On Thu, Feb 27, 2020 at 02:09:44AM -0500, Louis Garcia wrote: > Not sure if this is the right place to ask a user question. My > Qualcomm Atheros ar9462 is not sending my ssid when I start hostapd > and I get no errors. The kernel loads the ath9k driver and iw list > shows. I can scan an see local ssid, but I can't make AP mode work. That does not sound like a hostapd issue, so this mailing list is not really the best place for this. Anyway, I have AR9462 on my main desktop and it works fine for me.. It is not clear what you mean by "not sending my ssid", though. > * 5745 MHz [149] (18.0 dBm) > * 5765 MHz [153] (18.0 dBm) (no IR) > country_code=US > hw_mode=a > channel=149 Taken into account those "no IR" lines for other channels in this range, I'd recommend starting testing on the 2.4 GHz band first to make sure this is not caused by regulatory constraints. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
