Re: [PATCH RFC] cfg80211: add new command for reporting wiphy crashes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2019-09-26 at 13:52 +0200, Rafał Miłecki wrote:
> 
> Indeed my main concert is AP mode. I'm afraid that cfg80211 doesn't
> cache all settings, consider e.g. nl80211_start_ap(). It builds
> struct cfg80211_ap_settings using info from nl80211 message and
> passes it to the driver (rdev_start_ap()). Once it's done it
> caches only a small subset of all setup data.
> 
> In other words driver doesn't have enough info to recover interfaces
> setup.

So the driver can cache it, just like mac80211.

You can't seriously be suggesting that the driver doesn't *have* enough
information - everything passed through it :)

> I meant that hardware has been recovered & is operational again (driver
> can talk to it). I expected user space to reconfigure all interfaces
> using the same settings that were used on previous run.
> 
> If driver were able to recover interfaces setup on its own (with a help
> of cfg80211) then user space wouldn't need to be involved.

The driver can do it, mac80211 does. It's just a matter of what the
driver will do or not.

> First of all I was wondering how to handle interfaces creation. After a
> firmware crash we have:
> 1) Interfaces created in Linux
> 2) No corresponsing interfaces in firmware

> Syncing that (re-creating in-firmware firmwares) may be a bit tricky
> depending on a driver and hardware.

We do that in mac80211, it works fine. Why would it be tricky?

If something fails, I think we force that interface to go down.

> For some cases it could be easier to
> delete all interfaces and ask user space to setup wiphy (create required
> interfaces) again. I'm not sure if that's acceptable though?
> 
> If we agree interfaces should stay and driver simply should configure
> firmware properly, then we need all data as explained earlier. struct
> cfg80211_ap_settings is not available during runtime. How should we
> handle that problem?

You can cache it in the driver in whatever format makes sense.

> I was aiming for a brutal force solution: just make user space
> interfaces need a full setup just at they were just created.

You can still do that btw, just unregister and re-register the wiphy.

johannes


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux