On Mon, 2007-07-30 at 00:27 +0200, Raphael wrote: > I have also a z61t and I did raise a support request to lenovo, will > see, > > still, I was a bit puzzled, so did a few tests, on mine (with an > earlier version of firmware), > when in auto mode and full load: > - default speed is ~2800rpm (level 4) > - fan speed increases to ~3500rpm (level 7) at 92deg, > - then goes back to level 4 at 86-87deg. > - did not see it go back to level 2, even when below 40deg, > > I wonder if this is a normal behaviour though, To get it up to ~5400 rpm (if you are uncomfortable with high temps like me e.g. keyboard rest pad heats up) you should go with "level disengaged". It's the only way I've seen so far to get the fan blowing at full speed and bringing it down from the mid/upper 80's. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ ibm-acpi-devel mailing list ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
