Mandi! Dennis Bland In chel di` si favelave... > Try to assign an actual channel (e.g. 1) instead of using ACS, and > then use Wireshark to see if the beacon is being advertised on that > channel. > Also, is there any reason why you set wpa=1? WPAv1 is deprecated and > should no longer be used. For compatibility, set wpa=3, which is bit > 0 (WPAv1) and bit 1 (WPAv2) enabled to support both WPAv1 and WPAv2. > Also suggest removing CCMP from wpa_pairwise, as WPAv1 with CCMP is > not officially a valid combination. I've setup a test system, with the same kernel and distro, and tried to setup 'hw_mode=b', channel=1 and wpa=3, but nothing changed, still hostapd simply quits. If could be useful, there's some more tests i can do? Thanks. -- Marco ``Gaio'' Gaiarin | Pordenone Linux User Group (https://www.pnlug.it/) P.zza S. Tommaso, 20 | Lilliput BBS (http://bbs.lilliput.linux.it) Cimpello di Fiume Veneto | Azione Cattolica - Concordia-Pordenone 33080 Pordenone (Italia) | (https://www.acconcordiapn.it/) Tel. +39-0434-56-1305 | Mastodon:@marcogaio@sociale.network gaio@xxxxxxxx _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
