Re: Improved fxload [Was: Re: fxload devpath]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you.  I'll try this out in the next day or so.

On Sun, Oct 11, 2015 at 11:45 PM, Wojciech A. Koszek
<wojciech@xxxxxxxxxx> wrote:
> Hello,
>
> In May 2010 I've fixed fxload by adding LibUSB support.
>
> After seeing Carl's e-mail I dug out a patches from backup, and made a repo
> out of it:
>
> https://github.com/wkoszek/fxload
>
> So basically fxload would gain LibUSB support and much easier usage, since
> the paths which fxload requires right now change for some devices doing
> re-enumeration.
>
> Back then I failed to get any replies. Retrying now in hope we could get
> these fixes into mainline.
>
> Thanks,
>
> Wojciech
>
> On 10/11/15 8:23 PM, Andrei Borzenkov wrote:
>>
>> 12.10.2015 01:29, Carl Karsten пишет:
>>>
>>> man fxload - Firmware download to EZ-USB devices
>>>
>>> fxload  [  -v  ]  [ -l ] [ -D devpath ] ...
>>>
>>>         -D devpath
>>>                Specifies the "usbfs" path name for the device in
>>> question, such
>>>                as /proc/bus/usb/004/080.  This takes precedence over any
>>> DEVICE
>>>                environment variable that may be set.
>>>
>>> How do I figure out what the devpath is for the device I plugged in?
>>>
>>> or.. how do I know what devnum will get assigned?
>>>
>>> The device(s) I am working with:
>>>
>>> juser@dc10b:~$ lsusb -s 2:9; lsusb -s 2:10
>>> Bus 002 Device 009: ID 04e2:1410 Exar Corp.
>>> Bus 002 Device 010: ID 1443:0007 Digilent Development board JTAG
>>>
>>
>> Should be /dev/bus/usb/002/010 etc.
>>
>>> Ubuntu trusty lts
>>> Linux dc10b 3.13.0-65-generic #106-Ubuntu SMP Fri Oct 2 22:08:27 UTC
>>> 2015 x86_64 x86_64 x86_64 GNU/Linux
>>>
>>> --
>>> Carl K
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-hotplug"
>>> in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-hotplug"
>> in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>



-- 
Carl K
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux DVB]     [Asterisk Internet PBX]     [DCCP]     [Netdev]     [X.org]     [Util Linux NG]     [Fedora Women]     [ALSA Devel]     [Linux USB]

  Powered by Linux