On Mon, Apr 26, 2010 at 12:45:55AM -0500, Jerone Young wrote:
> On Tue, 2010-04-20 at 23:03 +0200, Jens Taprogge wrote:
> > TP_HKEY_EV_VOL_MUTE = 0x1017, /* Mixer output mute */
> > + TP_HKEY_EV_VOL_MUTE_MIC = 0x101b, /* Microphone mute */
>
> One thing I've been thinking about is getting a standard key defined for
> microphone mute in linux/input.h as well.
That might make a lot of sense. We also might try to mute unmute the
microphone in the driver depending on whether there is a way to do that through
APCI. Do you have any insight into that? The regular Mute/Volume down/Volume
up buttons do not seem to be handled through ACPI anymore, so there might not be.
> > +
> > + TPACPI_Q_LNV('6', 'U', 0x4087), /* T410s */
>
> Where did you get the values for id1 & id2? I ask as want to add it as a
> useful led on the regular T410 .. which apparently doesn't have all the
> exact same values here.
The values are the first two letters of the BIOS id. It is printed during
module load as "Thinkpad BIOS 6Uxxxxxx ..." .
Best Regards
Jens
------------------------------------------------------------------------------
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
