Re: synaptics: PS/2 touchpad isn't detected if a keyboard key is held down on boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is my dmesg. At boot 'H' key was held down.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-rc3-ARCH-dirty (o2genum@o2pc) (gcc version 4.8.2 (GCC) ) #10 SMP PREEMPT Sat Dec 7 20:25:41 MSK 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-mainline i8042.debug=1 root=UUID=747f676b-e21a-443a-ac61-3f6c4aebb73d rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b680fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b681000-0x000000007b6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b6bf000-0x000000007b757fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b758000-0x000000007b7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007b7bf000-0x000000007b7e2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b7e3000-0x000000007b7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007b7ff000-0x000000007b7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b800000-0x000000007bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 20035                           /Base Board Product Name, BIOS 1ECN33WW(V5.07) 03/17/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07B800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[    0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[    0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7b400000-0x7b5fffff]
[    0.000000]  [mem 0x7b400000-0x7b5fffff] page 2M
[    0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x78000000-0x7b3fffff]
[    0.000000]  [mem 0x78000000-0x7b3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x77ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7b600000-0x7b680fff]
[    0.000000]  [mem 0x7b600000-0x7b680fff] page 4k
[    0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7b6bf000-0x7b757fff]
[    0.000000]  [mem 0x7b6bf000-0x7b757fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7b7bf000-0x7b7e2fff]
[    0.000000]  [mem 0x7b7bf000-0x7b7e2fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7b7ff000-0x7b7fffff]
[    0.000000]  [mem 0x7b7ff000-0x7b7fffff] page 4k
[    0.000000] RAMDISK: [mem 0x378d4000-0x37c61fff]
[    0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 000000007b7fe120 000084 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 000000007b7fc000 0000F4 (v04 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000007b7ef000 00992C (v02 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 000000007b76a000 000040
[    0.000000] ACPI: ASF! 000000007b7fd000 0000A5 (v32 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 000000007b7fb000 000038 (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 000000007b7fa000 00008C (v02 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000007b7f9000 00003C (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: SLIX 000000007b7ee000 000176 (v01 LENOVO CB-01    00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 000000007b7eb000 000028 (v01 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 000000007b7e7000 000034 (v04 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: WDRT 000000007b7e6000 000047 (v01 INTEL  Calpella 00000000 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007b7e5000 0009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000007b7e4000 000259 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000007b7e3000 00049F (v01  PmRef    ApTst 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007b7fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7b7fffff]
[    0.000000]   NODE_DATA [mem 0x7b7de000-0x7b7e2fff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880078e00000-ffff88007adfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x7b680fff]
[    0.000000]   node   0: [mem 0x7b6bf000-0x7b757fff]
[    0.000000]   node   0: [mem 0x7b7bf000-0x7b7e2fff]
[    0.000000]   node   0: [mem 0x7b7ff000-0x7b7fffff]
[    0.000000] On node 0 totalpages: 505563
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7840 pages used for memmap
[    0.000000]   DMA32 zone: 501567 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b681000-0x7b6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b758000-0x7b7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b7e3000-0x7b7fefff]
[    0.000000] e820: [mem 0x7c000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007b400000 s86272 r8192 d24320 u262144
[    0.000000] pcpu-alloc: s86272 r8192 d24320 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 497638
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-mainline i8042.debug=1 root=UUID=747f676b-e21a-443a-ac61-3f6c4aebb73d rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1973032K/2022252K available (5151K kernel code, 815K rwdata, 1728K rodata, 1160K init, 1304K bss, 49220K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:8448 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2127.841 MHz processor
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.00 BogoMIPS (lpj=7092803)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000040] Security Framework initialized
[    0.000052] AppArmor: AppArmor disabled by boot time parameter
[    0.000053] Yama: becoming mindful.
