On Wed, Oct 16, 2019 at 10:44:49AM +0000, Sergey Matyukevich wrote: > In repeater configuration, both AP and STA wireless interfaces may be > included into the same bridge. In this case the following race condition > may occur: wpa_supplicant and hostapd are started, then hostapd clients > are connected before wpa_supplicant connects to remote AP. EAPOL packets > between hostapd and its clients are detected by wpa_supplicant on bridge > interface, prematurely disabling the workaround. > > One possible option to fix this issue is to check EAPOL destination MAC > in wpa_supplicant and disable workaround only if EAPOL packet on bridge > interface is indeed intended for wpa_supplicant. Thanks, applied with a change to include EAPOL message both to own address and also to the group address to avoid breaking non-WLAN cases. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
