Re: Review of draft-saintandre-tls-server-id-check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For clarity, I'll provide two examples where I think it is motivated to
obtain the FQDN reference identifier in an automated fashion and not through
direct user input or configuration (contrary to section 5.1).

1) Obtaining EU Trusted Lists
EU has standardized on XML based lists over national Trust Service Providers
and their certificates. Each country in the EU publish their own list.
The EU commission provides a central list with all the URLs to each national
list.

The first step is for the client to establish a secure connection with the
EU commission and download the EU list. This is done by configuration.

The second step is to automatically obtain reference identifiers for all
national lists from the EU list.


2) Redirects from a trusted service.
If I connect to a trusted service and then get redirected to another host,
it can be reasonable to obtain the reference identifier from the rediricet.
Typical application I can think of is a redirect to a SAML IdP or a SAML
Discovery service.

/Stefan


On 10-09-08 4:21 PM, "Stefan Santesson" <stefan@xxxxxxxxxxx> wrote:

> My apology,
> 
> I just realized that the document defines "source domain" as what I thought
> would be the "target domain"
> 
>    source domain:  The fully-qualified DNS domain name that a client
>       expects an application service to present in the certificate.
> 
> Which makes my comments below a bit wrong.
> 
> I think it would be better to discuss this in terms of "reference identifier"
> and "presented Identifier".
> 
>    presented identifier:  An identifier that is presented by a server to
>       a client within the server's PKIX certificate when the client
>       attempts to establish a secure connection with the server; the
>       certificate can include one or more presented identifiers of
>       different types.
> 
>    reference identifier:  An identifier that is used by the client for
>       matching purposes when checking the presented identifiers; the
>       client can attempt to match multiple reference identifiers of
>       different types.
> 
> I see no problem in obtaining the reference identifier from a DNS lookup an
> the comparing it with a presented identifier in the certificate.
> 
> Why would you require the reference identity to be provided by a human user?
> 
> /Stefan
> 
> 
> 
> On 10-09-08 3:40 PM, "Stefan Santesson" <stefan@xxxxxxxxxxx> wrote:
> 
>> Being the author of RFC 4985 I agree with most of you say here.
>> 
>> Comments in line;
>> 
>> On 10-09-06 8:48 PM, "Bernard Aboba" <bernard_aboba@xxxxxxxxxxx> wrote:
>> 
>>> That was in fact my original question.
>>> 
>>> Section 5.1 states that the source domain and service type MUST be
>>> provided by a human user, and can't be derived.  Yet in an SRV or
>>> DDDS lookup, it is not the source domain that is derived, it is the
>>> target domain.  Given that, it's not clear to me what types of DNS
>>> resolutions are to be discouraged.
>>> 
>> 
>> This puzzled me as well. The domain of interest is the domain where the
>> requested service is located = target domain.
>> 
>>> As noted elsewhere, RFC 4985 appears to require matching of the
>>> source domain/service type to the SRV-ID in the certificate.
>> 
>> It is not. RFC 4985 says the following in section 2:
>> 
>>       _Service.Name
>> 
>> <snip>
>> 
>>       Name
>>          The DNS domain name of the domain where the specified service
>>          is located.
>> 
>> 
>>>  Such
>>> a process would be consistent with a match between user inputs
>>> (the source domain and service type) and the presented identifier
>>> (the SRV-ID).  
>>> 
>> 
>> Since this is not the definition of SRVName, this type of matching does not
>> apply.
>> 
>>> 
>>>> Yet, Section 5.1 states:
>>>> 
>>>> When the connecting application is an interactive client, the source
>>>>    domain name and service type MUST be provided by a human user (e.g.
>>>>    when specifying the server portion of the user's account name on the
>>>>    server or when explicitly configuring the client to connect to a
>>>>    particular host or URI as in [SIP-LOC]) and MUST NOT be derived from
>>>>    the user inputs in an automated fashion (e.g., a host name or domain
>>>>    name discovered through DNS resolution of the source domain).  This
>>>>    rule is important because only a match between the user inputs (in
>>>>    the form of a reference identifier) and a presented identifier
>>>>    enables the client to be sure that the certificate can legitimately
>>>>    be used to secure the connection.
>>>> 
>>>>    However, an interactive client MAY provide a configuration setting
>>>>    that enables a human user to explicitly specify a particular host
>>>>    name or domain name (called a "target domain") to be checked for
>>>>    connection purposes.
>>>> 
>>>> [TP] what I thought was about to be raised here was a contradiction that
>>>> RFC4985
>>>> is all about information gotten from a DNS retrieval whereas the wording of
>>>> s5.1
>>>> in this I-D
>>>> 
>>>> "the source
>>>>    domain name and service type  ...  MUST NOT be derived from
>>>>    the user inputs in an automated fashion (e.g., ... discovered through
>>>> DNS
>>>> resolution ... "
>>>> 
>>>> would appear to exclude DNS resolution.  If DNS resolution is off limits,
>>>> then
>>>> RFC4985 would appear not to apply.
>>>> 
>> 
>> RFC 4985 provides the client with a way to authenticate a host that it
>> believes is authorized to provide a specific service in the target domain.
>> 
>> It does not matter from where the client has obtained that authorization
>> information or whether that information is trustworthy.
>> 
>> A client may very well do an insecure DNS lookup to discover what host is
>> providing the requested service. The client would then contact that host and
>> obtained it's certificate. If the certificate is trusted and it's SRVName
>> matches the information provided from the DNS server, then everything is
>> fine.
>> 
>> The client now has assurance from the CA that this host is in fact authorized
>> to provide this service.
>> 
>> 
>> /Stefan
>> 


_______________________________________________
Ietf mailing list
Ietf@xxxxxxxx
https://www.ietf.org/mailman/listinfo/ietf


[Index of Archives]     [IETF Annoucements]     [IETF]     [IP Storage]     [Yosemite News]     [Linux SCTP]     [Linux Newbies]     [Fedora Users]