[    0.000227] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000932] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001223] Mount-cache hash table entries: 256
[    0.001448] Initializing cgroup subsys memory
[    0.001456] Initializing cgroup subsys devices
[    0.001459] Initializing cgroup subsys freezer
[    0.001461] Initializing cgroup subsys net_cls
[    0.001462] Initializing cgroup subsys blkio
[    0.001486] CPU: Physical Processor ID: 0
[    0.001488] CPU: Processor Core ID: 0
[    0.001494] mce: CPU supports 9 MCE banks
[    0.001505] CPU0: Thermal monitoring enabled (TM1)
[    0.001516] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.001606] Freeing SMP alternatives memory: 20K (ffffffff819ef000 - ffffffff819f4000)
[    0.002796] ACPI: Core revision 20131115
[    0.012879] ACPI: All ACPI Tables successfully acquired
[    0.179442] ftrace: allocating 20458 entries in 80 pages
[    0.191816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.224806] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz (fam: 06, model: 25, stepping: 02)
[    0.330332] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.330340] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.330343] ... version:                3
[    0.330344] ... bit width:              48
[    0.330345] ... generic registers:      4
[    0.330346] ... value mask:             0000ffffffffffff
[    0.330347] ... max period:             000000007fffffff
[    0.330348] ... fixed-purpose events:   3
[    0.330349] ... event mask:             000000070000000f
[    0.357070] x86: Booting SMP configuration:
[    0.370446] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.357072] .... node  #0, CPUs:      #1 #2 #3
[    0.410323] x86: Booted up 1 node, 4 CPUs
[    0.410328] smpboot: Total of 4 processors activated (17029.00 BogoMIPS)
[    0.412942] devtmpfs: initialized
[    0.416343] PM: Registering ACPI NVS region [mem 0x7b758000-0x7b7befff] (421888 bytes)
[    0.417415] RTC time: 16:39:27, date: 12/07/13
[    0.417460] NET: Registered protocol family 16
[    0.417574] cpuidle: using governor ladder
[    0.417576] cpuidle: using governor menu
[    0.417592] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.417594] ACPI: bus type PCI registered
[    0.417596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.417675] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.417678] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.438612] PCI: Using configuration type 1 for base access
[    0.438752] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.438753] mtrr: probably your BIOS does not setup all CPUs.
[    0.438754] mtrr: corrected configuration.
[    0.439244] bio: create slab <bio-0> at 0
[    0.439371] ACPI: Added _OSI(Module Device)
[    0.439374] ACPI: Added _OSI(Processor Device)
[    0.439375] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.439377] ACPI: Added _OSI(Processor Aggregator Device)
[    0.443160] ACPI: Executed 1 blocks of module-level executable AML code
[    0.470309] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.470733] ACPI: SSDT 000000007b691c18 0003A0 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.471190] ACPI: Dynamic OEM Table Load:
[    0.471192] ACPI: SSDT           (null) 0003A0 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.471342] ACPI: SSDT 000000007b68f618 0005CD (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.471783] ACPI: Dynamic OEM Table Load:
[    0.471785] ACPI: SSDT           (null) 0005CD (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.497221] ACPI: SSDT 000000007b690a98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.497727] ACPI: Dynamic OEM Table Load:
[    0.497729] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.510396] ACPI: SSDT 000000007b68ed98 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.510866] ACPI: Dynamic OEM Table Load:
[    0.510868] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.535990] ACPI: Interpreter enabled
[    0.536002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.536009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.536033] ACPI: (supports S0 S3 S4 S5)
[    0.536035] ACPI: Using IOAPIC for interrupt routing
[    0.536076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.536263] ACPI: No dock devices found.
[    0.621788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.621795] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.621831] \_SB_.PCI0:_OSC invalid UUID
[    0.621833] _OSC request data:1 1f 0 
[    0.621837] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.622688] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[    0.622691] ACPI: \_SB_.PCI0.MIR_: can't evaluate _ADR (0x5)
[    0.622703] PCI host bridge to bus 0000:00
[    0.622705] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.622708] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.622710] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.622712] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.622714] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[    0.622722] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.622742] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.622827] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.622864] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.622916] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.622993] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.623376] pci 0000:00:1a.0: reg 0x10: [mem 0x99105c00-0x99105fff]
[    0.625583] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.625668] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.625718] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.625742] pci 0000:00:1b.0: reg 0x10: [mem 0x99100000-0x99103fff 64bit]
[    0.625842] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.625905] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.625946] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.626048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.626112] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.626151] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.626253] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.626351] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.626454] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.626562] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.626942] pci 0000:00:1d.0: reg 0x10: [mem 0x99105800-0x99105bff]
[    0.629155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.629238] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.629284] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.629410] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.629448] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.629647] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    0.629675] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    0.629687] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[    0.629699] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    0.629710] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[    0.629722] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.629734] pci 0000:00:1f.2: reg 0x24: [mem 0x99105000-0x991057ff]
[    0.629802] pci 0000:00:1f.2: PME# supported from D3hot
[    0.629893] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.629915] pci 0000:00:1f.3: reg 0x10: [mem 0x99106000-0x991060ff 64bit]
[    0.629946] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.630105] pci 0000:01:00.0: [10de:0a34] type 00 class 0x030000
[    0.630120] pci 0000:01:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[    0.630134] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.630148] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[    0.630158] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.630168] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.630280] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[    0.630294] pci 0000:01:00.1: reg 0x10: [mem 0x93000000-0x93003fff]
[    0.630446] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.630449] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.630452] pci 0000:00:01.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.630456] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.630544] acpiphp: Slot [1] registered
[    0.630551] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.630556] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.630562] pci 0000:00:1c.0:   bridge window [mem 0x98100000-0x990fffff]
[    0.630569] pci 0000:00:1c.0:   bridge window [mem 0x93100000-0x940fffff 64bit pref]
[    0.630690] pci 0000:06:00.0: [168c:002b] type 00 class 0x028000
[    0.630722] pci 0000:06:00.0: reg 0x10: [mem 0x97100000-0x9710ffff 64bit]
[    0.630868] pci 0000:06:00.0: supports D1
[    0.630870] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    0.640219] pci 0000:00:1c.1: PCI bridge to [bus 06]
[    0.640230] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.640239] pci 0000:00:1c.1:   bridge window [mem 0x97100000-0x980fffff]
[    0.640252] pci 0000:00:1c.1:   bridge window [mem 0x94100000-0x950fffff 64bit pref]
[    0.640408] pci 0000:07:00.0: [14e4:1692] type 00 class 0x020000
[    0.640452] pci 0000:07:00.0: reg 0x10: [mem 0x96100000-0x9610ffff 64bit]
[    0.640680] pci 0000:07:00.0: PME# supported from D3hot D3cold
[    0.640737] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.650242] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.650254] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.650259] pci 0000:00:1c.2:   bridge window [mem 0x96100000-0x970fffff]
[    0.650267] pci 0000:00:1c.2:   bridge window [mem 0x95100000-0x960fffff 64bit pref]
[    0.650353] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[    0.650366] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.650369] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.650371] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.650373] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[    0.677353] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.677413] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.677471] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.677528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.677585] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.677642] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.677699] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.677756] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.677805] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.677809] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.677814] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.677888] PCI host bridge to bus 0000:ff
[    0.677891] pci_bus 0000:ff: root bus resource [bus ff]
[    0.677897] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.677943] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.677991] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.678037] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.678080] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.678122] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.678493] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.678501] ACPI: \_SB_.PCI0: notify handler is installed
[    0.678560] ACPI: \_SB_.CPBG: notify handler is installed
[    0.678571] Found 2 acpi root devices
[    0.678604] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.678714] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.678717] vgaarb: loaded
[    0.678718] vgaarb: bridge control possible 0000:01:00.0
[    0.678760] PCI: Using ACPI for IRQ routing
[    0.688654] PCI: pci_cache_line_size set to 64 bytes
[    0.688788] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.688790] e820: reserve RAM buffer [mem 0x7b681000-0x7bffffff]
[    0.688792] e820: reserve RAM buffer [mem 0x7b758000-0x7bffffff]
[    0.688794] e820: reserve RAM buffer [mem 0x7b7e3000-0x7bffffff]
[    0.688795] e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
[    0.688898] NetLabel: Initializing
[    0.688899] NetLabel:  domain hash size = 128
[    0.688900] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.688919] NetLabel:  unlabeled traffic allowed by default
[    0.688949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.688954] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.690986] Switched to clocksource hpet
[    0.695899] pnp: PnP ACPI init
[    0.695917] ACPI: bus type PNP registered
[    0.717714] pnp 00:00: [dma 4]
[    0.717752] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.717778] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.717900] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.717939] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.717963] pnp 00:04: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x1fff]
[    0.718003] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.718006] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.718008] system 00:04: [io  0xffff] has been reserved
[    0.718010] system 00:04: [io  0xffff] has been reserved
[    0.718013] system 00:04: [io  0x0400-0x047f] could not be reserved
[    0.718015] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.718019] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.718051] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.718083] pnp 00:06: Plug and Play ACPI device, IDs SYN0716 SYN0700 SYN0002 PNP0f13 (active)
[    0.718113] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.718606] pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.718638] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.718641] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.718643] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.718645] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.718648] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.718650] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.718652] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.718654] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.718657] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.718660] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.718708] pnp 00:09: Plug and Play ACPI device, IDs ENE0201 (active)
