Does 802.11r over-the-DS work correctly in WPA-Personal mode? Regarding hostapd with OpenWRT: Normally you would include hostapd with OpenWRT, as it's an AP platform. If you only want the 802.1X authentication functionality of OpenWRT, is there a reason why you wouldn't simply use FreeRADIUS as your authentication server? If you are observing STA action frames being forwarded from the currently-associated AP to the virtual OpenWRT node, then the STA considers the virtual OpenWRT to be a valid roam target. Or those frames are actually encapsulated EAP over RADIUS packets to perform a full STA reauthentication during a (non-802.11r) roam. A wireless packet capture of 802.11 management frames would really help debug this issue. On Wed, Sep 23, 2020 at 2:57 PM Michael T Farnworth <michael@xxxxxxxx> wrote: > > I have checked all my r0kh records and r1kh records, plus the > r1_key_holder and none of them include the MAC address of the radius > server. More to the point the MAC address of the radius server isn't > listed anywhere in the hostapd.conf files. > > I should say that the RADIUS server also acts as the default gateway to > the internet, but with no WiFi hardware never acts as an AP. > > Thanks, > Michael > > On 23/09/2020 20:38, michael-dev wrote: > > Am 23.09.2020 10:20, schrieb Michael T Farnworth: > >> In reality the client is sending the 890d packets to the MAC address of > >> the device running the radius server. > >> > >> Is this normal behaviour and is it the case that any radius server > >> controlling access to a network must also run hostapd in order for > >> 802.11r to work? > > > > No, that is not how it should work. > > > > There is the AP the client initially connected to (A), the AP the client > > is currently connected to (B) and the AP the client aims to connect to (C). > > Though, it might be that A=B, or A=C. > > That indicates that A is the R0KH, B the current R1KH and C the new R1KH. > > > > With FT-over-AIR, C will contact A. > > With FT-over-DS, B will forward client packets to C, and C will contact A. > > > > Please double check the mappings in r0kh and r1kh. > > > > Regards, > > Michael _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap