Hi, I’ve just received this after uploading 2.10 to unstable. -- Cheers, Andrej ----- Original message ----- From: Michael Biebl <biebl@xxxxxxxxxx> To: Debian Bug Tracking System <submit@xxxxxxxxxxxxxxx> Subject: Bug#1003907: fails to successfully associate Date: Tuesday, 18 January 2022 00:23 Package: wpasupplicant Version: 2:2.10-1 Severity: grave Hi, during todays upgrade of wpasupplicant 2:2.9.0-23 to 2:2.10-1 my network connection was killed (I'm using NetworkManager 1.34.0) and I wasn't able to successfully connect again, even after a reboot. Only a downgrade to 2:2.9.0-23 helped. Attached is the journal log for wpasupplicant.service and a dmesg output. Marking as RC so the package doesn't migrate until this has been investigated. Regards, Michael -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (200, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.15.0-2-amd64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_WARN, TAINT_FIRMWARE_WORKAROUND, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages wpasupplicant depends on: ii adduser 3.118 ii libc6 2.33-2 ii libdbus-1-3 1.12.20-3 ii libnl-3-200 3.4.0-1+b1 ii libnl-genl-3-200 3.4.0-1+b1 ii libnl-route-3-200 3.4.0-1+b1 ii libpcsclite1 1.9.5-1 ii libreadline8 8.1.2-1 ii libssl1.1 1.1.1m-1 ii lsb-base 11.1.0 wpasupplicant recommends no packages. Versions of packages wpasupplicant suggests: pn libengine-pkcs11-openssl <none> pn wpagui <none> -- Configuration Files: /etc/wpa_supplicant/ifupdown.sh changed [not included] -- no debconf information
Attachment:
dmesg
Description: application/json
Jan 18 00:17:02 pluto systemd[1]: Starting WPA supplicant... Jan 18 00:17:03 pluto systemd[1]: Started WPA supplicant. Jan 18 00:17:03 pluto wpa_supplicant[664]: Successfully initialized wpa_supplicant Jan 18 00:17:04 pluto wpa_supplicant[664]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface.P2PDevice dbus_property=P2PDeviceConfig getter failed Jan 18 00:17:07 pluto wpa_supplicant[664]: wlp3s0: WPS-CANCEL Jan 18 00:17:07 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-ADDED 38:10:d5:8f:38:e2 0 Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-ASSOC-REJECT bssid=38:10:d5:8f:38:e2 status_code=40 Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: SME: Deauth request to the driver failed Jan 18 00:17:08 pluto wpa_supplicant[664]: BSSID 38:10:d5:8f:38:e2 ignore list count incremented to 2, ignoring for 10 seconds Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e1 (SSID='myessid' freq=2462 MHz) Jan 18 00:17:08 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e1 (SSID='myessid' freq=2462 MHz) Jan 18 00:17:09 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-ADDED 38:10:d5:8f:38:e1 0 Jan 18 00:17:09 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e1 (SSID='myessid' freq=2462 MHz) Jan 18 00:17:12 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:12 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:12 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-ASSOC-REJECT bssid=38:10:d5:8f:38:e2 status_code=40 Jan 18 00:17:12 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-REMOVED 38:10:d5:8f:38:e2 0 Jan 18 00:17:12 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-REMOVED 38:10:d5:8f:38:e1 0 Jan 18 00:17:12 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:13 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:13 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-ADDED 38:10:d5:8f:38:e2 0 Jan 18 00:17:13 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:13 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-ASSOC-REJECT bssid=38:10:d5:8f:38:e2 status_code=40 Jan 18 00:17:13 pluto wpa_supplicant[664]: wlp3s0: SME: Deauth request to the driver failed Jan 18 00:17:13 pluto wpa_supplicant[664]: BSSID 38:10:d5:8f:38:e2 ignore list count incremented to 2, ignoring for 10 seconds Jan 18 00:17:14 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e1 (SSID='myessid' freq=2462 MHz) Jan 18 00:17:16 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e1 (SSID='myessid' freq=2462 MHz) Jan 18 00:17:16 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-ADDED 38:10:d5:8f:38:e1 0 Jan 18 00:17:16 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e1 (SSID='myessid' freq=2462 MHz) Jan 18 00:17:16 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-ASSOC-REJECT bssid=38:10:d5:8f:38:e1 status_code=40 Jan 18 00:17:16 pluto wpa_supplicant[664]: wlp3s0: SME: Deauth request to the driver failed Jan 18 00:17:16 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="myessid" auth_failures=1 duration=10 reason=CONN_FAILED Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="myessid" Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-ASSOC-REJECT bssid=38:10:d5:8f:38:e2 status_code=40 Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-REMOVED 38:10:d5:8f:38:e2 0 Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-REMOVED 38:10:d5:8f:38:e1 0 Jan 18 00:17:26 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:27 pluto wpa_supplicant[664]: wlp3s0: SME: Trying to authenticate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:27 pluto wpa_supplicant[664]: wlp3s0: PMKSA-CACHE-ADDED 38:10:d5:8f:38:e2 0 Jan 18 00:17:27 pluto wpa_supplicant[664]: wlp3s0: Trying to associate with 38:10:d5:8f:38:e2 (SSID='myessid' freq=5620 MHz) Jan 18 00:17:27 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-ASSOC-REJECT bssid=38:10:d5:8f:38:e2 status_code=40 Jan 18 00:17:27 pluto wpa_supplicant[664]: wlp3s0: SME: Deauth request to the driver failed Jan 18 00:17:27 pluto wpa_supplicant[664]: BSSID 38:10:d5:8f:38:e2 ignore list count incremented to 3, ignoring for 60 seconds Jan 18 00:17:27 pluto wpa_supplicant[664]: wlp3s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="myessid" auth_failures=2 duration=20 reason=CONN_FAILED
_______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