[    0.718831] pnp: PnP ACPI: found 10 devices
[    0.718833] ACPI: bus type PNP unregistered
[    0.725668] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.725719] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref]
[    0.725723] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.725725] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.725729] pci 0000:00:01.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.725732] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.725736] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[    0.725739] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.725746] pci 0000:00:1c.0:   bridge window [mem 0x98100000-0x990fffff]
[    0.725751] pci 0000:00:1c.0:   bridge window [mem 0x93100000-0x940fffff 64bit pref]
[    0.725759] pci 0000:00:1c.1: PCI bridge to [bus 06]
[    0.725762] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.725769] pci 0000:00:1c.1:   bridge window [mem 0x97100000-0x980fffff]
[    0.725774] pci 0000:00:1c.1:   bridge window [mem 0x94100000-0x950fffff 64bit pref]
[    0.725782] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.725785] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.725792] pci 0000:00:1c.2:   bridge window [mem 0x96100000-0x970fffff]
[    0.725797] pci 0000:00:1c.2:   bridge window [mem 0x95100000-0x960fffff 64bit pref]
[    0.725805] pci 0000:00:1e.0: PCI bridge to [bus 08]
[    0.725821] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.725823] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.725825] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.725827] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfeafffff]
[    0.725829] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.725831] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff]
[    0.725833] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[    0.725835] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.725837] pci_bus 0000:02: resource 1 [mem 0x98100000-0x990fffff]
[    0.725839] pci_bus 0000:02: resource 2 [mem 0x93100000-0x940fffff 64bit pref]
[    0.725841] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.725843] pci_bus 0000:06: resource 1 [mem 0x97100000-0x980fffff]
[    0.725845] pci_bus 0000:06: resource 2 [mem 0x94100000-0x950fffff 64bit pref]
[    0.725847] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.725849] pci_bus 0000:07: resource 1 [mem 0x96100000-0x970fffff]
[    0.725851] pci_bus 0000:07: resource 2 [mem 0x95100000-0x960fffff 64bit pref]
[    0.725854] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.725856] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.725858] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.725860] pci_bus 0000:08: resource 7 [mem 0x7c000000-0xfeafffff]
[    0.725898] NET: Registered protocol family 2
[    0.726091] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.726161] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.726250] TCP: Hash tables configured (established 16384 bind 16384)
[    0.726281] TCP: reno registered
[    0.726287] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.726307] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.726387] NET: Registered protocol family 1
[    0.751130] pci 0000:01:00.0: Boot video device
[    0.751191] PCI: CLS 64 bytes, default 64
[    0.751240] Unpacking initramfs...
[    0.830311] Freeing initrd memory: 3640K (ffff8800378d4000 - ffff880037c62000)
[    0.830354] Simple Boot Flag at 0x44 set to 0x1
[    0.830570] Scanning for low memory corruption every 60 seconds
[    0.830914] audit: initializing netlink socket (disabled)
[    0.830954] type=2000 audit(1386434366.563:1): initialized
[    0.844182] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.845481] zbud: loaded
[    0.845672] VFS: Disk quotas dquot_6.5.2
[    0.845718] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.845899] msgmni has been set to 3860
[    0.846287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.846349] io scheduler noop registered
[    0.846351] io scheduler deadline registered
[    0.846381] io scheduler cfq registered (default)
[    0.846596] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.847065] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.847080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.847127] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.847128] vesafb: scrolling: redraw
[    0.847130] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.847251] vesafb: framebuffer at 0x91000000, mapped to 0xffffc90010400000, using 1216k, total 1216k
[    0.888867] Console: switching to colour frame buffer device 80x30
[    0.929312] fb0: VESA VGA frame buffer device
[    0.929324] intel_idle: MWAIT substates: 0x1120
[    0.929326] intel_idle: v0.4 model 0x25
[    0.929327] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.929481] GHES: HEST is not enabled!
[    0.929543] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.930041] Linux agpgart interface v0.103
[    0.930113] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.930126] i8042: [0] d1 -> i8042 (command)
[    0.930132] i8042: [0] df -> i8042 (parameter)
[    0.930138] i8042: [0] ff -> i8042 (command)
[    0.930198] i8042: [0] 23 <- i8042 (flush, kbd)
[    0.930222] i8042: [0] 20 -> i8042 (command)
[    0.930231] i8042: [0] 67 <- i8042 (return)
[    0.930285] i8042: [0] 20 -> i8042 (command)
[    0.930293] i8042: [0] 67 <- i8042 (return)
[    0.930300] i8042: [0] 60 -> i8042 (command)
[    0.932731] i8042: [0] 76 -> i8042 (parameter)
[    0.935388] i8042: [1] d3 -> i8042 (command)
[    0.938557] i8042: [1] 5a -> i8042 (parameter)
[    0.938565] i8042: [1]      -- i8042 (auxerr)
[    0.940211] i8042: [3] a9 -> i8042 (command)
[    0.940219] i8042: [3] 23 <- i8042 (return)
[    0.940239] i8042: [3] Interrupt 1, without any data
[    0.943719] i8042: [4] 60 -> i8042 (command)
[    0.946731] i8042: [4] 67 -> i8042 (parameter)
[    0.946743] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.946867] mousedev: PS/2 mouse device common for all mice
[    0.948785] i8042: [6] f2 -> i8042 (kbd-data)
[    0.948796] i8042: [6] 00 <- i8042 (interrupt, 0, 1)
[    0.948854] rtc_cmos 00:05: RTC can wake from S4
[    0.949019] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.949053] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.949134] drop_monitor: Initializing network drop monitor service
[    0.949204] TCP: cubic registered
[    0.949326] NET: Registered protocol family 10
[    0.949533] NET: Registered protocol family 17
[    0.949546] Key type dns_resolver registered
[    0.949901] registered taskstats version 1
[    0.950565]   Magic number: 9:392:691
[    0.957376] i8042: [7] 60 -> i8042 (command)
[    0.960548] i8042: [9] 66 -> i8042 (parameter)
[    0.960567] rtc_cmos 00:05: setting system clock to 2013-12-07 16:39:27 UTC (1386434367)
[    0.960628] PM: Hibernation image not present or could not be loaded.
[    0.962636] i8042: [9] 60 -> i8042 (command)
[    0.965649] i8042: [11] 67 -> i8042 (parameter)
[    0.965670] i8042: [11] 5a <- i8042 (interrupt, 1, 0)
[    0.966669] Freeing unused kernel memory: 1160K (ffffffff818cd000 - ffffffff819ef000)
[    0.966672] Write protecting the kernel read-only data: 8192k
[    0.967662] i8042: [12] fa <- i8042 (interrupt, 0, 1)
[    0.968027] i8042: [12] f2 -> i8042 (kbd-data)
[    0.968249] i8042: [12] ab <- i8042 (interrupt, 0, 1)
[    0.969630] Freeing unused kernel memory: 980K (ffff88000150b000 - ffff880001600000)
[    0.970570] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000)
[    0.976683] i8042: [14] fa <- i8042 (interrupt, 0, 1)
[    0.978343] i8042: [15] ab <- i8042 (interrupt, 0, 1)
[    0.978930] systemd-udevd[57]: starting version 208
[    0.980041] i8042: [15] 41 <- i8042 (interrupt, 0, 1)
[    0.980057] i8042: [15] f5 -> i8042 (kbd-data)
[    0.981681] i8042: [16] 23 <- i8042 (interrupt, 0, 1)
[    0.982631] [drm] Initialized drm 1.1.0 20060810
[    0.983985] wmi: Mapper loaded
[    0.984709] i8042: [17] fa <- i8042 (interrupt, 0, 1)
[    0.984736] i8042: [17] ed -> i8042 (kbd-data)
[    0.984739] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.986132] i8042: [17] 23 <- i8042 (interrupt, 0, 1)
[    0.989692] i8042: [18] fa <- i8042 (interrupt, 0, 1)
[    0.989721] i8042: [18] 00 -> i8042 (kbd-data)
[    0.994055] i8042: [19] fa <- i8042 (interrupt, 0, 1)
[    0.994079] i8042: [19] f3 -> i8042 (kbd-data)
[    1.000465] i8042: [21] fa <- i8042 (interrupt, 0, 1)
[    1.000485] i8042: [21] 00 -> i8042 (kbd-data)
[    1.006166] i8042: [23] fa <- i8042 (interrupt, 0, 1)
[    1.006204] i8042: [23] f4 -> i8042 (kbd-data)
[    1.012989] i8042: [25] fa <- i8042 (interrupt, 0, 1)
[    1.013139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.020504] i8042: [27] 23 <- i8042 (interrupt, 0, 1)
[    1.026812] acpi device:0b: registered as cooling_device0
[    1.026938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input2
[    1.028000] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0C:00/input/input3
[    1.028005] ACPI: Power Button [PWRB]
[    1.028046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0E:00/input/input4
[    1.028049] ACPI: Sleep Button [SLPB]
[    1.028109] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0D:00/input/input5
[    1.028143] ACPI: Lid Switch [LID0]
[    1.028204] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    1.028207] ACPI: Power Button [PWRF]
[    1.032472] checking generic (91000000 130000) vs hw (80000000 10000000)
[    1.032476] checking generic (91000000 130000) vs hw (90000000 2000000)
[    1.032477] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[    1.032495] Console: switching to colour dummy device 80x25
[    1.033206] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a5a00a2
[    1.033210] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT216 (NVA5)
[    1.033212] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[    1.034746] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    1.090203] i8042: [48] a3 <- i8042 (interrupt, 0, 1)
[    1.164871] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    1.164874] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[    1.165013] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    1.165016] nouveau  [   VBIOS][0000:01:00.0] version 70.16.1c.00.21
[    1.186752] nouveau 0000:01:00.0: irq 41 for MSI/MSI-X
[    1.186768] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    1.186808] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[    1.186810] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[    1.186812] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 1920 tags
[    1.193268] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 850000uv
[    1.216778] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    1.216786] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    1.216793] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    1.216865] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[    1.216868] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[    1.216872] nouveau  [     CLK][0000:01:00.0] 0f: core 550 MHz shader 1210 MHz memory 790 MHz
[    1.216915] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[    1.217077] [TTM] Zone  kernel: Available graphics memory: 989576 kiB
[    1.217079] [TTM] Initializing pool allocator
[    1.217088] [TTM] Initializing DMA pool allocator
[    1.217100] nouveau  [     DRM] VRAM: 1024 MiB
[    1.217102] nouveau  [     DRM] GART: 1048576 MiB
[    1.217105] nouveau  [     DRM] TMDS table version 2.0
[    1.217107] nouveau  [     DRM] DCB version 4.0
[    1.217110] nouveau  [     DRM] DCB outp 00: 01010323 00010034
[    1.217112] nouveau  [     DRM] DCB outp 01: 02001300 00000000
[    1.217114] nouveau  [     DRM] DCB outp 02: 02022362 00020010
[    1.217115] nouveau  [     DRM] DCB conn 00: 00000040
[    1.217117] nouveau  [     DRM] DCB conn 01: 00000100
[    1.217119] nouveau  [     DRM] DCB conn 02: 00002261
[    1.262069] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.262071] [drm] No driver support for vblank timestamp query.
[    1.262074] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[    1.312004] nouveau  [     DRM] MM: using COPY for buffer copies
[    1.378061] nouveau  [     DRM] allocated 1366x768 fb: 0x70000, bo ffff880076b12400
[    1.378412] fbcon: nouveaufb (fb0) is primary device
[    1.830558] tsc: Refined TSC clocksource calibration: 2128.004 MHz
[    2.720296] Console: switching to colour frame buffer device 170x48
[    2.720896] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.720898] nouveau 0000:01:00.0: registered panic notifier
[    2.720904] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[    2.781027] SCSI subsystem initialized
[    2.785979] ACPI: bus type USB registered
[    2.786039] usbcore: registered new interface driver usbfs
[    2.786061] usbcore: registered new interface driver hub
[    2.786522] usbcore: registered new device driver usb
[    2.787074] libata version 3.00 loaded.
[    2.788578] ahci 0000:00:1f.2: version 3.0
[    2.788891] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.788948] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.789000] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    2.789007] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    2.789274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.789510] ehci-pci: EHCI PCI platform driver
[    2.803104] scsi0 : ahci
[    2.803592] scsi1 : ahci
[    2.803715] scsi2 : ahci
[    2.804500] scsi3 : ahci
[    2.805114] scsi4 : ahci
[    2.805363] ata1: SATA max UDMA/133 abar m2048@0x99105000 port 0x99105100 irq 42
[    2.805422] ata2: SATA max UDMA/133 abar m2048@0x99105000 port 0x99105180 irq 42
[    2.805425] ata3: DUMMY
[    2.805427] ata4: DUMMY
[    2.805432] ata5: SATA max UDMA/133 abar m2048@0x99105000 port 0x99105300 irq 42
[    2.805663] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.805676] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.805696] ehci-pci 0000:00:1a.0: debug port 2
[    2.809687] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.809710] ehci-pci 0000:00:1a.0: irq 16, io mem 0x99105c00
[    2.816769] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.816979] hub 1-0:1.0: USB hub found
[    2.816988] hub 1-0:1.0: 3 ports detected
[    2.817239] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.817246] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.817260] ehci-pci 0000:00:1d.0: debug port 2
[    2.821197] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.821219] ehci-pci 0000:00:1d.0: irq 23, io mem 0x99105800
[    2.830120] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.830223] Switched to clocksource tsc
[    2.830611] hub 2-0:1.0: USB hub found
[    2.830632] hub 2-0:1.0: 3 ports detected
[    3.123413] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.126695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.127390] ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
[    3.127398] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.128201] ata1.00: configured for UDMA/133
[    3.128425] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX4      1.5  PQ: 0 ANSI: 5
[    3.247461] hub 1-1:1.0: USB hub found
[    3.247625] hub 1-1:1.0: 6 ports detected
[    3.353282] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.446596] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.459677] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, F820, max UDMA/100
[    3.474591] ata2.00: configured for UDMA/100
[    3.477642] hub 2-1:1.0: USB hub found
[    3.477746] hub 2-1:1.0: 8 ports detected
[    3.477899] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7580S  F820 PQ: 0 ANSI: 5
[    3.546651] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    3.743314] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    3.796436] ata5: SATA link down (SStatus 0 SControl 300)
[    3.800088] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.800206] sd 0:0:0:0: [sda] Write Protect is off
[    3.800215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.800282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.803451]  sda: sda1 sda2 sda3
[    3.804130] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.804470] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.804474] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.804735] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.195399] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.270424] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    4.271582] systemd[1]: Set hostname to <o2pc>.
[    4.274329] random: systemd urandom read with 72 bits of entropy available
[    4.341107] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    4.341540] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.341661] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.341689] systemd[1]: Starting Remote File Systems.
[    4.341713] systemd[1]: Reached target Remote File Systems.
[    4.341732] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    4.341791] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.341810] systemd[1]: Starting LVM2 metadata daemon socket.
[    4.341863] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.341882] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.341918] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.341936] systemd[1]: Starting Delayed Shutdown Socket.
[    4.341976] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.342035] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.342219] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.342248] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.342315] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.342334] systemd[1]: Starting Paths.
[    4.342355] systemd[1]: Reached target Paths.
[    4.342372] systemd[1]: Starting Encrypted Volumes.
[    4.342391] systemd[1]: Reached target Encrypted Volumes.
[    4.342414] systemd[1]: Starting udev Kernel Socket.
[    4.342454] systemd[1]: Listening on udev Kernel Socket.
[    4.342476] systemd[1]: Starting udev Control Socket.
[    4.342518] systemd[1]: Listening on udev Control Socket.
[    4.342540] systemd[1]: Starting Journal Socket.
[    4.342625] systemd[1]: Listening on Journal Socket.
[    4.342666] systemd[1]: Mounting Huge Pages File System...
[    4.344185] systemd[1]: Started Set Up Additional Binary Formats.
[    4.344231] systemd[1]: Starting udev Coldplug all Devices...
[    4.344940] systemd[1]: Mounting Debug File System...
[    4.346524] systemd[1]: Starting Apply Kernel Variables...
[    4.347091] systemd[1]: Starting Setup Virtual Console...
[    4.353930] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.354487] systemd[1]: Mounting POSIX Message Queue File System...
[    4.357367] systemd[1]: Starting Load Kernel Modules...
[    4.357702] systemd[1]: Starting Journal Service...
[    4.358782] systemd[1]: Started Journal Service.
[    4.371482] EXT4-fs (sda2): re-mounted. Opts: discard
[    4.375670] i2c /dev entries driver
[    4.376362] systemd-journald[132]: Vacuuming done, freed 0 bytes
[    4.400629] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[    4.400637] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.429366] systemd-udevd[157]: starting version 208
[    4.434254] systemd-journald[132]: Received request to flush runtime journal from PID 1
[    4.527006] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.533311] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[    4.533313] ene_ir: PLL freq = 1000
[    4.533315] ene_ir: KB3926D or higher detected
[    4.533330] ene_ir: Firmware regs: cc 00
[    4.533331] ene_ir: Hardware features:
[    4.533332] ene_ir: * Uses GPIO 40 for IR demodulated input
[    4.533333] ene_ir: * Uses new style input buffer
[    4.533381] ene_ir: Hardware uses 2 extended buffers:
[    4.533382] ene_ir:   0xfa48 - len : 15
[    4.533384] ene_ir:   0xfa00 - len : 17
[    4.533385] ene_ir: Total buffer len = 40
[    4.538176] ACPI: AC Adapter [ACAD] (on-line)
[    4.555652] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    4.557643] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[    4.559700] Registered IR keymap rc-rc6-mce
[    4.560655] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
[    4.560923] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[    4.566518] IR RC6 protocol handler initialized
[    4.566814] IR RC5(x) protocol handler initialized
[    4.567212] IR JVC protocol handler initialized
[    4.569200] IR NEC protocol handler initialized
[    4.570794] pps_core: LinuxPPS API ver. 1 registered
[    4.570798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    4.571733] IR MCE Keyboard/mouse protocol handler initialized
[    4.571838] IR SANYO protocol handler initialized
[    4.571976] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input8
[    4.572324] PTP clock support registered
[    4.573220] ene_ir: driver has been successfully loaded
[    4.574320] IR Sony protocol handler initialized
[    4.576848] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    4.578547] lirc_dev: IR Remote Control driver registered, major 249 
[    4.580568] tg3.c:v3.134 (Sep 16, 2013)
[    4.582159] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[    4.582166] IR LIRC bridge handler initialized
[    4.587881] cfg80211: Calling CRDA to update world regulatory domain
[    4.589851] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.590134] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.593140] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    4.593148] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.593154] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    4.593158] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.593160] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    4.593165] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.593167] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    4.593171] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.593173] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.593242] libphy: tg3 mdio bus: probed
[    4.593957] hda_intel: Disabling MSI
[    4.593964] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    4.603384] tg3 0000:07:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 70:5a:b6:5f:4c:c4
[    4.603388] tg3 0000:07:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=700:01)
[    4.603391] tg3 0000:07:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    4.603393] tg3 0000:07:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    4.618176] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[    4.624032] platform microcode: Direct firmware load failed with error -2
[    4.624038] platform microcode: Falling back to user helper
[    4.631780] ideapad_slidebar: Laptop model 'Lenovo IdeaPad Y550P'
[    4.672633] Adding 4190204k swap on /dev/sda3.  Priority:-1 extents:1 across:4190204k SSFS
[    4.696164] ACPI: Invalid active0 threshold
[    4.701631] ath: phy0: Enable LNA combining
[    4.704418] ath: phy0: ASPM enabled: 0x43
[    4.704422] ath: EEPROM regdomain: 0x6a
[    4.704424] ath: EEPROM indicates we should expect a direct regpair map
[    4.704427] ath: Country alpha2 being used: 00
[    4.704428] ath: Regpair used: 0x6a
[    4.709441] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input12
[    4.716028] random: nonblocking pool is initialized
[    4.717198] Bluetooth: Core ver 2.17
[    4.717218] NET: Registered protocol family 31
[    4.717220] Bluetooth: HCI device and connection manager initialized
[    4.717231] Bluetooth: HCI socket layer initialized
[    4.717234] Bluetooth: L2CAP socket layer initialized
[    4.717240] Bluetooth: SCO socket layer initialized
[    4.719068] usbcore: registered new interface driver btusb
[    4.719106] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.719425] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90015200000, irq=17
[    4.727739] media: Linux media interface: v0.10
[    4.731785] Linux video capture interface: v2.00
[    4.740364] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:7371)
[    4.796054] thermal LNXTHERM:00: registered as thermal_zone0
[    4.796059] ACPI: Thermal Zone [TZ00] (51 C)
[    4.801246] iTCO_vendor_support: vendor-support=0
[    4.803147] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[    4.803165] platform microcode: Direct firmware load failed with error -2
[    4.803168] platform microcode: Falling back to user helper
[    4.803903] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.804016] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    4.804188] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.816117] systemd-udevd[171]: renamed network interface eth0 to enp7s0
[    4.827947] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[    4.827967] platform microcode: Direct firmware load failed with error -2
[    4.827969] platform microcode: Falling back to user helper
[    4.832522] systemd-udevd[174]: renamed network interface wlan0 to wlp6s0
[    4.833834] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[    4.833865] platform microcode: Direct firmware load failed with error -2
[    4.833871] platform microcode: Falling back to user helper
[    4.836900] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    4.859130] kvm: disabled by bios
[    4.919434] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input13
[    4.919720] usbcore: registered new interface driver uvcvideo
[    4.919725] USB Video Class driver (1.1.1)
[    5.269471] ACPI: Battery Slot [BAT1] (battery present)
[    5.275917] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    5.276022] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    5.276113] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    5.276200] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    5.336683] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[    5.339221] tg3 0000:07:00.0: irq 44 for MSI/MSI-X
[    5.360249] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    5.405775] i8042: [1344] a8 -> i8042 (command)
[    5.405928] input: PC Speaker as /devices/platform/pcspkr/input/input18
[    5.406262] input: IdeaPad Slidebar as /devices/platform/ideapad_slidebar/input/input19
[    5.603395] tg3 0000:07:00.0 enp7s0: Link is down


On 12/07/2013 08:02 PM, Dmitry Torokhov wrote:
> On Sat, Dec 07, 2013 at 05:47:09PM +0400, Andrey Moiseev wrote:
>> I inserted a printk into ps2_handle_response(struct ps2dev *ps2dev,
>> unsigned char data) in "drivers/input/serio/libps2.c" and other
>> functions in the file.
>> It really eats scancodes from the keyboard, as I see (0x23 is the 'H'
>> press scancode). Seems like the scancodes are mixed with reasonable
>> values. Is it a bug in the controller? 
> 
> Not necessarily... Can you boot with i8042.debug=1 and post full dmesg?
> 
> Thanks.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux DVB]     [Asterisk Internet PBX]     [DCCP]     [Netdev]     [X.org]     [Util Linux NG]     [Fedora Women]     [ALSA Devel]     [Linux USB]

  Powered by Linux