Re: Unable to Connect to Open Network

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While under hostap-2.9 I can connect to the AP.

wpa_driver_bsd_associate: ssid 'Golden_Pond' wpa ie len 0 pairwise 1 group 
1 key mgmt 4

Notice that there is no IE for this open unprotected network.


-- 
Cheers,
Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
FreeBSD UNIX:  <cy@xxxxxxxxxxx>   Web:  http://www.FreeBSD.org
NTP:           <cy@xxxxxxxxxx>    Web:  https://nwtime.org

			e**(i*pi)+1=0


Cy Schubert writes:
> I've been able to reproduce the problem locally.
>
> The difference between an open AP that I can associate to and one I cannot 
> is:
>
> associates:
> wpa_driver_bsd_associate: ssid 'KQNGN3' wpa ie len 0 pairwise 1 group 1 key 
> mgmt 4
>
> Does not associate:
> wpa_driver_bsd_associate: ssid 'Golden_Pond' wpa ie len 13 pairwise 1 group 
> 1 key mgmt 4
>
> The Information Element appears to cause it to use WPA on an open network.
>
>
> -- 
> Cheers,
> Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
> FreeBSD UNIX:  <cy@xxxxxxxxxxx>   Web:  http://www.FreeBSD.org
> NTP:           <cy@xxxxxxxxxx>    Web:  https://nwtime.org
>
> 			e**(i*pi)+1=0
>
>
> Cy Schubert writes:
> > I have a user with AR9285 who was able to associate with and use an open ne
> tw
> > ork
> > (WHU-STU in the list below).
> >
> > % ifconfig wlan0 scan
> > SSID/MESH ID                      BSSID              CHAN RATE    S:N     I
> NT
> >  CAPS
> > WHU-STU                           70:d9:31:0e:5e:20    1   54M  -81:-96   3
> 00
> >  ES   HTCAP WME ATH
> > CU_3n2r                           80:ee:25:a7:af:c8    6   54M  -93:-96   1
> 00
> >  EP   RSN WPS HTCAP WME BSSLOAD
> > HUAWEI-4QGNEY                     5c:03:39:dd:2e:7c   11   54M  -87:-96   1
> 00
> >  EPS  HTCAP WME ATH WPS RSN
> > WHU-STU                           70:d9:31:03:06:40   13   54M  -92:-96   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           70:d9:31:03:19:e0   13   54M  -93:-96   3
> 00
> >  ES   HTCAP WME ATH
> > Xiaomi_102                        50:d2:f5:87:7a:5a    2   54M  -91:-96   1
> 00
> >  EP   APCHANREP APCHANREP WPA RSN WPS HTCAP WME BSSLOAD
> > ChinaNet-r6xR                     ec:f0:fe:71:ea:53    3   54M  -93:-96   1
> 00
> >  EPS  WPA RSN HTCAP WME BSSLOAD
> > ChinaNet-wqSx                     6c:d2:ba:94:73:d3    4   54M  -93:-96   1
> 00
> >  EPS  WPA RSN HTCAP WME BSSLOAD
> > WHU-STU                           fc:b6:98:f5:cc:00    5   54M  -85:-96   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           70:d9:31:0e:2c:00    5   54M  -73:-96   3
> 00
> >  ES   HTCAP WME ATH   # <-------- the one supposed to work
> > WHU-STU                           70:d9:31:0e:19:20    5   54M  -86:-96   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           fc:b6:98:f6:01:a0    5   54M  -88:-96   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           70:d9:31:0e:1b:e0    5   54M  -94:-96   3
> 00
> >  ES   HTCAP WME ATH
> > CMCC-UKg3                         14:ad:ca:ce:ea:fe    8   54M  -94:-96   1
> 00
> >  EPS  APCHANREP APCHANREP WPA RSN HTCAP WME BSSLOAD
> > WHU-STU                           fc:b6:98:f6:0a:20    9   54M  -81:-95   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           70:d9:31:12:9b:80    9   54M  -85:-95   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           fc:b6:98:f5:cc:80    9   54M  -85:-95   3
> 00
> >  ES   HTCAP WME ATH
> > WHU-STU                           fc:b6:98:f6:22:80    9   54M  -92:-95   3
> 00
> >  ES   HTCAP WME ATH
> >
> > When using wpa_supplicant 2.9 they are able to associate and dhclient is ab
> le
> >  to
> > obtain an IP address:
> >
> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> >         ether 1c:4b:d6:ca:3e:ac
> >         inet 10.134.135.167/17 broadcast 10.134.255.255
> >         groups: wlan
> >         ssid WHU-STU channel 13 (2472 MHz 11g ht/20) bssid fc:b6:98:f6:12:8
> 0
> >         regdomain 96 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 
> 7
> >         scanvalid 60 protmode CTS ampdulimit 64k shortgi -stbctx stbcrx -ld
> pc
> >         -uapsd wme burst roaming MANUAL bintval 300
> >         parent interface: ath0
> >         media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
> >         status: associated
> >         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> >
> > However using wpa_supplicant 2.10 they associate 50% of the time but 100% o
> f 
> > the
> > time are unable to communicate with the AP:
> >
> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>   
> >    
> >         ether 1c:4b:d6:ca:3e:ac                                            
>   
> >    
> >         inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255          
>   
> >    
> >         groups: wlan                          
> >         ssid WHU-STU channel 5 (2432 MHz 11g ht/20) bssid 70:d9:31:0e:2c:00
>   
> >    
> >         regdomain 96 indoor ecm authmode WPA privacy MIXED deftxkey UNDEF  
>   
> >    
> >         txpower 20 bmiss 7 scanvalid 60 protmode CTS ampdulimit 64k shortgi
>   
> >    
> >         -stbctx stbcrx -ldpc -uapsd wme burst roaming MANUAL bintval 300   
>   
> >    
> >         parent interface: ath0                
> >         media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11ng            
>   
> >    
> >         status: associated                    
> >         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> >
> >
> > Wpa_supplicant 2.10 configures the device with:
> > 	authmode WPA privacy MIXED deftxkey UNDEF
> >
> > While with wpa_supplicant 2.9 the following are correctly set:
> > 	authmode OPEN privacy OFF
> >
> > It appears that wpa_supplicant has configured WPA even though the following
>  a
> > re in wpa_supplicant.conf.
> >
> > network={                                                                  
>   
> >                                                                            
>   
> >                                  
> >  ssid="WHU-STU"                                                            
>   
> >                                                                            
>   
> >                                 
> >  key_mgmt=NONE                                                             
>   
> >                                                                            
>   
> >                                  
> > }
> >
> > The same drivers are in use.
> >
> > What am I missing? Or is there something else going on?
> >
> >
> > -- 
> > Cheers,
> > Cy Schubert <Cy.Schubert@xxxxxxxxxxxxx>
> > FreeBSD UNIX:  <cy@xxxxxxxxxxx>   Web:  http://www.FreeBSD.org
> > NTP:           <cy@xxxxxxxxxx>    Web:  https://nwtime.org
> >
> > 			e**(i*pi)+1=0
> >
>
>



_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux