people do not care about the RFC track (informational or standard). If you don't agree to move this text to an appendix can you please add a statement about the ultimate goal, etc, so that to make things clearer? This would be helpful. > > (4) > > (a) I have an issue with the following statements in the I-D: > > On page 6, the ID states: "The third scenario is more advanced and > looks at a service provider network that runs only on IPv6 but which > is still capable of providing both IPv6 and IPv4 services." > > and in page 11, the ID mentions: > > " The recommended tool for this model is Dual Stack Lite > [I-D.ietf-softwire-dual-stack-lite > <http://tools.ietf.org/html/draft-arkko-ipv6-transition-guidelines-13#ref-I-D.ietf-softwire-dual-stack-lite>]. > Dual Stack Lite provides both > relief for IPv4 address shortage and makes forward progress on IPv6 > deployment, by moving service provider networks and IPv4 traffic over > IPv6. Given this IPv6 connectivity, as a side-effect it becomes easy > to provide IPv6 connectivity all the way to the end users." > > Taking into account the current DS-Lite specification, this > recommendation is not justified for the following reasons: > > * For Ds-Lite technique to be deployed in a IPv6-only realm, and as > currently specified in DS-Lite specification, this would mean that > DS-Lite AFTR(s) are to be located at the boundaries of the IPv6-only > domain. > > * This design choice would lead to non optimal intra-domain paths to > place communications between two DS-Lite serviced customers. > > * This centralised model is not suitable for service providers who > want to deploy DS-Lite AFTRs closer to the customers. You may be right, but I don't we're trying to provide perfectly optimized solution. These are transition tools. Also, DS-Lite is one of the tools in the small set of IETF-developed transition tools. We've had fairly large set of people interested in it. Not everyone, of course, and we already talked about the cellular case above. But I'm trying to convey the IETF and industry opinion about the transition tools. I don't think I can suggest other types of solutions. Med: FYI, DS-Lite is our recommendation to rationale the use of IPv4 address for our fixed networks. That's said, my concern is more about the technical accuracy of what is stated in that section and not against ds-lite. Deploying DS-Lite AFTR in a IPv6 core domain has several implications and drawbacks (see the list above); IMHO this should be mentioned in the text for fairness. > > (b) The I-D states in page 11: "Given this IPv6 connectivity, as a > side-effect it becomes easy to provide IPv6 connectivity all the way > to the end users." > > This wording is not accurate; IPv6 connectivity is not a side-effect > of DS-lite but rather a pre-requisite for DS-Lite (e.g., DHCPv6 is > required to configure for instance the AFTR NAME option, dual-stack > CPE, etc.). Right. Thanks for the report. I have fixed this in -14. Med: Thanks, the new text is better. > > (5) > > * In Section "4.4. IPv6-only Deployment", add a sentence > to precise that the issues listed > in [I-D.ietf-intarea-shared-addressing-issues > <http://tools.ietf.org/html/draft-arkko-ipv6-transition-guidelines-13#ref-I-D.ietf-intarea-shared-addressing-issues>] > are still valid when NAT64 is deployed. OK > > * Page 13, change "SIP (Session Identity Protocol)" to "SIP (Session > Initiation Protocol)"; Right. I don't know what I was thinking :-) Med: :-) > > * Page 13: "One might position a web proxy, a > mail server, or a SIP (Session Identity Protocol) back-to-back user > agent across the boundary between IPv4 and IPv6 domains, so that the > application terminates IPv4 sessions on one side and IPv6 sessions on > the other. Doing this preserves the end-to-end nature of > communications between gateways. For obvious reasons, this solution > is preferable to the implementation of Application Layer Gateways in > network layer translators. > " > > (a) Why only listing the back-to-back user agent option (this option > is valid)? Why not deploying means for NAT traversal is not listed as > an alternative? In this part of the text we are talking about deploying a proxy of some sort. Later in the same section we talk about network address translators. The latter obviously may benefit from a NAT traversal solution. But I'm not sure I understand why NAT traversal alone would be a solution. You have something that converts packets in the network. The document talks about L3 version of that, as well as L4-L7 gateways. Med: I'm not suggesting to list only nat traversal techniques but my question is why listing the b2bua approach only? Several solutions can be envisaged at the application level. Having this discussion in this section is unbalanced compared to other section anyway. > > (b) "Doing this preserves the end-to-end nature of communications > between gateways": Which gateways? Imprecise text. The idea is that the communication from the gateway to the peer (which might be another gateway) is end-to-end. I have changed the text. Med: Thanks > > (c) For the SIP case, still there is a need for a translator for media > flows; Yes. > > (d) Service-related discussions are not elaborated in other sections: > I would prefer to have a similar discussion for the DS model, in > particular issues in SIP environments to signal both IPv4 and IPv6 > addresses in the SDP offers; means to prioritise the use of IPv6; how > the SIP Proxy Server can determine whether there is a need to invoke a > SIP ALG/NAT64/NAT46 (e.g.., translator should be avoided when a DS UA > calls a IPvx-only/DS UA. ALG/NAT46/NAT64 should be invoked only for > IPvx-IPvy sessions), etc. These would be useful. If you have text, please submit it. Med: below a text proposal: " The IPv4-IPv6 co-existence introduces heterogeneous scenarios with combinations of IPv4 and IPv6 nodes some of which are capable of supporting both IPv4 and IPv6, and dual-stack. Some of user agents are capable of supporting only IPv4 or only IPv6. moreover, some dual-stack UAs are unable to use both interfaces natively at the same time which can mean for example that if a UA has to use IPv6 for signaling it cannot use IPv4 for media even though the UA supports an IPv4 stack (e.g., mobile context). In order to encourage the use of native IPv6 and avoid invoking SIP ALG/IPv4-IPv6 NAT, SIP Proxy Servers should be aware of the type of the involved user agents before forwarding session establishment requests. Otherwise, SIP Proxy Servers have no way to optimise the invocation of IPv4-IPv6 adaptation functions (e.g. SIP ALG and IPv4-IPv6 NAT) and therefore to encourage the use of IPv6 to place SIP communications. In addition, dual-stack UAs should be able to include both IPv4 and IPv6 addresses in their SDP offers; with a higher priority assigned to the enclosed IPv6 address." > > * Add a reference to > http://tools.ietf.org/html/draft-ietf-v6ops-v6-in-mobile-networks-02 > Ack > (6) > > It would be valuable if the I-D describes some migration paths and > examples about the use of the tools listed in the I-D; e.g.,: > > * How DS-Lite CGN devices can be removed from the network since it is > supposed to be a transition solution. This would be a good example to > apply what is stated in the I-D in page 5: "The end goal is > network-wide native IPv6 deployment, resulting in the > obsolescence of transitional mechanisms based on encapsulation, > tunnels, or translation, and also resulting in the obsolescence of > IPv4." We don't have a lot of running code about that yet. Again, do you have suggested words? Med: what about something like: " Service providers need to investigate appropriate means to remove CGN (NAT44) devices from their networks and to extend the scope of IPv6- enabled portion of the network. Various IPv4 address sharing schemes may be activated in the network (e.g. DS-Lite NAT44 and NAT64); means and triggers to offload NAT44 to NAT64 may be considered whenever appropriate to help for reducing maintaining several IPv4 address sharing tools." FWIW, I attach a figure showing an example of the removal of the CGN. > > * How to encourage the use of native IPv6 transfer capabilities: > address selection issues, application considerations, etc. This too would be useful. (Text?) FWIW I think we might need another document or even a set of documents for this particular issue. Some of this is in the happy eyeballs doc though. Jari > > Cheers, > Med > ********************************* > This message and any attachments (the "message") are confidential and intended solely for the addressees. > Any unauthorised use or dissemination is prohibited. > Messages are susceptible to alteration. > France Telecom Group shall not be liable for the message if altered, changed or falsified. > If you are not the intended addressee of this message, please cancel it immediately and inform the sender. > ******************************** > ********************************* This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ********************************
Attachment:
DS_lite-migration paths.png
Description: DS_lite-migration paths.png
_______________________________________________ Ietf mailing list Ietf@xxxxxxxx https://www.ietf.org/mailman/listinfo/ietf