Re: Q? Configuration for EAP-TLS Auth + 4-Way Handshake

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 14, 2019 at 11:07:40PM +0000, James Ko wrote:
> It appears that to get to 4-way handshake I need EVENT_PORT_AUTHORIZED, which
> depends on EVENT_ASSOC with an WPA/RSN IE.  For "wired" devices which use
> EVENT_NEW_STA the EVENT_ASSOC is bypassed.
> 
> So it looks like wired devices only support EAPOL authentication followed by
> plaintext data.

Well, you can use MACsec as well, but clearly not a IEEE 802.11
specific 4-way handshake.

> So how can I get the PMK from the EAPOL Authentication MSK and trigger the 4-way
> handshake?
> Is there a way to add an association without requiring the IE?
> Any suggestions on how hostapd may be modified to enable 4-way handshake with
> stations added by EVENT_NEW_STA?

Why would you use the IEEE 802.11 specific 4-way handshake if you are
working with IEEE 802.15.4 MAC?

-- 
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux