RE: [PATCH] Multi-AP: wpa_supplicant: added support for VLAN ID and Multi-AP profile parsing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
Is there any feedback on this patch?
Upper layers (e.g. Easymesh agent in a repeater) may need to know the VLAN ID of the backhaul AP, hence we would like to add this information to WPA_EVENT_CONNECTED.

Best regards,
Arnon

-----Original Message-----
From: Jurijs Soloveckis <jsoloveckis@xxxxxxxxxxxxx> 
Sent: Wednesday, 21 August 2024 10:35
To: hostap@xxxxxxxxxxxxxxxxxxx
Cc: Arnon Meydav <ameydav@xxxxxxxxxxxxx>; Sergejs Hatinecs <shatinecs@xxxxxxxxxxxxx>
Subject: [PATCH] Multi-AP: wpa_supplicant: added support for VLAN ID and Multi-AP profile parsing

For Multi-AP traffic separation requirement, wpa_supplicant parses 802.1Q Multi-AP sub-element and reports:
- VLAN ID of the AP it connects to.
- Multi-AP profile of the AP it connects to.

Signed-off-by: Jurijs Soloveckis <jsoloveckis@xxxxxxxxxxxxx>
---
 wpa_supplicant/config_ssid.h    |  7 +++++++
 wpa_supplicant/events.c         | 12 ++++++++++++
 wpa_supplicant/wpa_supplicant.c |  7 +++++--
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index d64c30508..48e4a1da0 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -1192,6 +1192,13 @@ struct wpa_ssid {
 	 */
 	int multi_ap_profile;
 
+	/**
+	 * multi_ap_primary_vlanid - Multi-AP Primary VLAN ID (Multi-AP Specification v2.0)
+	 * 0 = VLAN ID not set
+	 * 1-4094 = VLAN ID
+	 */
+	u16 multi_ap_primary_vlanid;
+
 	/**
 	 * beacon_prot - Whether Beacon protection is enabled
 	 *
diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c
index 724f2413f..d80b65add 100644
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
@@ -3093,6 +3093,7 @@ static void multi_ap_process_assoc_resp(struct wpa_supplicant *wpa_s,
 {
 	struct ieee802_11_elems elems;
 	struct multi_ap_params multi_ap;
+	struct wpa_ssid *ssid = wpa_s->current_ssid;
 	u16 status;
 
 	wpa_s->multi_ap_ie = 0;
@@ -3112,6 +3113,17 @@ static void multi_ap_process_assoc_resp(struct wpa_supplicant *wpa_s,
 	wpa_s->multi_ap_fronthaul = !!(multi_ap.capability &
 				       MULTI_AP_FRONTHAUL_BSS);
 	wpa_s->multi_ap_ie = 1;
+
+	if (!ssid)
+		return;
+
+	ssid->multi_ap_primary_vlanid = 0;
+
+	if (wpa_s->multi_ap_backhaul) {
+		ssid->multi_ap_profile = multi_ap.profile;
+		if (ssid->multi_ap_backhaul_sta)
+			ssid->multi_ap_primary_vlanid = multi_ap.vlanid;
+	}
 }
 
 
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index 81858327b..c29fb562c 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -1114,11 +1114,14 @@ void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
 
 #if defined(CONFIG_CTRL_IFACE) || !defined(CONFIG_NO_STDOUT_DEBUG)
 		wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_CONNECTED "- Connection to "
-			MACSTR " completed [id=%d id_str=%s%s]%s",
+			MACSTR " completed [id=%d id_str=%s%s]%s"
+			" multi_ap_profile=%d multi_ap_primary_vlanid=%d",
 			MAC2STR(wpa_s->bssid),
 			ssid ? ssid->id : -1,
 			ssid && ssid->id_str ? ssid->id_str : "",
-			fils_hlp_sent ? " FILS_HLP_SENT" : "", mld_addr);
+			fils_hlp_sent ? " FILS_HLP_SENT" : "", mld_addr,
+			ssid ? ssid->multi_ap_profile : 0,
+			ssid ? ssid->multi_ap_primary_vlanid : 0);
 #endif /* CONFIG_CTRL_IFACE || !CONFIG_NO_STDOUT_DEBUG */
 		wpas_clear_temp_disabled(wpa_s, ssid, 1);
 		wpa_s->consecutive_conn_failures = 0;
-- 
2.17.1

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux