Hi Ben: You need one STA and at least two APs (preferably on two different channels) to make 802.11k/v test cases. This is because Neighbor Reports are not very useful with only one AP (the connected AP), and 802.11v Transition Management requires at least two APs for non-MBO operation. While hostapd and wpa_supplicant contain most of the protocol-level functionality to send and parse the required elements in 802.11 management frames to support 802.11k/v, the logic implementation is not complete. For example, an AP central controller will send Beacon Report requests to a STA through different APs, then analyze the results to consider sending an 802.11v Transition Management request to the STA. At this time, Neighbor Report requests are sent periodically by wpa_supplicant, but Beacon Report requests (and Link Measurement requests) need to manually triggered in hostapd, as well as 802.11v TM requests. I guess we need something similar to the existing 802.11r "roam" and "ft_ds" CLI commands. To see the action frame activity without a packet sniffer, your test script can filter out the "RRM:" and "WNM:" results from the hostapd/supplicant log (with -dd enabled). Also note that if the WLAN chipset (e.g. ath9k/10k) is in firmware offload mode, the behavior may be different, and you may not see any action frames unless the RCPI drops below a certain threshold. Best regards, Dennis I'm trying to build some test APs and stations to do some experimenting with 802.11k/v features. Currently I have exactly one hostapd AP and one station. When I sniff the air, I see neighbor report requests and responses, for instance, but the wpa_cli output is a bit sparse: # ./local/bin/wpa_cli -i sta300 neighbor_rep_request OK Does anyone have an info on how to build a more useful test bed? Previously we built a cluster of APs to do .11r roaming, do I need to do that sort of thing to get interesting neigh report/requests to happen? Thanks, Ben _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
